Ronald
Forum Replies Created
-
A W E S O M E !!!
YOU have spear-headed and ACHIEVED what so many others have been unable to accomplish!
-
Luc the driving lights were given to me by a friend, so? I rarely use them now that I have Matts awesome easy to install JW Speaker headlights. Probably the best mod to date.I did all my ceiling and interior closet lights 7-8 yrs ago. I put LED lights in all the exterior bays. I have LED bulbs for my gauges but it hasn’t made to the top of the list yet.
-
It can be bought other places, but why not buy from Prevost? Their prices are usually pretty competitive.
-
Time for lube job, oil and filter change on the Detroit 60s, and oil and filter change for the genny. Collected some used oil and coolant samples to send to the labs for analysis too.
-
most of it from inside=when cut most of way around the glass goes to outside of bus. Your basically cutting a neopreme seal that holds glass in place. after cut 3/4 way around it will start to hinge to outside. Ck out windshield adheasive that comes in caulk tube to better understand how it works. If you know anyone that has suction cups to handle glass maybe they can help.. or visit harbor freight .
-
Hi Randall,
It will be interesting to see how you like the new Module on your Volvo.
The increase on their website is pretty substantial.
Safe travels,
Chris
-
It’s a thin piece of rubber below it is not cracked.
-
Very well done video. Interesting what he did.
-
I have a light on the dash of my coach that lets me know when the toad brakes are applied. It was easy to do. 1 87a relay and one wire to the dash.
-
I run Toyo M144’s They were 450 each, so far pretty happy with them.
-
LOL, I agree. I have no idea what they are for.
-
I hope your handy or $rich$. Better yet BOTH 🙂
-
Very interesting. Rick paid for the artwork so i expect he will be getting a cut of the sales.
-
We headed from AZ to TX today. Thought it would be interesting to pay a bit more attention. Set the cruise at 72 and see what the trucks do. I would say that 1 truck passed me for every 3 trucks I passed. Even the ones I passed were doing something very close to 70 (speed limit 75) as it would take some time to pass had I not accelerated to get by. I don’t believe anyone was doing less than 65 other than a couple that seemed to be having an issue as they were driving slow with their flashers on (flat ground).
I know nothing about driving a truck but would “assume” that if you are a company driver the company is paying for the fuel and you are getting paid for the mileage so the faster you get there the better. Then again, what do I know?????
-
Don, I ordered the OTR A/C idler pulley bearing, Prevost part# 507014 from Prevost Parts, $140. Thanks for your help and contribution to this forum. Darrell