Forum Replies Created

Page 1 of 9
  • Bill

    Member
    May 22, 2024 at 8:03 am in reply to: Kohler Gen 20KW – Not charging thru Inv #2

    Thank you Alex, will check…

    We use the gen extensively last summer going for service to Prevost/Quebec. A/C module failed and OTR A/C did not work, had to use the Cruise air, good possibility that something got loose from hours of running.

  • Bill

    Member
    May 17, 2023 at 9:56 am in reply to: – All 3 Air Tanks Leaking Down Same Rate RESOLVED

    Good Morning Art – I completely left out the fact that replacing the PR-2 valve was the fix!

    I edited the post to include the fact the PR-2 was replaced.

    THANK YOU for catching that!

  • Bill

    Member
    August 19, 2021 at 9:32 pm in reply to: Building RV parking space for visitors

    Good to know the pavers could get slippery. Of course grass would too but gravel should not. Of course gravel could develop ruts too.

  • Bill

    Member
    January 18, 2021 at 6:15 pm in reply to: Fuel splash back filling bus

    40′ didn’t have dual fill, Jon?

  • Bill

    Member
    November 10, 2020 at 5:37 pm in reply to: BUSES ARE FOR DRIVING

    On Monday, the Liberty is heading westward along I-40 to California!

    Its 1,750 miles door to door and the weather is showing perfect on the extended forecast!

    Can’t wait to get back in the bus! The odometer is going to go over the 60,000 mile mark!

    Mark

  • Bill

    Member
    July 9, 2020 at 12:17 pm in reply to: Just introducing myself

    Larry is 78 & I am right behind him ..I believe there are a few older members too ??

    Cheers, Diane

  • Bill

    Member
    July 8, 2020 at 6:26 pm in reply to: City water

    Buddy, what happened to your Avatar?

  • Bill

    Member
    May 20, 2020 at 11:32 am in reply to: Prevost Updated Tire Program

    Bill

    if you check michelin truck tire pressure chart, you’ll see a separate weight and pressure chart for 315’s mounted on 8.25 inch wide wheels. Remember all of us with XL’s and XLII’ have inner steel dual wheels are 8.25, the alloys are nine inches, and the fat tire wheels are wider yet

    when we had our 1992 XL Beaver, we placed 315’s all around

  • Bill

    Member
    April 18, 2020 at 7:49 am in reply to: Amana fridge

    Ed,

    3500.00 labor, yikes, you need to talk to Jeff.

  • Bill

    Member
    March 21, 2020 at 7:06 pm in reply to: Oysterfest – Yes or No

    I figure I have a much better chance by eliminating the Sprite and going with straight Bourbon. So far it appears to be the perfect panacea. More news later!

  • Bill

    Member
    March 6, 2020 at 7:51 pm in reply to: Another radiator leak!

    Sorry. Should be on now.

  • Bill

    Member
    February 1, 2020 at 6:05 pm in reply to: West Palm Beach Prevost Show

    Kathy and I will also attend. Looking forward to it!

  • Bill

    Member
    January 31, 2020 at 3:01 pm in reply to: Drive Axle Hub Inner Seal Leak

    Drive Axle Nut Socket……….4″

    Steer and Tag Axle Nut Socket………2 1/2″

  • Bill

    Member
    January 31, 2020 at 10:55 am in reply to: Solar Eclipse April 2024

    Looks like we’re going to have plenty, I’ll go to work on this first of next week. I would today,but starting to party up for the Chiefs upcoming win on Sunday.

  • Bill

    Member
    September 30, 2019 at 6:18 pm in reply to: I-84 in Connecticut

    I84 goes for a while (well in NE travel terms), what part of I84 you looking at stopping? If you make it up into MA, there is a Loves/ Sturbridge Isle (used to be an actual truck stop before Loves, FJ, TA made them a thing of the past). Lots of parking, not a lot a traffic after dark. Just after the CT/MA border in Sturbridge MA.

    As for rv parks? I would take a truck stop any day in that area… especially for just overnight. Run that generator, blow the carbon out of it and you will get about the same quality of comfort as anything else up there provides.

Page 1 of 9