Todd
Forum Replies Created
-
I removed the control valve
check valve can’t be wrong as the belts have held tension for over three weeks and then when I took it out to exercise the coach the next day belts were loose.
This is a repeatable event over the last couple months.
Air up the belts thru the schrader valve and belts stay tight. We have had them stay tight for over 6 weeks. then take it out for a road exercise and the next day belts are loose.
-
“
” I recommend going to all the sites with Prevost For Sale to get ideas. “
I did, found some cool stuff, and picked out a 1.8 million dollar coach that is just PERFECT. There is just the small issue of 1.7 million dollars…What Im finding is I really like whites and grays. I like bright colors, but as someone mentioned…when they are pillows and rugs and I can change them. I think thats a solid plan.Ive got an upholstery guy that will recover my couches and booth, as well as the window valances for less than $2k, he does good work to. -
Burro QB!
yep! Me! 24855
What’s the plan?
JC
-
Welcome aboard Ron, can we call you Shorty?
-
Detroit Diesel in Ocala Florida
-
Todd
MemberApril 7, 2020 at 11:03 pm in reply to: Marathon Techlon Free Trouble Shooting from NoviceSome years ago, one of my light switches stopped responding. The output node still worked when operated manually but it did not recognize the network message from the switch. Since I was on my way home, I stopped by at Marathon. Hooking up Marathon’s refrigerator-size network analyzer and reinitializing the network fixed it in 10 minutes.
I did not get a clear answer from the tech as to what the issue was. It sounded like the Techlon node or the encoding switch had lost its assigned network ID. Maybe a stray alpha particle hit an EEPROM memory cell…. Other than that one glitch, the system has been very robust.
Just from the looks of the wiring closet and the nodes, it seems like the Techlon system is a multiplexed serial bus network using Ethernet cables and probably some form of I2C or early CAN bus (controller area network) protocols over twisted wires. It was pretty advanced 20 years ago but nowadays all our cars are infested with these type of CAN bus networks.
In terms of overall life expectancy, a system like this needs a way to store information while the power is off. There are memory cells called EEPROMs (electrically erasable programmable memory) that do that. The problem is there are limits on how many times you can rewrite EEPROMs. Say 50-100,000 times. So, every time you reset the light intensity for a particular circuit you get a little bit closer to the limit.
By the way, the same limit applies to solid state disks in your phone or laptop. That is why we all should do backups of our data.
The infamous DDEC “Code 53” Non-volatile EEPROM error is another instance of this issue.
-
Looks like a D-2 Bendix air compressor governor to me
I wouldn’t just plug it either.
Here’s a link. It’s on p.16
Bendix Quick Reference Catalog
You can order one on Amazon and have it in a day or 2.
They make repair kits too.
-
First I have an Angola, orphan, not a Royal orphan but they are similar vintage with simple roots.
i could not determine the routing for may rear camera cables and ran new ones instead. It is unlikely the existing cables are in the aforementioned conduits and I would not run them that way. Save those for chassis stuff as intended by Prevost.
many of my cables run in a chase along the floor. If you have over the road ac, the converter likely built an oversized box to cover the metal Prevost air duct on both sides. Cables are often run on top of duct under the cover.
I have been able to run new cables from front to rear using this chase. It is a long and winding path. New cameras required 65 ft of cable. You may need to route from the console up the door post, over the door, down to the duct, to the rear, and then back up to the camera inside cover. In my case the duct cover stops for the refer cabinet and so it has to come out to run new cables.
You will need to find access points and be creative to make this happen. Good luck
-
From my NAPA Parts days. Hose is not a common coolant hose.
Searched all possible sources.
Propriety SKU to Kohler. Sorry wish I had better news.
AL
-
Thank you, Jim, for lots of good information. My baseplate is Blue Ox and does have the removable tab inserts. Maybe it is because our toad is small and light, but I have no noticeable movement when pulling. It tracks great and we never feel the 2400 lbs back there.
I am keeping the same toad for now and I am not going to go through the trouble to change the baseplate. Any tow bar I buy with have to be adapted which does not seem to be a problem.
Thank you, Per, for the recommendation of the Nighthawk. I will check it out.
Davy
-
my friend is driving back up to Oregon to get the back of the bus repainted. I am driving down to help him get around and find a new tow car.. I also googled and searched for information on the fire … i also didnt find anything …. if and when I find out more I will updated….
-
Not to worry, Joel.
We will not say a word to anyone. This will be strictly between you and about 4300 of your closest friends.
-
On my 87 with OTR the solenoids and circuit breakers were in a box attached to the ceiling of the first bay.