Joshua
Forum Replies Created
-
Thanks for the confirmation Don, i will pull out the fridge and see whats going on, i was aware of the start and run capacitors on the compressor under the bumper as i replaced a compressor unit on the front unit last year but wasnt sure of the condensor fan, Thanks again !
-
Well, we fly out Friday to St. Louis to pick up our 1999 H3-45 Vantare buddy. Feels right so we will keep you posted!
-
As long as I stay in Texas or surrounding States that honor my LTC, this is what I use. It ain’t Laughing Gas but close. When outside and away, a nice Colt 45ACP does the trick. I’d laugh if these saved me.
-
What was the price on the compressor from the local business?
-
FYI…..Marathon Coaches all have a 50A breaker between the street service and the transfer switch. I have scratched my head for years why they did that, but must have been a forward thought….
Also….the RV Resort I own in in Florida has started installing 60A breakers for all their sites. Wires are properly sized for the 60A. I have heard rumors that the new Featherlights are spec’d at 60A for shore power.
-
Great job Don! It looks brand new!
-
I have the 50dn that’s 12v which I think was 24v converted to 12v but the plate is worn off. I have a wakespeed ws500 controller for it so I can see the output and control by temp. I don’t feel any difference when it’s running full power or not. Get close to 3000w from it to charge the batteries.
BTW the wakespeed allows me to set all kinds of controls and charging profiles like limiting the output if I want. I have it set to wait a few minutes before it turns on.
-
I can tell you mine is exactly 12′ 11″ at ride height. The measurement is taken at the top of the DishTV dome which is mounted in the dip at the from of the coach. Have never taken a measurement when lowered.
Chuck
-
Do you have a separate 12V disconnect
-
1. removed passenger seat, soon I will be installing a new fridge and want to remove obstacles.
2. Pushed bushings out of calipers, that was fun
3. Sanded new table top
4. Modified dinette seat bracket, mocked in the dinette.
5. Organized parts to align with what axle they go to.
today i will be making the fridge opening bigger, need to clean inside the bus also, wire wheel the front axle and might start making a box for the entertainment bay, i have house batteries to swap and need to pull the microwave.
-
I was just at Marathon San Antonio for 2 weeks getting new to us bus tweaked. Even Marathon couldn’t fix my ceiling accent lights. I miss the WOW factor at night time.
-
Thank you for that, I will research that location.
My wife is a retired teacher and did volunteer work with children a couple of decades ago.
She has her eye on an area called Bucerias about 7nm North of Puerto Vallarta to work with some children there.
My concerns are two-fold, safety and Prevost low ride height regarding roads, I don’t want to go very far on any washboard roads.
If anyone is involved in this type of humanitarian work we would love to know about it.
Cheers, Tom
-
Hello all, I have water ingress both in the electrical bay under the driver seat and on the passenger side by the entry stairs.
I am fairly sure it is the sealant in the grooves where the gutter stops above the drive and passenger sides.
I have pulled out as much as I can with the intent of resealing.
I would like the clean out the bits of rubber (or what ever it is) from the grooves before applying new sealant.
1 What will dissolve this rubber type sealant?
2 What sealant should I use to reseal the it with?
Cheers
1995 H3-40 OTR
-
Hi yeayeaatou,
Do you have a link to the builder you mentioned?
-
?
Last post here was Dec. 2020?