Jim/Chris
Forum Replies Created
-
Being serious here……I think a bonded construction has significant advantages, but if there are issues the rivet repair is the ideal fix.
Products have been assembled using bonding for a very long time, and those techniques have been very successful. Nobody hesitates to get on a plane, yet for decades almost every plane has used components that were bonded.
The rivets however are an excellent substitute but in superceding them with bonding some of their drawbacks have been eliminated. The major problem from my perspective is the “oil canning” and the noises associated with that as the coach heated or cooled in the presence or absence of the sun.
There is no question the smooth sides of the bonded skins have not only a nice appearance but the noises associated with a skin that is being heated or cooled are gone. If my bonded panels show signs of delamination I will have them repaired using the rivet method now being used, but my coach was repaired just prior to the development of the rivet repair and I see no signs of delamination so I feel as Robert has posted that whatever issues there were on some coaches, those are now gone.
So, Jim and Chris……..time to step up to the plate and buy that new X3.
-
Mr. Flyu2there … none of those actions taken by the TSA or the airport make me feel any safer; but I think you knew that.
-
I can see you guys are going to be a problem. Tom’s carrying the full load while we are galivanting all over TX looking for warmth. There is no place where it isn’t cold.
Just say rivets and this thread is back on track. Rivets, rivets, rivets. No drift here.
-
Now that funny 150 head of horses and beef cows and they stay outside all the time but I bet my wife brings milks cows 2 of them in the barn and starts the wood stove so it’s 75 degrees in there and sleeps with them too , soo much for snuggling with her tonight
-
I asked him if he had a pan heater and he didn’t know, he thinks it’s just a block heater. What I found scary was the inside explosion. I don’t remember the term he told me the inspector used but 3 slides were out and it blew them out of their channel and blew out the windshield. I’ve been around a lot of cold weather trucks and I never heard of a pan heater. We put charcoal under the pan and lit it. The good old days.
200 gal of fuel on board, didn’t burn.
Later
bv
-
seems a good number of people looked at that coach. My wife and I looked at that one a couple months ago. Very nice coach indeed. If we were not looking for a 45, it would have been a much more serious look.
We didn’t know much about Liberty Coaches then, but with some coaching from Tom and a lot of studying seems one can’t go wrong with a liberty. We love ours and its only been with us for just under a month.
-
Yup but you better act fast or you wont get a spot.
-
Charles,
Your compressor is in a little sound box ahead of the steer axle I think. If it is like my aux compressor in my 97 coach it made some rattling sounds as pressure built, and it would smooth out and make less noise as the aux air system pressure built. I think what you describe might be normal. Having said that however it would not hurt for you to get the coach warmed up when you can so everything is above freezing and drain the entire coach air systems. Unless you know for sure the air system was properly maintained you have to assume otherwise.
BTW, the same goes for cooling system maintenance, and if you lack maintenance records showing that was maintained assume it was not and put it on your to-do list.
-
Happy New year Bob thanks for all the help ,May the sun be in your face and the wind at your back !!!!!!!
-
Jim/Chris
MemberDecember 14, 2013 at 7:26 am in reply to: How Long Does It Take To Remove Front ClipI agree with you Jon buying at auction you take risks it is sorta like getting married it’s for better or worse I had both from sales
-
I did not notice in the report if the test track was elevated or not, gary
-
Jim/Chris
MemberDecember 13, 2013 at 8:14 am in reply to: How Long Does It Take To Remove Front ClipMy sources say there will be 4 Prevost units for sale at the Ritchie Bros sale in Phoenix in Feb they pop up at Ritchie Bros often and you don’t need to be dealer to buy
TNT sometimes require you be a dealer sometimes no you need to check their fine print before making a trip to bid with them
The odds of buying a better trouble free unit a good dealer would be your best bet because buying at a sale it belongs to you and a test drive is out of the question
-
My understanding is that the fuel pick up for the generator and the Webasto or Aqua Hot is set in the fuel tank further from the bottom of the tank so as not to use all the fuel.
I think on my Webasto when it reaches this level, or can not pick up anymore fuel, the unit will try to start a set number of times and then time out.
-
Yes, Oregon fuel is spendy. But, they have created some beneficial employment opportunities. Guess that’s a good thing, job creation.
-
Jim/Chris
MemberDecember 7, 2013 at 8:40 am in reply to: Myakka River Resort Photo’s – Pt. Charlotte, FLAlvie – We can’t beat that deal!
Richard – Not many here right now, maybe 20 – 25, but they will get busier by January. Since they are new, I’m sure there will be plenty of sites available during the season. Once this place catches on and folks realize it’s here, that will likely change in the future. There is a 35 coach rally here next week for 3 days. The prices are less than comparable class A resorts.
