Jim/Chris
Forum Replies Created
-
Tom, Do you have any guesstimate of how many PCer’s there might be at Pelican the 5th&6th of Feb ?
-
Hey Al: Want to come up here this week and upgrade mine too? I have room in the driveway for you to park your coach while you do the upgrade. I would pay for the bulbs, no problem…..
-
They are likely on the converter’s house circuits.
Back when your coach was built everybody was advocating as soon as you were parked you should turn off the chassis switches, so my guess is the converters put the bay lights on their circuits.
-
Carole/Will & All, I was less than happy with the output of my cruiseairs (sister ship to Wills) and stopped by Wolf Creek Marina in Mobile, AL enroute to Oyster Fest 2011, They let me stay for 3 days for free (like that), had the 3 units cleaned,serviced and shiny (Jon should like that) in about 1 hr. Cost was very reasonable. I would suggest a Marina that services the bigger boats. I did and would again.
-
I’ve towed a Tahoe for the last 6 years it’s easy and has plenty of room!!
-
In september I replaced all the old foam soundproffing in the generator bay. This foam was crumbling and had become dust and being sucked up into the air intake of the generator. The foam completely clogged the electric exhaust fan in the a/c bay. Had a broken exhaust pipe.The operating temperature of the generator ran typically around 185 to 195 degrees. depending on ambient outside temps and load on gen set. I always thought that was a little warm.
Replaced the soundproffing, left the 1/8″ led sounddamping and added a 2′ high density plasticfoam batts (looks like a crossection of a aero bar) and covered with heat resistive insulate silver reflective filiment. New exhaust custom heat blanket and 2′ stainless exhaust pipe. Installed a new electric exhaust fan that was located in A/C bay. The function of this fan was to remove heated air from the generator bay and piped the heated air out through the floor. Three intake holes in floor at the rear of the generator bay, pulls cool air from the outside beneath the coach and across the generator. Great system when everything is working. Replaced generator air springs.
Wow big job……. 4 days of work, and also used a skid steer to remove and stabilize generator.
$1700 later, well worth it. Operating temp is now 145 to 150 degrees…… didn’t believe the temperatures and used my temp gun on generator coolant manifold to confirm…….. same temperatures as gauge…. very happy and worth the effort.
Peter, I know exactly what you went through. bent like a pretzl. My back hasn’t recovered. Squeezing myself in a bay that is two times smaller than me. LOL
Darrell
-
The time for disconnect from the server is now set at 9 hrs. After you have been logged in and absent for 9 hrs, you will have to login again.
It’s a security measure…
-
Have just the 160 gallon on mine. Probably would go into sticker shock if I had to watch that fuel pump gauge keep a clicking.
-
There goes Prevost’s profit for the year. I’ll bet Robert and Prevost were ready to sell you that X3.
-
The count as of today for the Tampa Rally is 45.
-
AL
three months ago I bought 8 of these leds on Ebay for $9.99 with free shipping I still have 6 in the coach. I installed one by the entry door.
I gave one to Jim ( the TV guy) at Marathon St. Antonio and kept the rest. The back up lights are the same bulbs, I will be changing them as well when I have the time.
I don’t understand how I was able to go to work, I am retired but can’t find the to change two bulb, go figure.
-
Darrell,
I’m the guy that Tom C referred to. On my 94′ as Tom mentioned, there is a panel behind the steer axle that can be removed to access the aux compressor. There is no foam on the panel and can be removed by loosening about a dozen screws. If you remove the panel, it will likely have a seal between it and the bulkhead. If there is no seal, I recommend you install one before replacing the panel. As to maintenance, the air filters will require a periodic cleaning or change out and of course frequent draining of the air/water seperator in the steer bay. My compressor is a Gast and is noisy and I have reduced the audible level inside the coach by upgrading the soundproofing and vibration dampening. If you must replace your compressor, you might want to take a look at those manufactured by California Air Tools. They are coming out with a new 1 hp compressor, Model CAT-MP100LF, that is suposedly a continuous duty machine and is very quiet – 60 decibels. This compressor will retail around $240.
-
I haven’t been under since October. I don’t recall a panel. Your refering the location of the panel on the bulk head ahead of the axle. That would be awesome if located there to access.
It would be great to have an access panel large enough to get at a few other issues like my floor slide ram.
Thanks Tom
-
The jetpaq model pump, which was the oe on my 2000 Liberty, has a built in accumulator tank…the Mach 5 does not.