Jim/Chris
Forum Replies Created
-
Nice job Jerry, I like that extra clamp…
-
Long time members will remember that I had mine upgraded in February of 2012. I pull a trailer in the warmer months for our ministry activities and I had been pulling a trailer that was 9500 lbs fulling loaded. We were blessed with an opportunity on a great deal on a nicer and bigger trailer but I knew the bus would have to be upgraded.
I had read too much and saw too much to take a chance on going over the limits Prevost had set for my coach. I have too much invested to ignore good advice. This Link is part of that discussion.
I called Prevost Nashville since I was already having some work performed on the bus there the next week. They scheduled me a day early and four days later the new engine cradle was installed. It is a big job and expensive but I am so glad I did it. In order to pull the bigger trailer I HAD to do it but for me it was worth it even if I was only bumping up against the limit.
The new cradle is rated at 20,000 lbs and 2,000 lbs tongue weight. It cost about $6500 in February, 2012.
DKO
-
“Heck what am I going to do with all this money anyway”
Buy me a bus. I will sincerely appreciate your kindness and take very good care of the bus.
-
The Aqua Hot did start the fire it belongs to Richard Anderson of Phoenix he has a donor bus the front wheel caught fire a 2010 model he has 2 or 3 more damaged Prevost he has bought so he has plenty of parts but he is still going to have a bus with a salvaged title that is going to be hard to sell when the time comes
good luck
-
Dick,
I think I have covered about every one of your suggestions and then some,I am going to try and open a thread that includes all the options I have requested in and on my coach and interior.Thanks for the suggestions,I appreciate them.
Robert
-
Paul, I think any large and varied collection of Prevost coaches that you can look at is going to make you a more prepared buyer. With the experience of having been in a variety of coaches you develop an understanding of the various floor plans and how the floor plan, the type of coach and the systems work for your specific needs.
At a busy show where the object is to sell coaches it is going to be difficult for you to spend a lot of time with the salesmen because they just cannot addord the time. It is almost impossible to get objective information from owners, because they aren’t going to wander around the show room floor with badges identifying themselves as owners.
The show will be valuable in the sense that the photos you see on the internet will make a lot more sense. But the best way for you do make an informed purchase is to try to get to any large gathering of coaches and their owners. Even owners tend to be biased and protective of their coach’s reputation so you still have to do some of your own homework, but at a rally for example when you run across those who have owned multiple coaches you tend to get very good information to help you in your future purchase. Those who have owned several coaches from the same converter prove by their actions how satisfied they are with that converter. Those who have owned multiple coaches from different converters have a unique ability to offer comparitive information. You get this at rallies and instead of someone posting a response on an internet site, you get a one on one conversation at a rally for example with information some prefer not to state publicly.
If you cannot get to a rally such as one scheduled for your busy time of the year, ask questions on the forum and then take the conversation private if necessary. We lose out when the conversations go private so I can’t encourage that, but I understand some things are not to be said on an open forum.
Now that I have encouraged you to seek out other opinions regarding coaches, here is the important part. You and only you can decide your budget, how you intend to use the coach, and your wants and needs. Others can fill in the gaps in knowledge, but the bottom line is that you have to make your own decisions and not allow yourself to be led into a coach that might be ideal for someone else, but not you.
-
The next project is a 57 Chevrolet Dually with a flatbed rack body on the back.
A friend of mine takes projects that people tell him they are to far gone and creates daily drivers, the silver truck in the background of the bucket is one of those projects he did for himself.
then I went to Hunter N.Y. And got a 50 ford F1 that was sunk in the dirt in a barn that another friend had learned how to drive on many years ago and he rebuilt that into a daily driver.

-
on the heat follow the flow foward–ck for valves–maybe 2 in drivers side engine compartment ahead behind rad— reach in…. dang Canadians on BNO board had small snow flakes —- though my eyes were going…Happpy thanks Givings… Family time soon!
-
Okay… the angle of the tow bar may be where the problem could be. The receiver hitch (Roadmaster) for the Honda Fit is at 14″ above the roadway; the tow bar on the back of our coach is at 14″ in the parked/resting/lowered position. Therefore, the angle of the tow bar would be greater than the 3″ difference which Jerry speaks of in the road/drive position for the coach.
Ron any other info or photos on the one you set up
We appreciate the feedback… just doing some research before spending the money to set it all up.
-
Here’s what came to mind as I watched that………..if we drive with cruise control our foot may not be anywhere near the accelerator pedal. Something to be more aware of.
-
Throw rugs are just on floor for protection.. need that finishing touch that I lack.. We have allot of storage under couch and every space is used. Life is a adventure! Bob
-
You should have some spare wires run from front to back by Prevost. Or maybe the King ran Cat 5 for all his Bling Lights!:)
-
Where you stay in Ocola? We are norm there in March at Wilderness.. Also make trip to Plant City for Strawberries–Sand Ridge there. Bob
-
what does the term “runout” mean?