Forum Replies Created

Page 10 of 26
  • Jeff

    Member
    June 30, 2022 at 6:23 pm in reply to: Red engine light shut down

    Problem fixed, details later!

  • Jeff

    Member
    June 4, 2022 at 6:37 am in reply to: 2001 Marathon Techlink issue

    Glad that worked out. Wish I could say I have never done such a thing. Keep Brian’s number handy. He designed all the techlink systems for our vintage coaches for Marathon and is incredibly patient and helpful. His knowledge and ability to help are amazing. Mike

  • Jeff

    Member
    June 3, 2022 at 7:58 pm in reply to: 2001 Marathon Techlink issue

    You need to see if you have the tech link video feed going to the TV (my 01 Marathon had the tech link on the TV’s) to see if you are switching screens even though the dash display is not working. I don’t remember all the components in the system, but I could pick up techlink video output in several places on my H in the rear electrical cabinets. You may just have a loose video connection since you had it apart.

  • Jeff

    Member
    May 30, 2022 at 1:08 pm in reply to: NEED RADIATOR 1997 XL 45 LEMIRAGE BADLY!!! CHEAP!!

    My guess is the small one is a cooler for trans or power steering, the large one is a condensor for dash ac.

  • Jeff

    Member
    May 28, 2022 at 6:06 am in reply to: Time for a newer bus, only live once!

    Tried to contact Olympia for the 2012 Foretravel, 2011 American Heiritage OR 2004 Royale – no reply to email, phone call & contact us links on their web page don’t work.

    So found a nice King Aire. Seller replied within hours, allowed me to spend weekend at his home with full hookups while looking over his coach. I pickup June 5th.

    Thanks for the helpful and friendly comments

  • Jeff

    Member
    May 23, 2022 at 7:45 am in reply to: Fan clutch

    Hello Jon – did you change the clutch yourself? Did you remove the radiator? I have not yet found any tips or YouTube videos on how to do it, and I now have to change mine and pretty quickly as have out of state trip coming up in about three weeks. THANK YOU for any details you can share.

    “Make sure the larger diameter of the new clutch pulley does not make the serpentine belt contact anything on the clutch support.

    When my last clutch was replaced the belt rubbed against the clutch support housing, and despite what I was told, Prevost did not issue a service bulletin to describe how some grinding of metal was required to provide belt clearance.”

    Jon and Di 2006 Liberty Elegant Lady,
  • Jeff

    Member
    May 23, 2022 at 7:11 am in reply to: TSD fuel limits

    Hi Alex, you are welcome to call me between 8 and 8 central time and I can give you a quick briefing on the ins and outs of how to use the card. Plus, if needed, I can send the application to your phone as text or computer as an email.

    This will give you a lot of experience in just a few minutes on phone, not at the pump. I even know your control number and you do not have a card yet.

    Talk to you then if you like. Rudy 7 one 3 8 one 8 3234

  • Jeff

    Member
    May 20, 2022 at 6:13 am in reply to: Park Brake Valve Difficult to Release

    The orings in the valve can get sticky. Squirt a little WD49 or similar at the shaft when it is up. Exercise ti several times, it may free up.

  • Jeff

    Member
    May 11, 2022 at 8:20 am in reply to: Saw this and Jon came to mind

    Poor Jon, always getting picked on.

  • Jeff

    Member
    May 10, 2022 at 12:34 am in reply to: S Belt Pulley Bearing Replacement

    Don-

    Thanks for the good intel. I will check both items out on ebay.

  • Jeff

    Member
    May 3, 2022 at 8:45 am in reply to: Spring Wash and Polish

    Dick,

    No, it has never been a seated coach. At least according to the records and the VIN which shows MH from initial issue.

    Ron

  • Jeff

    Member
    May 2, 2022 at 8:23 am in reply to: what did you do to your Bus Today

    Robert:

    What is your go to favorite leak finding tool?

    Chuck

  • Jeff

    Member
    April 25, 2022 at 8:18 pm in reply to: Eliminate fan belt tensioner air cylinder

    Chad, I have a mechanical tensioner on my Radiator Fan gear box, I can send you a picture of mine if you are interested, Basically a tube with one side right hand threaded, and the other left hand threaded. Prevost might have the parts in stock.

  • Jeff

    Member
    April 22, 2022 at 10:40 am in reply to: New member – Looking for Information

    Bill, a 45′ is attractive to me but my wife doesn’t want to be limited on where can set up camp, so to speak.

    Just out of curiosity, does anyone know the approximate cost to rebuild an 8V92 engine? How about the cost of a new engine?

    Dick, I hear you on the propane thing. I’m a retired fire fighter/fire inspector. Propane definitely has its hazards.

  • Jeff

    Member
    April 12, 2022 at 5:31 pm in reply to: TOOLs for Washing BUS

    Hi Luc – Google “CR Spotless”

    They offer portable deionizer systems for a true spotless wash.

Page 10 of 26