Forum Replies Created

Page 9 of 26
  • Jeff

    Member
    September 18, 2022 at 10:41 am in reply to: EMERGENCY EXIT PLAN

    There is a bigger concern. The entertainer’s bus (Montgomery) that laid itself on its side on I-75 a week or so ago puts the side windows that could be used for escape 8 1/2 feet high. In that case the best escape is to punch out the windshield.

    Different issues require different escape strategies and the best time to be prepared is to mentally review all of the what ifs. An inoperable front door with the bus upright is a good reason to exit from a window, but what if the bus is on its side, upside down, on fire or any of the other possibilities?

  • Jeff

    Member
    September 13, 2022 at 10:32 pm in reply to: Need Cruisair Info

    Les:

    Just received an update from the company. Finding a reliable and energy efficient compressor that will fit in the current Cruisair box and yet allow enough room for a larger condenser and adequate size fan is a challenge, but the company engineer is determined to make it happen.

    Stay tuned for future updates.

    Chuck

    P.S. Working on making never unit compatible with minimal changes in existing evaporator’s and thermostat’s

  • Jeff

    Member
    September 3, 2022 at 2:43 pm in reply to: Need Cruisair Info

    Terry… significant discussion over months, yet nothing in writing – no part numbers, etc. He did have the over-sized coils custom made. Rick was a super nice and super special person. “Super special” in terms of liking to tear things apart and improve them.

    We made a trip to Arizona this past spring that included two weeks in Camp Verde, and Rick came up in his bus to meet Sandy and me. Sure had no idea that meeting would be our first and last. VERY SAD indeed.

  • Jeff

    Member
    September 3, 2022 at 1:57 pm in reply to: Need Cruisair Info

    Jeff:

    Sorry to hear of the passing. Thank you for the input. In our preliminary discussions we agreed with what you have just expressed that size matters and don’t change it.

    Will forward the pictures and info to the company’s R&D department.

    Chuck

  • Jeff

    Member
    September 2, 2022 at 1:51 pm in reply to: Drivers Side Window Removal

    I watched mine replaced you do not have to take off trin as I Remember

  • Jeff

    Member
    September 1, 2022 at 11:30 pm in reply to: Need Cruisair Info

    Speaking of limited space, does anyone know what’s in the space above the “spare tire” spot that’s behind the bumper? I’m hoping that spare tire spot an be expanded upward to fit a typical residential mini split condenser. Otherwise, the coil will need to be reworked at an angle.

  • Jeff

    Member
    August 25, 2022 at 4:41 pm in reply to: Need Cruisair Info

    I haven’t a clue??

    Call the converters that are still in Business. Call the independent service providers. They’ll give you some good info.

    Good luck and thank you.

  • Jeff

    Member
    July 25, 2022 at 8:42 pm in reply to: ELECTRICAL FIRE WARNING – 20w Halogen Bulbs

    Very blessed indeed, Chuck! I was shocked to discover it.

    And, WOW on your fire fighting info…really makes one think / be mentally prepared for a quick exit.

  • Jeff

    Member
    July 25, 2022 at 5:13 pm in reply to: Emergency braking event

    Ck. the ground, be sure transmission module

    , is grounded to the body.

    as far as RPM is concerned that’s could be a

    throttle positioning sensor. Hope this helps.

  • Jeff

    Member
    July 24, 2022 at 1:51 pm in reply to: executive coach conversions

    Executive Coach, Fox River Grove, Il. I owned a 1989 Executive Coach for 10 years. Sold in 2011. e-mail me if you would like any info. Darrell

  • Jeff

    Member
    July 17, 2022 at 6:56 pm in reply to: TA TruckSmart – no swipe fueling

    So the only advantage is that you don’t have to take 1 second to push the card in and pull it out again? I know that sounds snide but I really want to know.

  • Jeff

    Member
    July 16, 2022 at 7:44 pm in reply to: Prevost 45′ XLII Fire?

    As for the TOAD fire

    Had a friend tow a TOAD and forgot to disengage the transmission before towing. He came close to a fire, ruined transmission and melted most all of the wiring under the dash.

    Might not have been brakes.

    Chuck

  • Jeff

    Member
    July 10, 2022 at 11:03 am in reply to: Getting the demons out, one at a time……

    I experienced the issue on the way to ETLC where we were putting on a seminar. I could limp in 1st gear and since it happened 1/2 mile from home I initially decided to go home which required an 8 mile drive “around the block”. But by another mile the condition cleared and the transmission shifted normally.

    It turned out to be the transmission speed sensor which Jeff diagnosed and changed. It was a fast fix and now 3 years later never repeated itself. The wiring was good.

  • Jeff

    Member
    July 8, 2022 at 10:48 pm in reply to: Alignment

    Art you need a shop that can align all three axles

    If they don’t align the whole coach you ae not getting a complete alignment

    Follow some of the trucks on the road and you can see the tractor with trailer hiding one side of the tractor going down road. the rear axles are going in the opposite direction 0f the front axles. Many shops don’t have the alignment equipment to do full alignment

  • Jeff

    Member
    July 5, 2022 at 1:00 am in reply to: Red engine light shut down

    I did indeed think of bypassing the oil sensor with a jumper. I did not make that my first shot at getting back going because as Jon said if there really was 0 oil pressure the engine would be toast.

    I do have an OTC engine/transmission oil pressure test set, but it was at home on a shelf, doing me no good on the fateful day.

    I bought a pressure test guage at OReillys while I was in Farmington. This is not really a test tool, but designed to be installed in a vehicle to give a mechanical analog reading of oil pressure. Comes with a 2″ gauge, some very small and fragile looking hard plastic tubing, matching compression fitting on back of gauge and a provided matching 1/8″ male compression fitting as well as a 1/8″ to 1/4″ brass bushing. Just what I needed to test oil pressure, the oil sender hole in block is female 1/4″ pipe. I detailed what I planned to do with this in my last post, but ended up not needing to use it. I mentioned earlier, I am likely going to install a mechanical oil pressure gauge somewhere visible on the engine. I may use the gauge from this kit, but will likely install it with a manual shut off small ball or needle valve between the engine oil pressure source and the gauge. I just don’t fully trust a $26 dollar gauge from China enough to add it as another potential oil leak point carrying full engine oil pressure going down the road.

    https://www.oreillyauto.com/detail/c/equus/equus-2-inch-pressure-gauge/equ0/8244?q=oil+pressure+gauge+analog&pos=3

    Had I not been able to get a new sensor, but could get the oil pressure verified with the above gauge, I probably still would not have jumpered the wires unless I could have gotten verification of which pins to jumper. The wiring diagram in the link below shows a ground, an EOP (engine oil pressure likely) signal, and 5V+ as the three wires connecting to the sensor. My fear was as the other end of these wires likely connected to the ECU, if I sent aberrant voltage (the full 5+) or grounded the signal lead to the ECU there was some risk of frying the ECU.

    My guess is the Sensor functions by an internal transducer varying the signal voltage from some low to high value based on the oil pressure it sees. Maybe some day when I get a spare moment I’ll put together a set up shown in the 5th box in the link below with my yet to be purchased spare oil pressure sensor and see what happens with signal voltage as pressure varies. I’m not holding my breath until that day.

    As Lonestar said he was going to do, I am going to buy spares of all three “shutdown causing” sensors and install the other two, next time I get to working on the bus at home.

    https://www.google.com/search?q=detroit+60+series+oil+pressure+sensor+wiring+diagram&rlz=1C2CAFB_enUS605US605&sxsrf=ALiCzsbLyHx9SraZ2eYWl4K_mxIu1Va-0g:1656977238764&tbm=isch&source=iu&ictx=1&vet=1&fir=EhvsOp3X2uu4HM%252Cwdr0_Le5AoSBGM%252C_%253BGxYEEQQQ7zX1IM%252Cx8Ys3p8LDit7OM%252C_%253BFChvVEqnY0FTmM%252CEq1UMaDqtHtTDM%252C_%253BMvuW2ttyvUrDGM%252Cct59qqx7LUaPSM%252C_%253BTvu8t2ZJ4P91-M%252CyYM3rI6GmRzotM%252C_%253BMf4nqWHK5g6QkM%252Cx8Ys3p8LDit7OM%252C_%253BresySrFpMfQePM%252CPent0rbmuSve9M%252C_%253BzaHICMH3CFjNBM%252CcwHUz38vOZTgdM%252C_%253B3Y5P1SpA_udH_M%252C2ZIcoCE_AdHk3M%252C_%253BhLMqmDyrKya4pM%252CkDS9Wp4sY8XRhM%252C_%253BKfOWM0AOKlHUnM%252Cx8Ys3p8LDit7OM%252C_%253Bt7sEjaXYwqLVTM%252CFwFurjiVr9Pv6M%252C_%253BIuEh3RwMkIGOsM%252CPTc0aom-Y5rieM%252C_%253B8r2LHI7KGevvgM%252Cg0LaWva-OmeUwM%252C_&usg=AI4_-kRio-en518pGAdXoMf8OXWXNC0JLw&sa=X&ved=2ahUKEwiGsd6dseD4AhXDJUQIHVsFCMkQ9QF6BAgIEAE#imgrc=EhvsOp3X2uu4HM

Page 9 of 26