Forum Replies Created

Page 39 of 83
  • Tim

    Member
    October 24, 2016 at 11:03 am in reply to: Reasonable amount of smoke

    We’ve found out of our 5 different prevosts over the years, those equipped with Yanmar motors(aka Koehler) smoke more than Kubota( Powertech). Our 1992 Beaver Prevost with a naturally aspirated 15 KW Powertch smoked less than our current 2000 Marathon with 20KW Koehler

  • Tim

    Member
    October 23, 2016 at 5:45 pm in reply to: NORMONT GAS SPRINGS

    the windows are electric. I’ve changed the solenoid but the next thing is to change the motor. The window unlocks but doesn’t “pop” open. So I’m hoping that perhaps the pneumatic spring is bad. I just can’t seem to find a replacement.

  • Tim

    Member
    October 18, 2016 at 10:46 pm in reply to: Upgrade

    Are we reserving spots already.

    Hey Jon and jTom, I spoke with Jeff yesterday about using Prevost spare wires to go from the engine compartment to the breaker panel above the steer compartment for Roadmaster to use and in the course of conversation I asked him ibecause of all the new upgrades to ETLC, WHAT IS THE NEW PRICE FOR OIL CHANGES going to be.

    He said he’s working on it !!!!!!!!!!!!!!!!!!! Really

  • Tim

    Member
    October 18, 2016 at 4:06 pm in reply to: Oil change

    Answer………..

    Billy Bob got his hands on it.

  • Tim

    Member
    October 17, 2016 at 9:55 am in reply to: Outlaw or Emerald coaches

    Outlaw seems to deliver a lot of bang for the buck. While I’m not the one to take Prevost coach buying info from, during my search, one of the few negatives I could find is the lack of closet space on some of the available models.

  • Tim

    Member
    October 16, 2016 at 8:16 am in reply to: Xantrex vs Magnum vs Other

    His CC is not setup to run an AC, so I think the question is whether to try to repair the 2500 or replace it. Like in my first post, with lack of certain parts, I would lean to a couple new Magnums and be done with it. I’m not suggesting it can’t be fixed, but even if repaired, it’s only a matter of time, I’ve been there with the 2500’s.

  • Tim

    Member
    October 15, 2016 at 10:49 pm in reply to: Xantrex vs Magnum vs Other

    Parts for the 2500 are getting few and far between, so you may have to look at replacements such as Magnum. You should talk to the experts at Inverter Services, a PC advertiser and get their take on your problem.

    Inverter Service

  • Tim

    Member
    October 15, 2016 at 6:38 am in reply to: Norgren Valve

    Mystery for me solved. I couldn’t figure out what the purpose was for the Norgren back there.

  • Tim

    Member
    October 14, 2016 at 8:52 pm in reply to: Norgren Valve

    Take out the 4 phillips screws on one of the end caps and the entire valve will come apart. Preferably the end cap with the actuator. If you can get the screwdriver at the screws it can be repaired while still bolted to the chassis.

  • Tim

    Member
    October 14, 2016 at 2:54 pm in reply to: Glass Dash or SilverLeaf

    Buddy…

    Just a thought, because I’ve found myself in the same situation you described (engine screaming because I had forgotten that I had manually selected the gearing – Karen says I can’t hear crap either)…I haven’t followed up on the idea, but maybe a smaller racing type tach mounted somewhere in the dash instrument scan area with a red light “shift indicator” would help, if it’s a large enough problem. I assume someplace like Summit Racing has tachs that you can set your own shift points…Don’t think it would be all that expensive – the largest headache is making sure it would be compatible with the DD and then the wiring & mounting.

    As I said, just a thought…

  • Tim

    Member
    October 14, 2016 at 9:31 am in reply to: Ruidosa Motorcoach Ranch RVPark

    Be sure to mention PC George, we hope they’re happy with their advertising.

  • Tim

    Member
    October 12, 2016 at 9:57 pm in reply to: What does “Well Maintained” mean?

    Andy…

    We had the same concerns about maintenance, etc. when we got our coach several years ago. A chance meeting with Peter at Prevost in Mira Loma early on in our coach ownership, and his recommendation of this site and Jeff at ETLC have made our coach experience most pleasurable. If you’ve not met Jeff yet, it is well worth your time and effort to get your coach to Vonore, and let him check it out. He has worked with us to set up a “zero out” schedule based on what the current components look like based on his experience, rather than simply doing it all at once. One of the relatively few things we have remaining is to replace our brake canisters, and that will be done this winter or next spring. Then we start over again. While we don’t have Peter’s need for our coach to be 1000% for business, we are full time in our coach, I do tend to display a little OCD behavior (I like it right), & we certainly want to avoid nasty roadside surprises if at all possible. The other thing that I would mention is to make it a priority to attend one of the weekend seminars that Jon, Tom, & Jeff put on. I can’t stress enough the dividends it has paid for us in terms of not only overall bus knowledge, but also the opportunity to meet and spend quality time with other bus owners. Next one is coming up next spring, I believe.

  • Tim

    Member
    October 12, 2016 at 5:50 pm in reply to: What does “Well Maintained” mean?

    Jon hit the nail on the head about things done , when I bought the coach from Liberty it was in top shape the delam was already done on bottom , so, some of the things where done because like Jon said I don’t need trouble when on road bottom line coach was in great shape when I bought it , it came with a Liberty warranty also I just wanted it like new somebody could have got along with it for years , but it’s the way I am I like things 1000%

    Andy you should have seen what I did to the coach I had before this one and it was in great shape also when I bought it, and the guy that bought it it from me has had no trouble, all he has to do is change fluids for years, it’s just the way I am

  • Tim

    Member
    October 10, 2016 at 6:28 am in reply to: Upgrade

    New

    ts are along

    New outlets are along the back edge like everyone parked for the training seminars…

  • Tim

    Member
    October 9, 2016 at 9:25 am in reply to: Annoying Alarm

    Jeff….

    Thanks so much… hope you can tell me more when you check so I can compare with Prevost Houston… and thank you for leaving Larry a message… he was on the phone the whole time with anyone that would listen so maybe it just didn’t make it through… but thank you so much.

    Cheers, Diane

Page 39 of 83