Forum Replies Created

Page 18 of 83
  • Tim

    Member
    August 21, 2017 at 9:37 pm in reply to: Engine Cleaner

    I’m impressed. Besides the bus, I’m going to try it on the engine, underside, and drivetrain of the race car.

  • Tim

    Member
    August 20, 2017 at 8:28 pm in reply to: Electrical system Upgrades


    looking on this from automotive stand point tech availability, $ 4500 should do it…

  • Tim

    Member
    August 16, 2017 at 9:02 am in reply to: New holding tank sensors

    The new Rasberry system replaces all tech-link systems and it’s what all new coaches come with (like the tank sensors).

    However, it is “not” plug & play. Leon said it simply wouldn’t fit in my current space (overhead in driver’s compartment). However, since mine is still working, he said stick with mine until it quits, then head the a Marathon facility to get the Rasberry. I think he quoted $1,400 to upgrade to the new Rasberry.

    Side note to Tom’s question to B-Tom,

    When we were at Marathon, we parked next to a guy who just got back from Alaska. He said it was an unbelievable experience, but would never do it in his bus again. He said there were segments with dirt, gravel, new tar, etc., and his coach needed new brakes, shocks when they returned. In fact, his coach blew a tire somewhere along the Canadian/US border and Marathon ended up sending a low-boy to pick up his bus and get it to the Marathon facility in Coburg. He was still trying to get the tar of his stainless steel when we were there …

    Does make me wonder about taking our bus up there …

  • Tim

    Member
    August 15, 2017 at 10:56 pm in reply to: New holding tank sensors

    Do the new sensors work with your vintage tech-link or did you have to upgrade to the new “rasberry tech link”?

    My sensors still work with no issues. They go up in increments of 10%, but I basically know where I’m at.

    A couple months ago, my Tech Link went “blank.” Marathon thought it was a bad video card which would have meant I had to upgrade to the rasberry tech link. I changed out on of the radio shack amplifier for the tech link itself, $40 on Amazon, and was back in business.

    But it is good to know there’s a replacment out there … didn’t like not knowing where my tank levels were at.

  • Tim

    Member
    August 15, 2017 at 9:23 pm in reply to: Fuel Credit Card Scam ___ I – 10 Corridor

    The card is the only way to go. Quick, safe and the receipt comes by email quickly.

  • Tim

    Member
    August 15, 2017 at 6:27 pm in reply to: Bay 1 electrical cabinet fan

    Just a warning, the camp ground fees double during eclipse week and we will have to suspend the continential breakfats and the lunch buffet due to the number of people here. The evening meals will be accross the highway at the Lakehouse Grill.

  • Tim

    Member
    August 15, 2017 at 9:30 am in reply to: Liberty switch panel lites

    I have one light that is out too. I would think the button/switch would get swapped out from the console rather than the diode/bulb getting replace. I haven’t seen where the individual bulb was sold separately. I even thought about changing it out with one of these console panels from the Knight Rider car. lol.

  • Tim

    Member
    August 11, 2017 at 6:32 pm in reply to: Need you guys to take a look at clip of an engine


    Hi Ron,

    I downloaded the video you sent me and I couldn’t upload it to the forum either. I thought a video could be uploaded but maybe I’m wrong about that? Maybe Jon or Tom will jump in and maybe you could post it as a link? Sorry I’m not more helpful.

    Harry

  • Tim

    Member
    August 11, 2017 at 6:24 pm in reply to: Water Pumps

    I’m not sure where you are getting this information but it gets weirder by the minute.

    If you house plumbing system vent that goes through the roof is connected in any way to the fresh water tank vent you literally have a direct connection between your waste holding tank and your fresh water tank.

    I don’t think so. Somebody is making this stuff up.

    Relating to the water pump, of course when you draw water the pressure drops and the water pump kicks on to restore pressure. Which pump does that is unimportant because that is how the system works and there has to be a check valve to prevent pressure from pushing water back into the water tank.

  • Tim

    Member
    August 11, 2017 at 3:26 pm in reply to: Microphor flapper seal

    Thanks Joe. A more methodical search turned up a spare seal we ordered last year. It’s different from the old seal but if all goes well… Meanwhile, Ann from Mullaney has responded with helpful advice and descriptions. Linda

  • Tim

    Member
    August 11, 2017 at 11:36 am in reply to: No power no boost!!! Help please!

    Thats good news. Glad to hear it was an easy fix !

    Bsafe,

    Rocky

  • Tim

    Member
    August 11, 2017 at 8:31 am in reply to: Myrtle Beach, S C

    Myrtle Beach Travel Park is a great place and is on the North End and close to everything. On the Ocean

  • Tim

    Member
    August 10, 2017 at 2:21 pm in reply to: Water Pumps

    THAT IS BOGUS, TIM

    As amateurs I am sure we get told stuff sometimes just so we go away and quit bothering the experts. But to say the 120 V pump needs to be off because of air build up in the water tank is BS.

    Let’s apply a little thought to that statement. Both pumps draw water from the bottom of the tank. Each has a check valve or some means of preventing pressurized water from flowing back into the water holding tank because if water were to drain back into the tank the pumps would be cycling all the time to maintain water system pressure.

    But there is a second reason water and air will not be an issue if they diid flow back into the tank. The tank is not a sealed vessel. If it was the first time water was drained from the tank by usage, and no air entered because it was sealed eventually the space previously occupied by water would be filled with the tank until if broke or cracked or otherwise failed. With atmospheric pressure at around 14 PSI you can imagine how quickly the tank would cave in from air pressure outside. That is why all tanks are vented and as water is drawn from the tank it is replaced with air. Conversely if by some unknown means a pump was able to introduce water to the tank it would escape through the vent which is usually the tank overflow.or if there was no vent it would not be long before the tank would explode.

    Keeping a 120V pump automatically turned off and using instead a low current draw 12 V pump makes sense in the context that if you are not hooked to shore power or have the generator running, you could be trying to cool the coach by running A/C units through the inverter. If the 120V pump kicks on, like the A/C units there is an intial high starting current draw and if that happened a lot it would trip breakers or overload inverters so a coach without OTR is likely to have current draw issues that make the addition of a heavy water pump load undesirable.

  • Tim

    Member
    August 9, 2017 at 9:19 pm in reply to: Aux Reset

    Like Bill said, when I plug into shore power the Aux reset light will start blinking. If I take a minute or so to walk into the bedroom to check that everything is ok, its usually already off and the AC1 line is green, if I turn on the breaker in the bay and walk straight in and check the aux reset light will be blinking, but only for about a minute. I sometimes will push it and other times not, and it has always gone off.

  • Tim

    Member
    August 9, 2017 at 6:52 pm in reply to: Water Pumps

    Interesting. I found our Grundfos 110v sick last week. When checking it appears to be locked up. Checked everything I know too but still doesn’t work. It’s at least 12 years old so decided to replace. Yes, it does cost more than an additional 12v pump but in the big scheme of things it’s less than most repair/replace costs for coach.

    Found a new one locally and will replace within a few weeks. The 12v still works and I carry a 12v replacement just in case. The ShurFlo doesn’t cost much and is easy to replace.

    I will take the old 110v apart and keep any pieces that may be used at a later date.

Page 18 of 83