Jon
Forum Replies Created
-
I doubt that mine is the Oldest coach but it is a 1986 Prevost XL converted by Royal. we have had the coach since 2014 and put about 30,000 miles on it. it is amazing to drive. I have replaced all the parts that move on the underside, New flooring inside. including replacing the engine and serviced the transmission 30,000 miles ago. it was painted last year and looks better than new. of course I have more invested in the bus than I will ever get out of it I just don’t care it is so nice to drive something that is safe and comfortable. you cant put a price on that. we just finished a 5500 mile trip around the southwest and had a wonderful time over 4 months.
I did own a 1962 GM 4106 number 763 that had been a grey hound before it was converted by a aircraft interior shop back in the early 1980s. I bought it in 2002 and put about 45,000 miles on it. before selling it to a fellow in Alaska.
Dennis Wisniewski Sequim WA
r
-
Interesting stuff guys, thanks.
What is the ballpark replacement cost of both an 8V92 and a series 60?
-
Hey John,
Thanks for getting back to me so soon. Just got off the phone with Prevost and going to check wiring on oil pressure sensor.
no visible oil anywhere and oil is normal level on the stick. Prevost guy suspects bad sensor which he said I can get fixed if I can find a Detroit service center. -
Check with American Fleet in Springfield, MO. They had one a few years back when they worked on my DDEC I but I don’t know if they still have it or finally threw it away. They did not need it as they have no setup to run or test a DDEC I.
-
Jon
MemberSeptember 19, 2021 at 8:54 am in reply to: 2000 Royale 17.5 Power Tech not producing powerPowerTech Generators, Jeff Jones – 352 267 0822 or 352-435-4416
I have a PowerTech operator & installation manual pdf file I could email you is I had your email? Click “lonestarace” and you can email me. Activate that feature for you by clicking “profile”.
-
On youtube Gil Johnson “Prevost Motorhome Help” channel. He did a good 15 min video.
-
Jon
MemberSeptember 17, 2021 at 10:08 pm in reply to: 2000 Royale 17.5 Power Tech not producing powerThe inverter has no direct relation to power from the generator output.
Read the voltage at the generator wiring to the breaker on generator control panel.
If no voltage then go to troubleshooting on PT site.
-
I purchased a 1998 unit from the estate of the original owner. I received maintenance records from the truck shop of his 600 plus trucking maintenance facility. The bus had 140,000 miles but was garaged for about 18 months due to illness.
The tires were 9 years and great tread, most RV units never wear out the tires prior to time recommended replacement.
The interior was in great shape but dated, wife wanted to replace carpet and valances.
I wanted to insure maintenance was up to date.
She got the interior rework including flooring and valances.
I got the bus into the truck shop that maintained our fleet of trucks and told them to change every fluid and inspect the brakes and new shocks all around.
I took the bus to Prevost for an alignment and they said replace the upper and lower A arms and a couple of other front end components that they described as age related deterioration of the bushings in the components.
I then replaced all brake relay units and air bags with compression fittings.
I replaced the hoses on all the brake and air bags,several of the control units.
My bus now sits level for over a month and the primary and secondary air hold with only a few lbs of drop a week.
I think u have to look for a bus that closely fits your needs and plan on putting some money in it to insure it is up to your quality. Each person has different levels of expectations and you need to treat the seller with respect and make a valued purchase with inspection by a qualified person to avoid surprises.
-
That filter with the sensor is made by Parker Co., they own Racor I think.
Should be able to take the filter # or the filter to a parts store and get one. I don’t think your Auto Zones and O’Rileys will have it.
A NAPA would probably be your best bet.
-
Yellow Jacket-
Great tips!
I’m getting the idea here. Use it or lose it.
Every one/thing benefits from regular exercise. I will make it a point to take the bus out for a roll at least once a month and use it.
Thanks!
-
I hear what you’re saying Paul. Problem is someone in the past took the Featherlite wiring book. Have no way of figuring out any of the Featherlite wire runs or Circuits.
Wires still appear to be tight in the plug, but would definitely like to change out the plug. Just have no idea where get it or even what to look for.
Chuck
-
Jon
MemberAugust 18, 2021 at 12:55 pm in reply to: CAN bus troubleshooting on a 2011 Emerald/OutlawThanks for the response. I’ll definitely continue to be in contact with Emerald.
-
Pretty dang easy to tell if they are 8D or 4D! I used to have 4 8D and now I have 8 4D.
I will take a look and see if I can find a sticker but they are tucked away pretty well.
-
You must fix the speed controller if you want to benefit from it. When mine failed it fails at one speed. Still blows but no variable speed. Which is why I solder in two fuses at motors to protect the board.
Ouch at $1,100 dollars. Find a good tech they be might be able to troubleshoot at less cost. This board does several things besides speed control for drivers air (small Ac System). I kept old board as someday I will figure it out with help of qualified tech. I have seen this board appear on ebay. Buyer beware.
The fan control knob is also an expensive Prevost part. It would be the first place I would look to see if it is bad. The Drivers AC evaportor was made by Carrier. I have the Carrier drawings. But carrier did not make the fan control rheostat or fan speed controller. Find that vendor and you may have well have discovered the lost Apache Gold.
On recent trip blowers stop working. Turnout the PAX side fuse blew that I wired in. Replaced it with new and system was back up and running. Tells me PAX side fan is master.
This controller could be fix if someone set up a breadboard test rig. I would first check the fuse on the board. Fuse looks like it is ceramic BUSE type fuse.
-
Very nice gesture. When I get my door fixed I’ll come and see ya.