Jon
Forum Replies Created
-
There are 4 on each side up high, and one on each compartment door down low.
Here is what i used:
-
Mike: what kind of LED light did you use for the docking replacement? I’m having trouble placing where it is on the coach.
-
What is the cost of centramatic balancers ?
-
Giboney the lights look great. What are you using for headlights?
Bill III
-
You can always just replace the tow bar plug with 9 pin. Both my 02 and 04 Marathon were 6 round.
-
Mine is doing the same thing on the driver’s side. It’s either the 5-port on the bulkhead ahead of the drive axle, the 3-port between the drive and tag near the tires, one of the 3 air bags on that side or an air line or fitting between them. Mine leaks down after a few hours but I couldn’t find anything with soapy water. I sprayed both valves, the air fittings, and the top/bottom of each bag. Some areas from underneath and some through the wheel wells. I have an ultrasonic leak detector coming today. Looks like I should replace one of the air bags as well, one looks rough and doesn’t match the other side. Obligatory disclaimer: support the coach at the proper locations before getting under it, especially if messing with the air system.
-
Jon
MemberSeptember 28, 2021 at 4:27 pm in reply to: Yanmar Diesel Service Marathon Generator Post 1Thank you for that update, Ed.
Glad all is back up and running. Everything is a learning experience. Definitely appreciate all the photos you posted!
Am I correct in understanding that valve lash was still proper despite never having been checked / adjusted in 4,000 hours of operation?
-
Dr. Gary…you’re continually asking a lot of “What if” questions. I would suggest you get that first coach and live in it for awhile. You’ll learn a lot and just maybe, you’ll realize that you can really enjoy a Prevost as designed and built by one of the professional converters…possibly with maybe just a few interior design and/or AV updates.
-
Jon
MemberSeptember 28, 2021 at 12:04 am in reply to: Yanmar Diesel Service Marathon Generator Post 1Agree – Very Good Post, Ed, and hope you have since made final progress.
How far off was the valve lash?
Please let us know what all you replaced, etc.
Also, any idea what caused the leaking freeze plugs?
-
That looks like something from one of your relay valves.
-
It works best if you remove the glass first, sorry for that but I couldn’t help my self.!!!
-
Bill:
Take a deep breath, everyone here, especially Jon & Tom are sharing advice to help. We all learn from our mistakes and others.
Please consider doing the DOT brake test before departure. Not doing so is like being a diabetic and not monitoring your insulin levels. You will get away with it until you don’t.
Chuck
-
Good grief, I ask Bill a question and now I understand I’m one of two who prevent some people from posting due to the chance of being embarrassed, so they contact Bill instead.
Had to pinch myself, thought I was on a Facebook site.
-
I’m not disputing what the mechanic determined was the issue, but I admit to being totally confused.
If the bus has the parking brake applied there is no air pressure to any brake, service or parking. If pressure will not build under that condition the leak is at or ahead of the relay valve serving the parking brake..
If releasing the parking brake results in an air leak that typically is a sign the issue is with the combo brake chambers as used in the rear axles or the associated air lines. If the leak appears when using the service brakes then it could be associated with any brake chamber or service brake hoses.
It is important owners know and understand this because the diagnosis can be made if during the pre-trip inspection a DOT brake check is performed.
-
Mike , I’m thinking battery also . Remove the 3 bolts that cover the battery s and take a peek . I think if you hear it inside the bus it must have been pretty loud . Be sure to wear glasses . Hope it is something simple .