Forum Replies Created

Page 11 of 48
  • Jon

    Member
    May 20, 2023 at 9:41 pm in reply to: – All 3 Air Tanks Leaking Down Same Rate RESOLVED

    Good Info Mikee & Chuck – thank you very much.

    Will enjoy until the next leak appears!

  • Jon

    Member
    May 17, 2023 at 2:49 pm in reply to: Tire installer in Dallas / Ft Worth?

    Who gets the take-offs?

  • Jon

    Member
    May 15, 2023 at 8:18 pm in reply to: In a new coach, would you…

    Lots of good input. I don’t want to pepper the forum with a bunch of new threads, but maybe I’ll go with new topics since the Homebuilder section is mostly quiet. You know, until you guys cry uncle!

    I bought one of those four-camera bird’s eye view systems off of Amazon right before I committed to gutting the interior. It’s still in the box, but that’s my plan. I’m designing easy access to wire chases along the outer edges of the ceiling, so upgrades are an option for the cameras if that system is junk.

    I will retain the engine access in the bedroom. My plan is to have the bed base be easily removable so you can lean the mattress and the base against one wall and lay down to work through that hatch. The Liberty bed base was very stout, but working through the engine hatch was difficult.

    I happen to have a pallet of new 24″x24″x24″ cardboard boxes in my shop, so I’m assembling those to build modular walls and cabinets for layout. There are a few key dimensions that will determine my final layout, mainly the aisle width and walking space at the foot of the bed. The kitchen/bathroom transition is somewhat constrained by the existing plumbing penetrations, which I plan to re-use, so my biggest trade off is between the bedroom and bathroom size.

    I’m planning a center aisle, because I really disliked the side aisle. It looks like 26″ should work fine if I use pocket doors, or 28″ if any door swings into the aisle. My side aisle was only 22″. Combined with the OTR duct along the floor, that just felt really cramped. 26″ seems spacious by comparison.

    I have my engineered hardwoods picked out. Ernie Ekberg’s message group was very helpful in making a flooring plan. Coincidentally, he recently announced on that group that he was retiring from the installation business. I learned a great deal from his posts.

    As for my intended usage, I’m trying to keep it flexible. My main goal is to address my frustrations with the old layout. Bedroom size, shower size, hallway layout and size are the main ones. I won’t install an oven, but I do want a large refrigerator/freezer. There don’t seem to be any 30″ counter-depth models, and 36″ is probably too big. That’ll likely push me to a 15 cubic foot or so model, which should be fine. I’ll probably go with a built-in microwave, and then a cabinet shelf for a large convection oven / air fryer. I don’t know if I’ll use a built-in induction cooktop or a countertop model, but induction seems like the way to go.

    I’m trying to keep the bathroom on one side of the center aisle so that the opposite space can be used for either bunk beds or pantry and hanging closet space. I won’t build the bunks, but I’ll try to size it so they’re an option in the future. The center aisle will actually end up being off-center, which also works for having a little more wall space at the foot of the bed for a decent TV.

  • Jon

    Member
    May 10, 2023 at 12:34 pm in reply to: In a new coach, would you…

    In a new coach, would you include a security system?

    I removed the old system, but have complete access for running new wires and installing new contacts and devices. Do you use your system? If you had a blank slate, what aftermarket system would you install?

  • Jon

    Member
    May 8, 2023 at 7:13 pm in reply to: Water Heater Leak?

    I’m currently dealing with the same thing at the moment with pressure relief valve leaking. Haven’t moved in months, so it’s not an engine overheat issue.

    From the looks of your picture, I can clearly see a “Drip” next to the fresh water tank red shut off valve. Is this where it’s leaking?

    I don’t have a hose on the pressure relief valve like you do, so mine is leaking all over the bay at the moment. You’d know if it was leaking from that valve as the ground would be wet from where it goes through the floor.

  • Jon

    Member
    May 8, 2023 at 7:47 am in reply to: Changing hoses & dirty Radiator internals

    Great work, and thanks for sharing along the way! It really helps us all learn.

    Can I get the number for your mouse inspector?

  • Jon

    Member
    April 27, 2023 at 1:00 pm in reply to: House batteries 97 liberty xl – need guidence

    I agree with Don’s solution…

  • Jon

    Member
    April 27, 2023 at 10:36 am in reply to: Cruiseair review – one not working
  • Jon

    Member
    April 25, 2023 at 8:00 pm in reply to: Opinions on Progressive Insurance

    Jon, et al.,

    I spent the second year of Law School clerking for an Attorney that specialized in plaintiff lawsuits against insurance companies. That is why hold insurers, bankers, and a few others in not so high esteem. I learned a lot about getting insurers to pay, and when they fought with us, they paid even more. Great work.

    I am not unhappy with National General. However, each year, or two, I go through a process of seeing what is available for the Prevost insurance. It is not cost driven as much as it is to see what has changed. I have lived in South Carolina since April, 2005, and I am familiar with South Carolina Insurance requirements. Going through a broker introduces a few challenges.

    As you stated, the insurer needs to understand that this is not a typical RV. I have taken great lengths of conversation to make sure they understand what they are insuring. My beauty may be old, but she is still complex and expensive to make right when something goes wrong. Just one thing I kept beating hevily upon was towing. The response, repeatedly iterated by the insurer, is that Class A towing is covered if you stay within the network they recommend. I kept replying that a Prevost is not a typical RV. I sent multiple pictures. I sent detail on the complex mechanical, electrical, and other systems. What did I get? The same response.

    I have no claims with National General and I doubt I will change. The $ are not the driver here. It is peace of mind for Tammie and I while we enjoying this beautiful ole gal. She is old. She is sweet. she deserves to be pampered and that is what I intend to do for her.

    Safe traveling everyone.

    Ron

  • Jon

    Member
    April 25, 2023 at 8:44 am in reply to: Changing hoses & dirty Radiator internals

    Mouse inspector.

    Priceless picture

  • Jon

    Member
    April 23, 2023 at 9:32 am in reply to: On road issue

    I have knorr bremske sb 6000/7000 series. Book says they are self adjusting. No mention about dragging with self adjusters.

  • Jon

    Member
    April 23, 2023 at 9:30 am in reply to: Opinions on Progressive Insurance

    Thanks to everyone that has provided input. I currently have a policy on the Prevost with National General Insurance. No claims.

    I have been thinking about moving to a newer Prevost, 1999-2000. Nationwide will no longer insure a Prevost. They said they are keeping Legacy policy holders, but they will not insure another one if I were to buy one.

    I am not sure what I will do. I intend to keep following this thread for a while to see what additional comment is provided. There is just too much ownership history on this forum to ignore the imput.

    Guten reisen, good travel, to all.

    Ron

  • Jon

    Member
    March 29, 2023 at 9:08 pm in reply to: Selling 5 year old 365 tires?

    I’ve got them listed on craigslist

    I’ve heard some fleets will buy them wear them out and retread for another go round. Just need to find the right person.

    Will see what happens.

  • Jon

    Member
    February 26, 2023 at 11:49 pm in reply to: What did you do to your bus today Part 2

    Keep up the good work! It is well worth your effort.

  • Jon

    Member
    February 19, 2023 at 2:57 pm in reply to: Silver 92 not firing?

    Once it spins, and is known to be able to push fuel, if it will not start it is related to the electrons. The low hanging fruit is a list of easily checked things like the rear front-off-rear switch, the run relay, and power to and from the ECM CBs, #19,20, 21. If the ECM has power, everything else checks OK, it is probably the ECM.

    Get a reader on it. The DDEC opens the injectors so if fuel is flowing it will just make a loop to the return line.

Page 11 of 48