Forum Replies Created

Page 60 of 214
  • Dick

    Member
    December 18, 2019 at 12:22 pm in reply to: PLM LOCATION MARATHON 40

    Tom,

    Thanks for the reply. Marathon/ Coberg (Dave Bass and Jeff) could not find our wiring diagrams in the file, and the electrical location guide in our owner’s manual showed PLMs under the bumper, but maybe that is just generic placement. Joe at Marathon, FL. thought it would be curbside rear. After removing several ceiling lights and closet panels to trace everything, he was correct. I wouldn’t call this a PLM, but a distribution buss? See picture. None the less, it was a 2 amp fuse as I had expected.

    FYI on roof air units for the older coaches. Our old 4 button thermostats had a/c unit circuit boards that incorporated taps for remote temp sensor and load shed. I was sent single zone 15K units with built-in circuit boards (Dometic 651916) that are not really compatible. I will need to change the control boards.

    Dometic 651816 is the 15K heat pump that has factory installed control board that will hook up to all the factory telephone cables for the T-stat and also has the control panel connections for remote internal/ external temp sensors, plus spades for the load shed.

    Thanks for the assist!

    Best Regards,

    Stephen

  • Dick

    Member
    December 18, 2019 at 11:14 am in reply to: A Trend

    Our coaches are private vehicles. It’s commercial use is where the issue is. Having said that, one of our Colorado house state legislatures is trying to bar vintage vehicles, claiming air quality issues.

  • Dick

    Member
    December 18, 2019 at 7:14 am in reply to: Jake Brake questions

    Is it possible to have two programs for jake downshifting? Could the mode button be used to select the second profile? I am currently preselected to fourth gear and I like it that way. I do have to watch the fourth downshift as it will go straight to 2350 RPM and that makes me uncomfortable. I manage by watching the tach and turning off the jake at 1800 RPM and then bleeding speed, reengaging, and then manually downshifting as needed. I rarely touch the service brakes before the 15 MPH cutout using this technique. I am asking about the dual mode option as my wife also drives. I would like the added safety of knowing in a panic stop she has all the retarding force she can get.

  • Dick

    Member
    December 17, 2019 at 9:50 pm in reply to: Jake Brake questions

    Thanks Jim. Just saw your latest post.

  • Dick

    Member
    December 17, 2019 at 11:33 am in reply to: Jake Brake questions

    The downshift should not put the engine in an RPM over the stated max RPM of 2100, but if the grade is steep and the coach is accelerating when the Allison gears down it could push the RPMs. That is why with the Jake or retarder I manage the coach energy using whatever is appropriate to maintain target speeds, control temps if required and prevent over revving.

    I am ALWAYS in my target gear and at my target speed before the downhill portion so I am not relying on the coach systems to do my job. On modest grades I just let the retarder handle the downshift and I manage the retarding strength with the stick. I usually leave the stick in the zero position, retarder on, so I have immediate retarding force in the event of needed braking, but on the downhills I control speed, usually by selecting the 2nd or third position with the retarder stick.

  • Dick

    Member
    December 15, 2019 at 4:52 pm in reply to: Leak identification.

    I’m using the Bacharach truPoint ultra. It’s not cheap but it works well. I’ve also used the amprobe uld300 which is very good. It’s just been recently upgraded to the uld420. But they make leak detection so much easier. That hiss is unmistakeable for the probe to pick up.

    that being said – it will take a lot closer inspection for slower leaks. It needs an actual ultrasound leak to detect. If it’s a tiny slow leak over days not sure how it does.

  • Dick

    Member
    December 12, 2019 at 7:58 pm in reply to: AquaChek ACK10 Compressed Air Water Removal Kit

    Seem like over engineering to me. More maintenance and parts to replace.

  • Dick

    Member
    December 12, 2019 at 8:10 am in reply to: Full timing

    Bill:

    Just out of curiosity. What does Texas inspection involve?

    Chuck

  • Dick

    Member
    December 12, 2019 at 8:02 am in reply to: AquaChek ACK10 Compressed Air Water Removal Kit

    Jon, love the quote. Going to use it in the future

    “So the selling point is to put a belt on with suspenders.”

    Chuck

  • Dick

    Member
    December 11, 2019 at 11:37 am in reply to: Windshield

    Prevostnoob,

    We are trying to help you, sir but, without some basic info were just doing guess work with your question.

    Between 3 posters above (AL, Jon, Tom) we have owned 13 Prevost buses.

    Please enter basic info on the bus you own and considering a major body change.

    We’re glad to help ….. remember if we don’t know the answer we usually make things up to bluff our way though. smile

    Many body changes have been done over the years by PC members. I’am amazed at the talent we read about on this site.

    AL

  • Dick

    Member
    December 9, 2019 at 8:03 am in reply to: Diesel Particulate Filter artical

    If I were King, every delivery vehicle that returns home to the terminal at night (US Postal trucks, UPS,FedEx, Prime Delivery, grocery delivery, etc. would be converted to CNG. They could be refilled every night, be ready in the morning for work and reduce air pollution considerably reducing the need to have the D60’s in the Prevost to have all the pollution crap for the travel that is taken in private coaches. If the Greenies reallly want to have an impact on improving air quality, forget the battery hox with Tesla’s and encourage more CNG, we are the Saudi Arabia of natural gas. Look at the NOX data and CNG really is the perfect fuel for 75% of all travel vehicles MB Opps too much coffee this morning.

  • Dick

    Member
    December 8, 2019 at 9:59 am in reply to: Black / gray water tank cleaning

    Well said Jon, very well said.

    I coveted a Liberty Coach for decades and bought one without even knowing about the rose petal feature. What a wonderful surprise that was.

    I’m convinced there are two kinds of Prevost owners … who have a Liberty Coach and those who (often secretly) passionately wish they had a Liberty.

    Some say “Join us, the water is fine” … Liberty Coach owners say “come smell the roses”.

  • Dick

    Member
    December 8, 2019 at 8:39 am in reply to: Black / gray water tank cleaning

    My coach has 3″ screw plugs in side at top of both black and grey tanks. I always unscrew and blast inside tanks to make sure all is clean. Thought all would have that feature for clean out. I Use a healthy squirt of dawn soap and a small bottle liquid Aqua Kem after clean out every trip.

  • Dick

    Member
    December 5, 2019 at 1:34 pm in reply to: Accumulator or diaphragm tank Pre-Charge (psi)

    Stop looking. You may have one for your reverse osmosis system but my coach came originally with a headhunter jetpaq (?) model water pump which has a built-in accumulator tank. I had to add a tank to my coach when I installed the mach 5.

  • Dick

    Member
    December 4, 2019 at 10:13 pm in reply to: Series 60 Engine ignition off at highway speed

    Detroit Diesel shop in Ocala found the problem?

Page 60 of 214