Forum Replies Created

Page 58 of 214
  • Dick

    Member
    January 10, 2020 at 11:46 am in reply to: Beaver Coach

    Hello,

    I now have a 1998 Featherlight conversion, but my first Prevost was a 1991 Beaver conversion. Very nice woodwork.

  • Dick

    Member
    January 9, 2020 at 10:08 pm in reply to: Anyone updated Dometic thermostats?

    Does anyone know if the Dometic “Control Touch” series is compatible?

  • Dick

    Member
    January 9, 2020 at 8:04 am in reply to: Mid 90’s 40’XL wanted

    Loocho, very wise choice especially because you know what your coach needs.

    I think with a little effort on your laptop you can find west coach 2 stroke engine and Allison 5 speed experts.

    I don’t know your skills or budget, but if you want to create a new coach I would have your non-computer engine rebuilt, replace accessories while it is out (alternator, air compressor, power steering pump, starter etc),rebuild the Allison and then redo the chassis.

    The chassis will need air bags, brake chambers, Norgren valves (or what Prevost was using in their place), ride height valves, plus check wheel bearings, brake drums and shoes, and make sure you have no hub seal leaks.

    Given the age I would check rubber hoses on the brake system, replace all coolant hoses, etc. You will end up with a new mid 80’s Prevost that should be mechanically reliable for a long time.

    You did not mention the house systems, but things that would screw up a trip are A/Cs, the refrigerator, the house electrical system which could be converters or inverters depending on the coach history.

    If you can do a lot of the work, or find someone able to do it for a reasonable price you will have a very reliable coach for less money than it would cost to move to a 10 year newer Series 60 coach that might need much of the same work.

  • Dick

    Member
    January 8, 2020 at 7:05 pm in reply to: Mid 90’s 40’XL wanted

    Nice looking coach. Timeless.

    As far as 8V92/Allison guru, find out who American Fleet rebuilds for in your area. I recall reading of an Allison rebuild shop, but can’t remember the name. American Fleet might know of one.

  • Dick

    Member
    January 8, 2020 at 6:32 pm in reply to: Where to go?

    Come on BA, this thread is already confusing enough.

    He’s got an H, the CAC is stacked. Different than the XL.

    Don’t you have a picture of your H ?

    Later

    bv

  • Dick

    Member
    January 8, 2020 at 10:15 am in reply to: Dash Air blowing HOT air!

    Not sure where your valve is, but you may be on the right track. My 1989 had the valve mounted on the ceiling of the bumper compartment also and required power to close; default position was open. Mine had an in-line fuse in a plastic holder which broke.

  • Dick

    Member
    January 6, 2020 at 5:28 pm in reply to: Mid 90’s 40’XL wanted

    Don’t be afraid of the 8V92. Keep the cooling system well maintained and service the engine and its fluids often, take it to people that are qualified to work on the engine, and it is a 400,000 to 500,000 mile engine.

    Yes it drinks fuel. Yes it uses (or drips) oil, But that 2 cycle technology powered a lot of heavy trucks and buses over the years. You can work on it while it is still in the coach. It is a simple engine and its weak point is it doesn’t tolerate overheating. If yours had DDEC I that might be an issue, but if you are concerned buy a spare ECM or update to DDEC III.

    But, a Series 60 is a vast improvement. Where an 8V92 might get 5 to 6 MPG depending on multiple factors, it is not unreasonable to expect 8 MPG from the 12.7 L engine. With care a Series 60 is easily going to get 800,000 to 1,000,000 miles.

    But when you are thinking in terms of miles at that level you will only stay reliable by a very proactive maintenance program usually replacing parts and systems before they fail. You do not say your annual mileage, but most leasing companies probably are selling their coaches long before they pass 1,000,000 miles. As mileage goes up it is a given if a part moves it is wearing out. That means brakes, bearings, gears, pumps, alternators, starters, and age plays a role with respect to parts that rely on rubber, or rust and corrosion.

    The reality in today’s world is no matter what drivetrain servicing our coaches is an ongoing battle due to the complexity of the systems and what we are asking of them. We alone have to have certain companies on speed dial to help with on the road problems. We have to have plans for when stuff fails. We are our worst enemy if we defer maintenance and repairs because it snowballs if we are not careful.

    If I were to be in your shoes I would not let garage space determine my coach. I would get a Series 60 45 foot coach with solid front axle. I would get the simplest coach such as a Liberty Classic or a Royale. Both do not have computers, PLCs or any complex features. The rivet chassis is well sorted out and robust. Glass is cheap and easy to replace. A 45 foot chassis has a load of storage space which has to be important to musicians.

    I would pick the 45 because until you have one you cannot believe how that additional 5 feet makes the coach so much more comfortable and easy to live in. A pre-emissions coach with a Series 60 is economical, and the lack of electronics simplifies service and eases diagnosis of problems.

  • Dick

    Member
    January 6, 2020 at 2:40 pm in reply to: Mid 90’s 40’XL wanted

    No matter how nice an older 40 foot XL conversion is, if it has an 8V92 the market places little value on it.That is sad, but a fact of life.

    When the switch was made to the Series 60 it was only possible because the World Transmission (the 6 speed) was shorter than the 5 speed, and that compensated for the longer length of the Series 60.

    But in addition to the need to have the S-60 paired to the 6 speed transmission there was a major change to the tag axle configuration to accept the S-60.

    The point is an engine swap can be done, but by the time the costs are added up the investment will approach the value of the coach as it sits today and that investment will not increase the value of the coach a penny unless you happen to hit the right buyer when you choose to sell.

    So getting back to my question………..why not a 45 footer? I can tell you that no matter how nice an older conversion may be, later model conversions typically had better systems and more features, and the difference in comfort and convenience between a 40 and 45 is night and day.

    The flip side is what is wrong with doing a major rebuild of the 8V92, and possibly the transmission and assuming the coach has been maintained you end up with a 40 foot coach you like for far less money and almost zero loss of reliability.

  • Dick

    Member
    January 6, 2020 at 2:39 pm in reply to: Mid 90’s 40’XL wanted

    I’m like Jon today, curious as to why your search is focused on a 40′ coach. We started our Prevost search looking for a 40′ coach because our driveway is narrow and (thought to be) difficult to back a coach down with our 24/26 foot race trailer and with the trailer on the coach difficult to manuveur where ever we go.

    We discovered that the additional 5′ on a motorhome chassis is NOT added to the wheelbase, only about two feet of it. Three feet of the five is behind the tag axle which gives you a nice tag axle bay!

    We are very happy with our 45′ Prevost and goes just about anywhere we want to get into. The only place it hasn’t is the campground that says its 42′ site absoluately maxes out at 42′ … which after visiting and ending up in overflow parking … I agree 100%. 42 there is 42 … no room for 45 (or 44 or 43 or 42-6). After a little practice, I can back the coach and 26′ trailer with a 5′ tongue easily, often without having to reposition the coach and trailer by moving forward.

    I would recommend making contact with American Fleet in Springfield, MO. They specialize in maintenance, modifications, and rebuilding of Detroit Diesel engines … the V-series (like your 8V92) as well as the 60 Series in the newer coaches. They should be able to put you on a maintenance program as well as be able to provide you with emergency 8V92 mechanics around the country.

    The last thing I would ever do is try an engine swap unless I had it done by someone who has done a bunch of times. I’ve read it discussed on other venues and have yet to read about anyone who has done one. The Series 60 is a longer, inline motor than your shorter 8V92 to start with.

    Good luck with your search!

  • Dick

    Member
    January 6, 2020 at 7:37 am in reply to: Trailer Village RV Park Grand Canyon

    If you mean the one at the Grand Canyon, you might want to read over these reviews. It sounds like a challenge for a large RV and an RV with limited leveling capabilities.

    https://www.rvparky.com/location/grand-canyon-trailer-village-south-rim

  • Dick

    Member
    January 2, 2020 at 8:14 am in reply to: Prevost Converters

    XLV was the identifier for the XL rivet coach, 45 feet long.

    XLII was the non-rivet X series coach.

    I don’t know if Prevost considered them official names but Prevost owners use those identifiers to describe their coaches almost universally.

  • Dick

    Member
    January 1, 2020 at 11:12 am in reply to: Happy New Year !!

    Happy New year Diane and all from sunny and warm Indio!

  • Dick

    Member
    December 31, 2019 at 12:06 pm in reply to: Relion Lithium Battery

    It is important to keep in mind that there are six different battery chemistries all called “lithium” or “lithium ion” and they vary greatly in all aspects of safety and performance, and they all require different management strategies to be safely deployed. They come in two basic configurations – prismatic cells and cylindrical cells.

    Prismatic cells are usually flat and designed with all the ampacity built into each cell, and 3.4 to 3.7 volts per cell. So, a nominal 12vdc battery will be made up of four cells. Loose one and you are left with a nominal 9vdc battery. they are used where the ability to mold the flat cells into intricate shapes to fit the geometry of the application is key. Think cell phones.

    cylindical cells are generally 16 to 25mm in diameter and 65 to 85mm in length. The voltage is 3.4 to 3.7vdc and amps depend on physical size and specific chemistry. The designer assembles them to create the ampacity and voltage required for the application. Any one of the six different Li battery chemistries can be packaged in either prismatic or cylindrical shapes.

    The original Tesla model S for example used over 7000 cylindrical cells of a chemical type where cobalt was mixed with lithium and other ingredients to result in very high capacity (about six times the energy density of lead acid) but which required very sophisticated heating, cooling and microprocessor management to make them safe for that application. The cells used now are still cylindrical but now are a bit larger, use less cobalt, and are now the same across all Tesla models.

    For replacing lead acid batteries, the best and safest bet is lithium iron phosphate chemistry which has no cobalt content. These are called “drop in replacement” batteries meaning they do not require extreme measures to keep them within the required temperatures, they already have the electronic management built in and can be recharged from most alternators.

    Older converter/charges generally will offer too low a voltage profile to fully recharge LiFePO4 batteries. They generally bulk charge at around 13.8 volts and float at a bit less. LiFePO4 batteries need 14.2 to 14.6 volts for bulk charge and 13.8 or so for float. Modern converter/chargers or inverter/chargers allow the user to set the charge profile so do work properly to fully charge Li batteries.

    Unless you really know what you are doing and like to tinker, avoid trying to repurpose lithium batteries designed for a different application into batteries suitable for use as replacement house batteries for your prevost conversion. At best those will have questionable life and at worst can be very hazardous for your health. Ignore all the internet blog posts you see about repurposing Tesla or Leaf batteries, especially. That is not for the inexperienced or the faint of heart!

  • Dick

    Member
    December 29, 2019 at 6:22 pm in reply to: Windshield washer pump

    Good post Chuck. I have never seen addressed before.

  • Dick

    Member
    December 26, 2019 at 11:56 am in reply to: Delamantion

    Because it has rivets, or have you seen it?

Page 58 of 214