Forum Replies Created

Page 56 of 214
  • Dick

    Member
    January 28, 2020 at 10:32 pm in reply to: RV Self Park!

    We’ve stopped at a campground in Fort Stockton, TX two years in a row. Kinda in middle of nowhere. When we ask for “just one night” the guy says “in late afternoon and out early”. I say yes. They have four or five FHU pull through spots along the road to their main entrance. We leave in the morning and don’t disrupt anyone. Just pull out onto the road.

    Similar concept on a smaller scale.

  • Dick

    Member
    January 28, 2020 at 6:40 pm in reply to: RV Self Park!

    If only “RV Parking” was an option everywhere! Wouldn’t that be great??!! We travel Coast to Coast and just need parking and electric. We arrive around 5pm and we are going to be out by 8am or 9am without even have left our coach!

    Sure, we sometimes look for destination parks like Stone Mountain but most of our travels are business related and just need a quick convenient over night. Even standard RV parks should consider adding the overnight option to their menu. It would be easy enough to do with locked door which require codes to access. If I don’t need laundry, shower, pool, I don’t get the code and pay way less.

  • Dick

    Member
    January 28, 2020 at 11:14 am in reply to: Lincoln MKX as a tow car

    Thanks, just the kind of feedback I am looking for.

  • Dick

    Member
    January 28, 2020 at 10:15 am in reply to: Lincoln MKX as a tow car

    Jerry

    i believe Mr Mark tows one maybe he can jump in here, or correct me.

  • Dick

    Member
    January 28, 2020 at 8:48 am in reply to: Lincoln MKX as a tow car

    Jerry:

    FMCA list a vehicle tow chart yearly. Go to their web site.

  • Dick

    Member
    January 26, 2020 at 10:55 am in reply to: Unexpected trip to ETLC

    I replaced our Whirlpool refer last year and the old one still worked but door hinges were bad so we replaced it with the same Whirlpool model and it’s funny you said about Samsung the people at Lowes said they try to avoid Samsung because they have had so many problems with Samsung products and tough to deal with.

  • Dick

    Member
    January 25, 2020 at 9:40 am in reply to: PDI needed in Arizona

    We had a similar positive experience purchasing from Chad and crew four years ago. At that time both sales and service were located at the Chandler, AZ, facility. Since then Bennett moved out to his own sales location elsewhere in the Phoenix area, Chad acquired a separate service facility where his techs did house work and an adjacent tour bus maintenance co did all the chassis work, and now I understand all service is provided by Silverleaf, a company that now employs some or all of the former Premium service techs in the same service facility and now does their own chassis and house service work. I don’t know how the ownership worked out.

    the techs we worked with then were very good and sought to make sure we were pleased with the bus and with the transaction – which we were and still are. The lead tech gave me his cell phone number and was Johnny on the spot answering my questions after the sale. I have not spoken to him in quite a while but I understand he made the transition to Silverleaf. I would use them if in need of service or PDI in the Phoenix area.

    like all vehicle purchase transactions, make sure you have your expectations and understandings in writing before you sign anything and you likely will have a good purchase experience.

    jerry

  • Dick

    Member
    January 24, 2020 at 6:05 pm in reply to: PDI needed in Arizona

    Hi Thomas,

    I thought about getting someone to inspect the coach, but the added expenses wasn’t worth it to me, so I did my own PDI. I went through everything myself. I started in the front and worked my way to the back and noted anything that was not working. I did have some exposure regarding the chassis, since I am not mechanical, but I looked for any fluid leaks on the ground, check the fluid levels, made sure the level low system performed.

    Premium then did all the repairs. When I flew back to take delivery, before I handed over the check, I made sure everything was fixed. We have put around 2k miles since we got her and knock on wood all is well.

  • Dick

    Member
    January 24, 2020 at 4:10 pm in reply to: Belt tensioner Cylinders

    Long shot for parts … Nationwide Traveler in Appleton, WI. Longtime seated coach operator that does their own maintenance. Tom Marks is partner who handles maintenance and Brian is the mechanic. (920) 734-5620

  • Dick

    Member
    January 24, 2020 at 3:36 pm in reply to: Question of the week

    He learned to do that while working in Green Bay.

  • Dick

    Member
    January 24, 2020 at 1:05 pm in reply to: Shower Drain access?

    Charles, I am incredibly lazy so any time I am affected by a problem I look for the easiest solution first.

    Like any drain the shower needs a trap so I would start by taking off the little perforated drain cover, pushing all the water out and then cleaning it as good as possible at least to the extent of my ability to see in it to make sure there are no obvious cracks or separations. I would make sure the entry from the tile to the drain is sealed. I have one of those cheap TV cameras with a flexible line and to the extent possible I would try to use that to see what I cannot see from above.

    If I came up with no obvious answers I would next go at it from the hard way. I would pull the water tank and with something I could use to control the depth of cut such as maybe a die grinder or circular saw with the blade depth controlled I would cut a small section of floor out to see if I could see from the outside of the drain line the problem.Last resort would be to break up the tile, try to remove the pan and start from the beginning. That would get into a big project.

  • Dick

    Member
    January 24, 2020 at 1:03 pm in reply to: Belt tensioner Cylinders

    Two years ago, Prevost had everything except one of the seals. My hydraulic shop had that one in stock.

  • Dick

    Member
    January 24, 2020 at 9:23 am in reply to: Belt tensioner Cylinders

    Thanks Jon. Maybe somebody will post a pic of device.

  • Dick

    Member
    January 23, 2020 at 8:48 am in reply to: Headlight lens replacement

    Thanks I’ll try

  • Dick

    Member
    January 21, 2020 at 5:08 pm in reply to: 2000 Prevost – 3M Front Shield Removal

    Thanks Andy, was looking at Xpel but not aware of the need of ceramic coating on top of it.

    AvalonKing seems to be a good ceramic coating? Looking at the 7 – 8 years film removal, ceramic coating investment should be minimal?

Page 56 of 214