Prevost Community Forums

Find answers, ask questions, and connect with our
Prevost Community around the world.

  • 2000 Prevost – 3M Front Shield Removal

    Posted by Dorel on January 15, 2020 at 5:17 pm

    Front shield got a little messy last couple years, decided to remove it.

    Pictures before and after…

    Great job by the best outhere, Wayne of Uglyshield – Fort Myers, Florida.

    Need suggestions/past practice for front coach protection mainly against chips…

    – install XPel Ultimate film or

    – ceramic coating

    I am leaning towards Xpel…costly but if on 6-7years replacement plan might be worth it.

    Dick replied 6 years, 7 months ago 9 Members · 11 Replies
  • 11 Replies
  • Larry

    Member
    January 15, 2020 at 5:34 pm

    Job well done by Wayne, highly recommended…

  • Archived

    Member
    January 15, 2020 at 6:29 pm

    Wow, new bus Dorel…

  • Dick

    Member
    January 16, 2020 at 8:38 am

    Dorel:

    What was the $ ?

  • Bill

    Member
    January 16, 2020 at 4:22 pm

    Thanks Tom, yes indeed looks factory new…love it….

    Chuck,

    I negotiated my price in 2018 for $850.

    Per Wayne, price went up $100 in 2019, but he honored the quoted 2018 price.

    Wayne’s contact information:

    https://uglyshieldremoval.com/

    Ugly Shield Removal

    1660 North Tamiami Trail

    North Fort Myers, Florida

    33903

    Phone: 239-240-0793

  • Larry

    Member
    January 16, 2020 at 5:44 pm

    Unbelievable …..really made a difference

    AL

  • Dick

    Member
    January 16, 2020 at 6:28 pm

    Dorel,

    He needs to advertise with us, lots of folk looking for the front end solution.

  • Art

    Member
    January 16, 2020 at 6:36 pm

    Dorel:

    Have H3 Same model year as yours, recently got a quote from ugly shield $1,100. No question he does a good job, just trying to justify the $1,100 after spending lots of $$$$ to get my coach mechanically up to par, plus have to commit $$$$ for wife to do her interior items

    Chuck

  • Jeff

    Member
    January 17, 2020 at 1:45 pm

    Thanks Al, it really looks great now.

    Tom, I mentioned that to him while he was working on the coach, said he will consider it. Quality is his primary focus, will take some time hire and properly train personnel on the removal. He suggested in 2018 he completed about 385 removals, of course with his father / son assistance. It is a very tedious job…took them from 9am until 5:30pm, with 15 min lunch to complete. I have a message into him, his decision what he wants to do going forward.

    Chuck, I understand, yes it is costly…ourselves were putting this off since 2017, tried couple ways to clean it myself without success, so I did the research and decided to let the professionals do it. Just FYI, Marathon is quoting about $2,500 to remove the shield and install the new Xpel Ultimate, coach at their facility for 3 days, no warranties if paint comes off during the shield removal…

    I am not sure how Wayne quoted your service, on ours he was just next door, looked at the shield and gave me the quote. I know lots of his customers are driving to Fort Myers where he has an arrangement at / with Seminole RV that allows him to get the work done on their property. FWIW, I have no incentive or other benefits by suggesting his services, just happy with the outcome for our coach, a good honest service deserve praise as far as I am concerned.

    Good luck, safe travels!

  • Bill

    Member
    January 20, 2020 at 6:50 am

    Mine looked even worse; I did mine myself, serious PIA; It took me multiple days working off and on. I used Goo Gone and plastic putty knifes. I found it best to do it in the dead of summer in the direct sun.

  • Ed

    Member
    January 20, 2020 at 9:33 am

    First and foremost, any protective film should be removed within the first seven years of usage. Within seven years, it should come off without too much effort. It’s important to have the surface fully detailed prior to applying the film.

    After speaking to experts, I’m to understand the best level of protection is to use a high quality film such as XPEL Ultimate and add ceramic coating over the film. All ceramic coatings are not created equally as the brands sold in Walmart are not the same composition as those used by experts. And, it’s much more protective than automotive grade wax. Applying ceramic coating is not an easy job and is best left to the detailing pros who do this for a living. Film and ceramic coating will give the bus a hard finish that will ease the chore of removing bugs and assist in minimizing rock chips.

    I’ll add that ceramic coating should be applied indoors and kept out of the rain for two to three days to give it time to cure.

  • Dick

    Member
    January 21, 2020 at 5:08 pm

    Thanks Andy, was looking at Xpel but not aware of the need of ceramic coating on top of it.

    AvalonKing seems to be a good ceramic coating? Looking at the 7 – 8 years film removal, ceramic coating investment should be minimal?

Log in to reply.