Archived
Forum Replies Created
-
We will both be attending and look forward to learning more about our new to us ’95 40′ Marathon. Our site number is 60. Thank you for putting thistogether.
-
My guess controls your audio visual equipment and where you want it showing. Salon, bedroom, underbelly tv or lcd screen on the dash
-
You can buy Peak (OAT) Final Charge at O’Reilleys. Can be purchased in both concentrate and diluted. May not be the best price, but available wherever you can find an O’Reilleys.
-
Hi Ralf – be sure to take a very close look now at how much physical space between the wall and your wife’s current curbside ARMREST exists as a wider chair may not fit OR require remounting of its base to the floor. My wife was interested in a wider seat as our two pups like to sit with her, yet there was not enough width between her curbside armrest and the wall 🙁
-
Art – If I am mistaken, I am sure I will promptly be corrected, but I believe what you have pictured is no different than any other heavy duty diesel engine coolant that is precharged with supplemental coolant additives, and does requires a coolant filter WITH supplemental coolant additives, along with regular chemistry tests via the readily available test strips. My 14L Series 60 states this type of coolant should be replaced every two years.
Seems with all the prep work you intend to do now would be the perfect time to change to an OAT coolant such as Peak brand Final Charge or Detroit Diesel Power Cool PLUS (each of with requires the blank type of cartridge you mention). Final Charge states its chemistry is good for one million miles without any additive at the prior six year mark.
I, too, am preparing to drain, flush and change my coolant and have decided to use Peak brand Final Charge, which is manufactured by the same company that makes DD Power Cool Plus. The name of the company is Old World Industries.
Here are two links to the product in your photos. “Extended Service Interval” is not defined. Again, I believe this particular coolant is no different than that which you drained three years ago – just a different color.
https://prestonecommand.com/wp-content/uploads/PCMMD-AFCPurple_PA1862.pdf
-
Archived
MemberMarch 12, 2021 at 4:56 pm in reply to: California Looking To Restrict Out-Of-State DieselYet another reason to not go to California
Chuck
-
Has anyone ever thought about putting two lights over the engine temp gauge?
First light would indicate the low speed fan kicked in, second light high speed kicked in.
Should be straightforward to do, but maybe not simple.
-
Richard, the six-pack of Skinner solenoid valves is directly below the driver’s left knee or so, on the ceiling of the steering bay. It’s custom made using those six valves and brass fittings and nipples. The driver controls are electrical toggle switches on the left panel. All of those wires run to terminal blocks on the back wall of the steering compartment, above the accessory air tank.
-
Good stuff Jon. Can u explain how the A tank is pressurized with the shureflo and meaning of multiple flushes.
-
I am having level low issues in the front of my coach and because of the year of my coach, I have not been able to track down the control (Valves) so I can check their function. I notice you posted a picture of valves that control your level low.
If I may ask, where are those located on your coach?
Richard
-
Well my lack of patience finally paid off last night! I went back and removed some of the same closet panels I had been in before, bigger mirrors and flashlight and some contortionist home training… VIOLA there they are!
If it helps anyone else with an old XL Liberty like mine, They are forward of the last closet (where my combo was) Very low beside the road air channel, and well hidden by the vent pipe from the W/D and water tank. OR if you are below the coach, 26 inches forward of the drive axle airbag (above the floor line of course, but you can see the airbag from the inside with the dryer vent hose removed)
-
Marshal, my son’s company has a kit for the K&H to make it flush mount.
-
Hello,
I have very little room left in my Water Bay. I just got in a 2 gallon accumulator tank but it is too big to fit.
What option is best?
1) try to find a 1/2 gallon or so small tank that would fit in my bay.
2) Install the 2 gallon tank under my bathroom sink. (This is on the opposite side of coach maybe 10 feet away from bay valves
Thoughts?
Thanks
1998 XL Featherlight
-
Guilty, I am attached to my phone like an alcoholic is attached to their bottle. There are times I put it down for hours on end, but when I pick it back up I may be on it for up to an hour or two. I’ll accept intervention if someone offers.
-
Assuming you have no other accumulator tank, you need to. The mach 5 will run often for short periods of time without an accumulator.
When I installed my new mach 5 w/o accumulator, it overheated from frequent cycling and shut itself off. Of course, my fresh water temp was over 100F so your mileage may vary!!!