Jon
Forum Replies Created
-
Jon
MemberFebruary 22, 2022 at 10:03 pm in reply to: Big Difference in SOC of the Chassis BatteriesAlso maybe pictures that show your batteries, cables and how they route to your Vanner.
-
CarlisleBill, the timer valve has always leaked h2o. The company is out of business. I’ve had it bypassed since we bought the bus. I don’t have any info about it. I have no idea how the thing works or what its function is.
Anybody want it? I don’t. -
Pay attention to what Dick just said.
Walking away or asking to speak to someone who is not making stuff up is your best bet.
-
Here is that relay. Wondering why there needs to be a relay in between the VR and the alternator. I ordered the Transpo #698, it will be here sometime next week, I can’t really test anything until I get this. Does anyone on here understand how the VR works? I have a variable power supply that i connected to the Positive side of the VR, and I put a meter on the field connection. When i varied the voltage the field voltage did not have a linear affect. In fact when i set supply voltage to 13.6 the field went to 5V. an it would jump all over the place as i went from 14.2-12 on the feed side.
-
Is it a Microphor? If so, the flapper gasket is replaceable, some claim to do it without removing the toilet, but I had to remove mine on 2 coaches to replace the gasket. There is also a tension adjustment for the flapper. Parts are outrageous.
-
The “PC Map” should be link on home page next to FORUMS, MEMBERSHIP BENEFITS, PARTNERS, etc. to provide top of mind awareness. Many members of the Forum probably don’t even know its there!
I think there has been a shift in online forum use over the last few years for ALL sorts of interest. The shift has been to Facebook. Which I think is a double edged sword in the long run. If you aren’t on Facebook, you’d be surprised to know there are probably six to nine different Prevost orientated FB pages with varying levels of activity, some much more than others.
One of the big downsides for those on Facebook and aren’t on the PC Forum, they don’t get the wisdom, knowledge, experience, or insight of Jon Wehrenberg which on most subjects is well worth the annual PC dues.
-
Chuck its my understanding that a single color was the case for lower-end, mass produced cars. The high end luxury cars were a different case. I think if those were ordered bespoke the buyer chose the color.
The Ruxton Company reached out to artchitect and set designer Joseph Urban for the paint schemes: “When Ruxton finally went on sale, some models sported Joseph Urban color schemes designed to lengthen the appearance of the car through broad bands of white intermixed with vivid colors such as blue, lavender, and navy blue.”
https://blackhawkcollection.com/project/1930-ruxton-model-a-sedan/
-
Our 2001 Marathon coach, #0670, came with a Marathon installed anti theft alarm. It is no longer state of the art but it works.
-
Mike, you might want to contact the folks at http://www.elreg.com. They should be able to help. They’re a DelcoRemy dealer/distributor and sell all the parts etc.
-
Mike-
I meant, since you know the build number, they may have the records of exactly what your coach had on board when it left the factory. As to the “missing Vanner” and the wiring diagram on how they were wired.
-
John, Thank you for the pictures looks just like mine.
-
Thanks for posting that John. That may be a handy reference for those of us who are dealing with this. Jeff
-
I have not reached out to them yet, They might send theirs out to a specialist for evaluation and repair also. They are on the west coast, so that is good for me. I think there must be someone out there in this vast country of ours that works on bus and truck alternators and starters.
-
Jon
MemberFebruary 6, 2022 at 12:49 pm in reply to: Time for shocks replacement while doing airbags?Thanks Tom!
Wish I had a place to work on the bus. If it took you 2 hours it would probably take me several hours longer as I haven’t done a bus before. But I have done all my vehicles shocks for many many years.
12 hours x 1700 per hour = $2040 just for installation seems ridiculously high.