Jerry
-
Jerry replied to the discussion Front air system charging up fully in road mode question? in the forum Pneumatic 5 months ago
Front air system charging up fully in road mode question?
Richard when you installed the new ride height valve did the front of the coach level out or has this been an issue even after you installed it? If it did not level out after installation there is an issue. Looking at the operation you have an air input line (air feed) and an output line (to the bag) to air up the bag. So if you reverse…
-
Jerry replied to the discussion Upgrading from AGM to LiFePO4 – Keeping it Simple in the forum Electrical 5 months ago
Upgrading from AGM to LiFePO4 - Keeping it Simple
Yep for sure…have to do one at a time, it could get overwhelming. Let me know how your inverter upgrade and battery replacement goes.
-
Jerry replied to the discussion Upgrading from AGM to LiFePO4 – Keeping it Simple in the forum Electrical 5 months ago
Upgrading from AGM to LiFePO4 - Keeping it Simple
typo on the Victron units….They are MultiPlus-II not MultiPlex
-
Jerry replied to the discussion Upgrading from AGM to LiFePO4 – Keeping it Simple in the forum Electrical 5 months ago
Upgrading from AGM to LiFePO4 - Keeping it Simple
Hey Jeff,
No I put that on hold last summer decided to remodel the salon and cockpit with new vinyl plank flooring. I’ve been pricing Vatrer and LiTime Lifepo4’s, but thinking about keeping my Xantrex inverter/chargers based on the location. I thought about Victron’s but I will need to totally reconfigure the bay because they are…
-
Jerry replied to the discussion Service Manual source for vintage 1984 Prevost? in the forum *** General Discussions 6 months ago
Service Manual source for vintage 1984 Prevost?
Hey Richard,
I attached the link to prevostcar.com which you can input you coach info and search for tech pubs and maintenance manuals. They will be in pdf format.
https://techpub.prevostcar.com/technical-manuals
-
Jerry replied to the discussion removing the trim molding on the Marathon XL coach in the forum Chassis 7 months ago
removing the trim molding on the Marathon XL coach
Hey Cal,
I have a 93 Marathon XL….mine has a wood trim held by wood screws…you should be able to remove that wood trim and you should see how to remove the locking mechanism. Good Luck.
Jerry
-
Jerry replied to the discussion Buffing Stainless siding? in the forum *** General Discussions 7 months ago
Hey Richard,
First I would look for a semi-truck detail shop they should be able to help you or direct you to a shop that can get the polishing done.
-
Jerry replied to the discussion Hummer H2 Towing in the forum Towing 10 months ago
Hey Ronald sorry for the delay on the reply…..I use the Roadmaster Sterling All Terrain tow bar…its rated at 8000lbs. which would work for your Hummer’s weight capacity, but as Mike mentioned you would want a setup that would match your vehicle weight.
-
Jerry replied to the discussion Mobile WIFI for Streaming in the forum *** General Discussions 10 months ago
Hey Marc….I’m a Verizon 5G users with a peplink mobile router. It serves me fine with 150 Gb monthly.
-
Jerry replied to the discussion Hummer H2 Towing in the forum Towing 10 months ago
Hey Ronald…..it shouldn’t be an issue as far as if the engine being strong enough.. The Hummer should be pretty close to the weight of a full size pickup or SUV.
-
Jerry replied to the discussion Drive axle studs in the forum Chassis a year ago
Hey Eric….sorry to hear your dilemma, but if the shop broke the lug they should fix it don’t you think? Unless your not feeling their service quality, but that would be my first step. In any case though not seeing where the lug was broken makes it a little harder to answer your question. On the dual wheels you have the large nuts on the…
-
Jerry replied to the discussion Marathon Water System Question in the forum Plumbing a year ago
Marathon Water System Question
Terry is correct on my XL you don’t need the pumps when connect to campground water. I have a tank fill button that operates a relay to open the fresh water tank for filling….but I don’t use my pumps when connected. I use bottle water for drinking…I’m not that comfortable with using my fridge water until I replace my old Amana Fridge next year.
-
Jerry replied to the discussion Oil Change in the forum Generator a year ago
Hey Art….that’s a tough question because some tech’s would say yes change it based on time. But if you don’t live in a cold climate where the temp in the winter goes below freezing….my opinion would be don’t worry right now…I mean its your preference in my opinion. But they do say change oil based on number of hours and length of…
-
Jerry replied to the discussion Replacing Lower SS Bay Door Panels in the forum What did you do to your bus today? a year ago
Replacing Lower SS Bay Door Panels
Hey Art….sorry for the delay in responding. I kinda forgot about the pictures but I did take a few…posted. It was a fairly straight forth process.
-
Jerry replied to the discussion Upgrading from AGM to LiFePO4 – Keeping it Simple in the forum Electrical a year ago
Upgrading from AGM to LiFePO4 - Keeping it Simple
Yep I only have one alternator.
- Load More