Jeff
Forum Replies Created
-
Art – are those new blue hoses from Prevost “soft” compared to your old ones? My current hoses are as you describe your old hoses. When you have time, would you mind sharing the part numbers of the hoses you ordered from DD
-
Ok. Joe told me I could do this and I told him that he was underestimating my stupidity. Boy did I ever prove him wrong today.
Going by his accurate instructions I was able to loosen everything and push the cylinder toward the outside.
At that point, the cylinder was supposed to screw out, but I could not get it to budge. Did I miss something or several somethings?
Thank you,
Davy
-
OAT is what you want…
***NOT*** NOAT (per my DD Series 60 Research)
Peak Final Charge is available at most any Walmart or NAPA / O’Reillys etc
You will see reference to Final Charge “CONVERTER” (link below). I am thinking of converting first, then driving say five hundred miles, then draining and then refilling with Final Charge OAT. Thinking this approach, which would only cost about $150 extra, yet would ensure ALL of the coolant in the system would be OAT, then simply do a typical drain and refill without all the flushing.
GOOD NEWS is that Final Charge has test kits available for their OAT coolant whereas in the past no test strips were in existence. More good news is that there is no longer any mention of adding “extender” at the six year mark. Their literature states for on-highway use, one million miles.
-
Other than appearance, what are the advantages to moving to an induction cooktop? I have a Seaward electric cooktop. Not sure if it is 120 or 240, but I will find out.
R
-
There is a double track in the floor that the chairs are mounted to. Maybe some modifications to the floor covering would be required to be able to slide the chair in board.
-
Mine was getting hard, not hard to turn but had to wiggle it to turn, felt like it was catching on something. I also replaced the outside door handle. So I removed the deadbolt out and took it to a lock smith and 18 bucks he rebuilt it. Put it back together and it still had a small catch in it. I figured out to adjust between door handle and deadbolt and it worked like new. Had to play with it a little you can see on one photo slots longated to adjust
-
We had Stiches (club members) redo ours. Georgious job. Customized the density to my weight and extended the frames so the backs are now taller to match our height.
-
There is no way to maintain constant coolant temps given the way coolant temps are managed.
The primary coolant temp controlling device is the engine thermostat. It opens at a temp below the low speed fan temp, and closes quite low, somewhere around 175 (that’s a guess). The fan clutch engage temps are 204 for low speed and 208 for high speed. (yours may be different, depending on how your DDEC is programmed).
So in normal driving your engine temp is going to raise enough to fully open the thermostat. Since the thermostat full open temp is lower than the low speed clutch engage temp the fan is not going to be spinning under power and air flow through the radiator is not going to be significant. So temps will rise above the thermostat full open temp until they get to the low speed fan clutch speed of 204, at which time the fan will spin and you will see the temps cycle back down to the temp at which the fan clutch disengages.
On hot days with the engine working hard instead of cycling as described above the engine temp may continue to climb above the low speed fan clutch temp of 204 and at 208 the high speed fan clutch is engaged. At that point you will see the temp cycle back down to the point at which the high speed fan clutch disengages. and if you reduce the load on the engine the engine temps may even cycle down to a lower temps. but the point is your temp gauge is not going to remain at a constant like oil pressure.
Just as a point of information, the low speed clutch will move a lot of air. But when the high speed clutch engages the amount of air being moved makes the low speed setting seem low. The high speed is moving enough air to blow the face off a dog.
-
Marshal, I replaced my Gaggenau with an induction cooktop I purchased from Rick. For my 02 H, it was a drop in replacement. Here’s a post from Rick that has dimensions of the induction that may help, assuming your Gaggenau dimensions are the same.
-
Did i touch a sensitive nerve, mentioning a flip phone. If I used a name people may not have known whom I was speaking of, but by saying the guy with the flip phone, they knew exactly who it was. Haha
-
My Decel button was stuck a little spray silicone, work button but mine lights when lights are on
-
Guys , we have used our coach for business the past 6 years . Most of what we do is 100% legitimate business . I guess the trips to Indo Ca and Sturgis are also legitimate since we do visit dealers and take them out to discuss Furniture 🙂
You see I have a sales office in King of Prussia Pa where my business is based . We decided years ago to locate our Warehouse in S.C. for cost issues when compared to Pa . We also have a satellite warehouse in Fla where we also have a residence and 3 of our daughters reside . We have averaged over 35k miles @ year and to be honest it is getting old . I look forward to keeping mileage under 10k @ year with the ability to stay in one spot longer than 10 days at best .
I will add that the cost to keep the coach running and up to snuff far outweighs the tax savings . Not to mention our coaches over the years have been rode hard and put away wet so i look forward to have a coach I can call a Mistress and not tool .
-
I have had Toyo, Goodyear, two Continentals till I could find Michelin’s.
I really think the two complete sets of Michelin’s I went through were the best.
check the speed rating on the other brands, that could be an issue.
The Toyos were 65 and I think the newer Michelin’s are 75 mph.
-
Looking for a new bus?
