Fred F.
Forum Replies Created
-
Mike,
Give Fred a call at AAP in Virginia. He is the expert in rebuilding cruisair units. I stopped by his place to recharge my units. Excellent experience.
-
Humm, what happened ED?
-
Dan – What was done at Prevost? Did the high ride height happen when you left Prevost or was it OK?Good advice from Prevost on the aux air and compressors, they make a ton of water. Kudo’s to Marathon for isolating the Marathon aux air and keeping it separate from the Prevost aux.
-
Jon, re the garage – size matters, re the split window – charisma matters.
-
Thanks for the advise
look forward to finally meeting some of you !
-
Gerald,
No access underneath, it seems to have a 1/4″ thick plate that spans the window behind the TV that it’s attached to. I’m wondering it they took the window out to have access behind the TV. It’s acually a monitor, and it cuts off after about 20 min of use. I can take power away, turn it back on, and it will work another 20 min before the screen goes blank again.
Plan to update them, but until I can, I would like to fix this one, or replace it.
I have not tried removing the shade yet, I will try that. thanks
-
Look good Dan. The Red Head could have built you some out of 1″ steel in her welding shop, then you could really complain about them being heavy. I don’t have a fork lift, so use a furniture dolly. You can also add some handles on the side, makes adjusting / moving and picking up easier than trying to slip your fingers under the end.
-
Dorel,
Contact Mango Mike, he’s parks there every year at some yard and loves it. mike@bbqdelray.com
-
Too late Will………..
Bob treated Scott and I to the Fruit Fritters at the Donut Bank. He said if you were there he might have considered buying you one also. He hesitated a little when he said that because he wasn’t sure if he wanted to treat the guy he claims messed up the traffic lights to such a great pastry.
-
The brown plate is for the OTA antenna on the roof. There is a control that will rotate the antenna when plugged into the plug on the brown plate.
-
Hmm, can’t remember his own name and it appears he cannot remember to hook up the dump hose before hitting the Black Dump button either.
Maybe having a Marathon system, unlike the Rose Petal Dispenser of Liberty fame, he got gassed from the strong gasses eminating from the Black Tank.
Just saying !!
-
Congratulations Karl. We didn’t get a chance to meet Natalie as she wasn’t at the ‘Know your Prevost’ in Vonore, TN, in October 2015.
Take care,
Mark and Craig
-
One time is understandable, 2 times you need to question the operator 🙂
Did his freshly cleaned shoes get soiled?
-
I just went through a Headhunter toilet replacement.
This changeout is not for sissies. I had to change the guts of the flush valve, redrill the bolt holes in the marble floor and use the dumbest toilet hold down method I have ever encountered. I had to run new wiring because Headhunter went from a 2 wire timer to a 4 wire timer. Then Headhunter had to send me a new special timer to get the bowl to fill after the flush because their plumbing assembly installed exactly like their installation manual specified would not allow it to fill.
I cannot imagine how much grief it would be to completely change toilet types based on how difficult it was to replace a Headhunter.
So here is my free advice worth every cent you pay for it: Fix the existing toilet. Unless you have a cracked bowl everything else is repairable and while I imagine Headhunter will charge as much as our national debt for their parts if you decide to switch toilets you are in for a lot of work, in a confined space, and when you get all done it might not work any better or be any more reliable than what you have.
-
Rocky
I wanted to polish my XLII but did not want to take forever so i purchased the buff pro and what a fine job it did. Still took about 40 to 50 hrs. but it looks great.