DON
Forum Replies Created
-
A few yrs ago I replaced all my 12v fuses with Glo-Blo type:)
-
My Marathon guru Bernie always starts with the simple questions. He immediately asked if I knew how my shower handles work. “Of course I know, I’ve been using this shower for 5 months. The top knob is water On / Off and the bottom knob is for temperature and both turn right and left.”
Come to find out after exploring many possibilities and one plumber service call that the lower temperature control knob (right and left) is also a double valve that not only turns right and left but pushes in and out as a water on/off shut off. How stupid of me.
My behind side must of pushed this knob in when I bent over to wash my feet and never realized I shut the water off This is what my family calls a “Jimmy”.
-
Do the switches have power? Ignition key on?
My 96 Liberty 12v Classic there is suppose to be a 10 amp fuse in the converter electrical bay, wire marked AF for air floor.Bill Doherty-Liberty service mgr N. Chicago-800-554-9877 will know. -
There is a cold water supply and a hot water supply to all faucets and the shower valve. If the others are flowing hot and cold water, the problem could be the shower valve.
Another clue you shared is no cold or hot flow from the shower hose connection at the wall of the shower. So, my best guess is the shower valve.
Hope this helps, all the best.
-
Is POR-15 only one color? Or are there different colors? Thanks!
-
Lid to a spray can works as well.
-
more
-
YESSS this is what I’m looking for. I just have the black metal but nothing covering the button.
-
I went with a pit boss. I want to be able to pit a cast iron griddle on it to sear. It goes up to 500 degree
https://pitboss-grills.com/grills/portables/pit-boss-pro-series-ii-portable-150-wood-pellet-grill
-
Olympia Luxury Motorcoach recommended this for the stainless. Works great…just hand rubbed on and hand buffed using several clean microfiber cloths. Looked lustrous!
-
Great find as usual Don. In addition to letting use know how cleaning goes, please also post a photo after its done.
-
did you replace compressor clutch as well ? If so , where did you find it or was it mounted on new compressor ?
-
Always leave it on as long as I have power. Power use is minimal when plugged in shore
-
New member here. This week’s recap
Monday – wired money to buy bus sight unseen
Tuesday – go to pickup bus but was at Prevost repair getting DOT inspection so took a 5 minute quick look and signed paperwork
Wednesday – spent all day at Prevost impatiently waiting for them to do something on the bus. Finally at 5pm it was done and started the 6+ hour trip home and 1st drivr
Thursday – pulled 2 EG4-LL 12V lithium battery banks, Victron Quattro 12v/5000w inverter, cerboGX with touch and pepwave router from old RV into new bus. Got all installed under front bumper with plenty of room to add 2 more batteries and a 2nd inverter (getting 2x 24v inverters so have 240v split phase)
Friday – ripped half wall out of coach to get to those huge beautiful windows, removed blackout film on windows and put counter back in.
Saturday (tomorrow) – pulling fridge from old RV and grabbing new washer/dryer combo to place in bus.
-
Are we getting another event in 2023? I missed the last one.