Dick
Forum Replies Created
-
Won’t work on the metal tanks. It needs a plastic stand pipe plumbed into the system to show level correctly.
-
See your Prevost mx manual. In mine its Section 22, 8.1.5 on page 22-23, and 7.4 on page 12-16.
He’s a link to mx manual for 1990-2000 XL: LINKGood Luck -
I have heard about an after market tuner from prevost to increase horse power and fuel consumption.
Larry Nelson
2002 XLII Vision
Hurricane utah
-
So since Josh is your stepson…I have a bill for you for raising him……
-
Dick
MemberJune 28, 2021 at 12:58 pm in reply to: Turn signal Retarder connection to Steering columnGood to know. Thanks!
Yes, it’s a drag, as it takes two hands to use either the turn signal or the retarder.
-
Dick
MemberJune 28, 2021 at 12:03 pm in reply to: Turn signal Retarder connection to Steering columnVery common on my bus. I had to ask my mechanic to fix it twice. I believe there is a tiny set screw missing. Had they not solved it – I was going to just put some 2-sided tape between the column and the ring. It is a real pain when it happens.
-
We spend a lot of time at Texas race tracks racing. It gets plenty hot. I applied a product 4 yrs ago called “Temp-Coat 101”. It is very effective at insulating our bus roof and durable. Not much prep is required. No Regrets.
-
Chad, he lost his franchise for the blow up dolls..
-
I’m pretty sure that mine has 1/4″ DOT brake line coming out of it that vents up near the ceiling of the engine bay. FYI, don’t know if my gear box is Superior… just reacting to vent hole reference.
-
We have the Allen Bradley system too and I haven’t thought much about cold temps there. I think there’s a small electric heater on the ceiling. I’ll have to check what temp its set at. I wonder what circuit breaker its on.
-
Jerry, this is GREAT information!
Thank you!
-
If I had to guess it is filiform corrosion under the paint. It is common on aluminum due to poor pretreatment of something that broke the finish surface and allowed entry of moisture which “rusted” the aluminum.
Aluminum is incredibly hard to paint or finish, such as with powder coating. It reacts quickly with air to corrode unless it has a high quality surface treatment.
-
Thanks all. Was hoping it was the constant flexing that caused it. Sure be better if they used something like braided stainless.