Dick
Forum Replies Created
-
Tim: Its more than the compressor trying to keep up; the issue cascades into other issues. If you have leaks going down the road with the Detriot Diesel running there is LOTS of compressed air so leaks are probably rarely an issue.
But if you stop and dry camp (relying on the generator to recharge the batteries) the compressor running all the time will eventually result in the generator running to recharge the batteries which have now be discharged by the compressor. Also the compressor running every few minutes is annoying to most people.
If you’re camping with 50amp service the electricity is someone else’s problem, you just have the annoying compressor going on and off.
If you’re plugged in at home, then you’re paying for the electricity to run the compressor regularly to replace the wasted compressed air.
-
Is the real issue of air leaks that at some point your compressor or aux. compressor cannot keep up with the leaks which creates some type of safety issue? At what point do you do what Jon is doing and simply replace everything, 10-years or simply when the air leaks overwhelm your compressors?
Also, is this issue unique to Prevost or do other DP have this issue as well?
-
D&C
Web not slow, just smart. It knows that Tom and Big Al can’t read very fast, so it is just typing at the speed that they can read.
3F
-
The new heat relieving regulator…… hoses in correct ports ?
I’am also going to suggest you change the wheel style drain valve as these are on the hit list. The valve replacement can be purchased any where . Finding a skinny one might be a hunt.
Last idea .. If you drained the system down have you lost the seal on the Norgren air moisture valve in the drivers bay.?
This is the one that has a water drain under the bus.
I’am trying to help… posting suggestions as somewhere is the source of your leak.
-
Here is the proud new owner now…..

-
Me neither but spay can silicone will end up on painted surfaces far from where its sprayed. I have done a fair bit of car painting as well and know first hand that it is diffcult to paint over. Just saying be careful.
-
Thanks John. Mine it has 2 holes/channels approx 3/8 dia, with couple wires/bulbs attached running thru.
-
Silicon spray on the bay door locking pins?
-
Have a picture of window?
-
Hi, new to the forum, joined in hopes of being able to help you folks out anyway I can, I have been working on Prevost coaches for years and have numerous certifications from them. Feel free to contact me with any questions, I will do my best to help.
A couple of notes, as far as drum brakes, going in reverse prevents the pop, the pop is from the shoes being rusted up, and the brake chambers binding slightly, only takes a short amount of time. Also, make sure your slack adjusters and S-cams are being greased, it’s important to grease S-cams to where you can see the grease come out, don’t want to over grease or you will get grease on drums and shoes, doesn’t help stopping power.
Now on to knorr-bremse/bendix… As far as shops rebuilding calipers, you won’t find to many except Prevost centers and dealer repair shops, the bushing and pin tool kit is just under $4000 to purchase, calipers come in 3 versions, SB-7, SN-7, and a updated version of SN-7, difference is the slide pin boots/caps. The SB-7 you will find on most 2000-2010 H3 and X3/XL, these are notorious for ripping boots causing pins to corrode and not slide properly, the newer SN-7 calipers are much better, but still have issues. As far as rotors, they are pretty solid,I would not turn these rotors, just put new pads and let them cut in. when replacing, make sure that you order what you need, they come in vented and solid. They are not to bad to change, but will need lots of heat for drive axle as they are attached to hub with 10 Allen head bolts. Steer and tags are not bad, they need to be jacked off the face of the hub CAREFULLY!! Anaerobic sealant is required after cleaning the face up. Point is with brakes, don’t cheap out, it’s the most important part of your coach, use OEM parts, the cheaper stuff is junk, some are out of round right out of box, no good.
As far as original post with split rotor, YIKES! I’ve seen them split when replacing, but mostly just cracking on the faces justifying new rotors. -
Would you take your bus onto the flats or does the salt make it a no-no?
-
I presume from the picture we are looking at a brake rotor that has cracked into two halves? I’ve never seen that before (not that I have much if any experience with truck or bus brakes). I presume the bus rotors are similar to the ventilated racing rotors that we use on the race car … cast iron with the center vents cast into the rotor then the faces, circumference edge, and mating surfaces machined.
Speaking of brakes. Yesterday we took the coach for a ride. Fired it up, let it warm up and air up. Once warmed up I depressed the service brake, released the parking brake, and shifted to drive which is normally enough to give the coach to move from its parking place on almost level concrete. But it didn’t move. I thought may I didn’t properly release the parking brake (but the trans went into gear), so I put the trans in neutral, set the parking brake again, applied the service brake, released the parking brake, put the trans in drive, released the service brake, still no move.
This time I applied a little throttle and there was a noticable “clunk” from the back end of the coach and we moved forward. I presume the parking brake was hung up. The last time we parked the coach was on our trip back from Indy and we’d been driving through heavy rain for hours and it was raining heavily when I parked on the driveway near the road. The following morning in the daylight I backed the coach into its parking placed (no rain now) without incident.
Can someone explain what happened with the brakes. Is that common? First time that happened in the year we’ve owned the coach.
-
James did my delam repair paint because Ft. Worth Prevost had stopped using the shop in Denton. My good luck. James and his staff were great to deal with and did a wonderful job. They even did some touch ups that had nothing to do with the delam project just to make the coach right.Great job and very user friendly ! They even have a nice facility in their building for overnights if needed.
-
Must be the dictionary in WI is different.
il·lu·sioniˈlo͞oZHən/noun-
a thing that is or is likely to be wrongly perceived or interpreted by the senses.“the illusion makes parallel lines seem to diverge by placing them on a zigzag-striped background”
synonyms: mirage, hallucination, apparition, figment of the imagination, trick of the light, trompe l’oeil; More -
a deceptive appearance or impression.“the illusion of family togetherness”
synonyms: appearance, impression, semblance; More -
a false idea or belief.“he had no illusions about the trouble she was in”
synonyms: delusion, misapprehension, misconception, false impression;
-
-