Forum Replies Created

Page 148 of 214
  • Dick

    Member
    April 26, 2016 at 10:10 am in reply to: 2016 East Cost – Parking / Stop over suggestions

    Ron, thanks for the suggestion, was looking at it yesterday, but was not sure about driving conditions / tree clearance so was waiting to call in this morning.

    Interested on the pull thru sites, pending availability on our travel dates, returning from Bar Harbor on our way to Quebec City….

    We left for Pelican on the 7th, we’re looking for you around the 1st, you guys got stuck in Louisiana?

    John, thanks looking forward to July…I received the details, will let you know as soon as the planning is firm.

    Regards

  • Dick

    Member
    April 25, 2016 at 6:27 pm in reply to: Kentucky Derby 2016

    Dawn, they have 30 and 50 amp. No individual water and sewer, but both on sight. The entire facility is restricted entrance and patrolled by Police. Geo.

  • Dick

    Member
    April 25, 2016 at 12:22 am in reply to: Front end alignment on a solid axel coach

    We bought our 1999 Liberty XLV in May of 2014. Right from the beginning I was always working the steering wheel. I suspected that the steering box was a little loose (what did I know). Left to right, right to left, over and over again.

    While at Jeff Rowe’s in January of 2015 we ran into longtime, multi-Prevost owner/operator Peter Campbell who at the time was working on his appreticeship under Jeff. I mentioned the handling to Peter and Jeff and Peter immediately said we needed a three axles alignment and the ONLY place to have that done was Prevost. He said under NO circumstances should we even think about taking it to a “truck shop” … and I think Peter’s family is in the truck shop business.

    Since we were going to Florida I made arrangements with Prevost-Jacksonville for the work. We arrived Sunday night for our Monday appointment, set up in their campground, and at the appointed time on Monday morning the tech arrived at the door to take the coach in. I followed it. The tech put the coach up on a chassis lift (not wheel lifts like Jeff has, but infloor hydraulic cylinders). First thing he did was check the play of the front end and announced that the tie-rods were loose and said, “Often a coach of this age and miles has loose tie-rods which is why I had the parts set out on the floor before we brought the coach in.” He said aligning the three axles with tie-rods even a tiny amount loose is a waste of money. He changed them out.

    Then he set up the laser alignment system and explained to me what he was doing. I told him my theory on the steering box, he said “remotely possible but unlikely … we’ll know in a few minutes.” Once he had the alignment system all set up and he showed me that the drive axle was WAY out of alignment. Passenger side too far forward. He said it had one of the largest stack of shims on the right side he’d ever seen. I asked if it came from the factory like the and he said he’d never seen that many shims on a factory alignment in his career and said it was most likely done in the field by someone didn’t do a very good job.

    His assessment made sense. The drive axle was acting like the rear end of race car set up for left hand turns, driving the coach to left. I’d correct to the right, relax, and the drive axles drove the coach to the left again. Over and over and over again.

    He showed me on the screen what is within “factory spec”, explained how the coaches are aligned at the factory when the rear axles are installed, and then proceeded to align all three axles as perfectly as possible. The tech shared with me that he has been able to improve the alignment of virtually factory new coaches in a handful of instances.

    There were four other M/H coaches in at the same time ours was (plus Roger Penske’s personal “NASCAR” coach down from NC) and three of us ended up with all new shocks … I opted for Koni’s on the front and OEMs on the rear and the think the other two coaches got Koni’s all around). Once one of us started taking shocks, the rest got the new shock disease.

    We left on I think Wednesday morning after waiting for a part that didn’t arrive (boot on top of a front spindle … $10 part that they didn’t have in stock which I found awfully weird). As soon as I got out on the Interstate headed north I realized our money had been very well spent … no more fighting the steering wheel. The coach tracked very, very straight. HUGE improvement over what it had been.

    So I learned two things:

    1. If a Prevost just doesn’t seem to handle right … take it Prevost and have it aligned.

    2. Peter Campbell really knows what he is talking about!

  • Dick

    Member
    April 24, 2016 at 11:39 pm in reply to: Holding Tanks wake up

    Peter,

    Just curious do you think its simply hard headedness. Surely not the $. I know they fight weight but Come On Man.

    Bill S.

  • Dick

    Member
    April 23, 2016 at 2:41 pm in reply to: Which conversion

    I have owned 6 Prevost’s, 5 new and 1 used, 5 XL’s and 1 H. I prefer the XL so all in the party travel on the same floor level. Some prefer the low driver sitting position. Also, for me, the H seems top heavy in tight turns, but that may just be a personal thing.

    You might be wise to purchase a good used unit and use it for a year or two to see how you fit into the lifestyle. It could save you big bucks if you find you don’t enjoy the hassle of coach ownership. Many do not and come and go. If you enjoy the lifestyle and can put up with some frustrations other travelers may not experience, then go for the big deal. Break out a couple of million and go for it!

    Every owner will tell you their converter is best, but they all have pluses and minuses. I owned two new Liberty conversions with all the bells, whistles and toys. I later opted for 3 new Angola conversions (no longer in business) and found them to be more simple but just as well built.

    I own an old 1990 Lindin conversion XL 40. At my advanced age I find it big enough and simple enough and cheep enough to enjoy. Like everything else. It is all in the eye of the beholder. Also, it helps if you are mechanically inclined. Hope this helps in some small way.

  • Dick

    Member
    April 23, 2016 at 7:35 am in reply to: 2 year old house batteries expected usage?

    No matter what u do if you dry camp you will have to start the gen to heat the hot water for shower etc.

    Tom any idea if you let the auto start do its thing how many charge and discharge the life lines will go compared to always starting at 24.4 manual ?????

    I am doing a study now on it on how long the batteries will go in years. Compared to always starting at 24.4 I have done that study already

  • Dick

    Member
    April 22, 2016 at 6:51 pm in reply to: Holding Tanks wake up

    Even though Liberty has a lifetime warranty to the original owner,it does not cover the tanks because Liberty did not manufacturer them.Liberty designed the tanks and specified the material but they will not warranty them because a Outside supplier built the tanks,I think that this will cost Liberty customers in the long run.

  • Dick

    Member
    April 22, 2016 at 3:47 pm in reply to: 2 year old house batteries expected usage?

    oh and when exactly should the autostart kick in? All invertor circuits where dead and the generator still hadn’t kicked in, even with autostart light still showing red)

  • Dick

    Member
    April 20, 2016 at 7:31 pm in reply to: iPad upgrade

    Chris, give me a holler back in Chattanooga. Hawkins and I get together every so often and help each other on coach maintenance.

  • Dick

    Member
    April 19, 2016 at 11:28 am in reply to: Hours vs Time

    I guess I just want to exercise my generator. I have OTR, but I start the generator as I pull into the rest area and start several AC units.

  • Dick

    Member
    April 18, 2016 at 1:34 pm in reply to: Can 30 AMP do this

    We talk about remote panels and dip switches to reset the inverters? Not sure what this is?

  • Dick

    Member
    April 18, 2016 at 6:41 am in reply to: Hours vs Time

    I think we all tend to change fuel filters too often. We tend to be programmed to include them with other scheduled maintenance. The reality is we can pass a lot of fuel through them before they need changing unless we get or have bad fuel with dirt or algae. In that case you cannot change them too often and typically we end up changing them just to keep the coach running.

    The difference between hours and miles is how we are able to measure use. I suspect if we really wanted to be most correct the best unit of measurement is the amount of fuel that has flowed through the engine. That reflects not only the hours or miles of operation, it shows the amount of horspower used. The less horsepower used the less fuel will flow and that means in the case of oils the engine stresses are less. Run at high horsepower settings such as at higher speeds or under greater loads and the oils are subject to higher temps and stresses. Intervals will be more or less depending on how hard we run the engines regardless of hours or miles.

    This is not scientific, but when I look at the average speeds I drive in all my vehicles it seems to be between 40 and 45. That suggests if our generator oil changes are called for at 100 hours as an example that might be the equivalent of 4000 to 4500 miles. Conversely if the engine had an hour meter and we did a routine service at 200 hours we might find that is in the 8000 to 9000 mile range.

    I seriously doubt any of our filters are anywhere near being plugged at the recommended change intervals, but the object is not to use up their life, but to have them to protect the engine when needed.

  • Dick

    Member
    April 15, 2016 at 11:12 am in reply to: Whirlpol Refrigerator busted

    When the very common Amana on our coach quit, we installed the Sears Model Kenmore 51789 as Tom suggested. It fit very well in the hole that Liberty made for the Amana. Hopefully the hole for your Whirlpool will welcome the Kenmore 51789 with open arms.


    The only thing I didn’t like about the Kenmore 51789 is that it doesn’t come with all the necessary shelves, drawers, and door tubs. And that stuff isn’t cheap when you go to buy additional ones off the the Sears website (which in my opinion is not very user friendly, and a great of example of POS). I concluded having limited, high dollar accessories in the refrigerator was a strategy of Sears to get the price down.


    When posted our refrigerator problem on the Garage Journal Forum I had all kinds of recommendations to check this and check that and be ready to replace the defrost heater thermostat and defrost timer as another PC member indicated. But at this point I realized that a refrigerator installed in 1999 isn’t going to last forever the previous owner and I got 16 years of great service from it and it was time to change it out. My fear was that it would really fail for good on the road and ruin a trip … like to Alaska.

    Good move taking it to Parlliament. I’ve heard good things about that shop.

  • Dick

    Member
    April 14, 2016 at 10:48 pm in reply to: Cruisair charging

    You need cruise air manual #L-0261 but since you do not have one you can remove the caps on the high and low side (not the red one) hook up your gauges and then open the valves counterclockwise a couple of turns.If I am going to only add freon I only hook the gauges to the low side(large copper tubing)and add freon,the unit must be running to add freon but if you have vaccummed it do not turn it on until you have at least added enough freon to be on the positive side.Normal recharge is through the suction side (large tubing)you can add and with your hand feel the tubing and when it gets real cold STOP.I use an infrared heat gun and aim it at the valve and get it as cold as it will go with little squirts of freon.Remember counterclockwise opens the valves.These are known to leak out from the glands of the valves so it might be a good idea to check for leaks around the glands,it takes a 7/16 wrench to tighten the gland nut.When they are tuned up they will really cool very well.

  • Dick

    Member
    April 14, 2016 at 1:40 pm in reply to: Driving to Bella Terra

    Augusta RV Park is Heritage RV Park, 3863 Wrightsboro Rd, Augusta GA 706-863-3333.

    I put it on the PC map.

    2 turns off I20 on the west side of Augusta. No pull-thrus though. Nice clean place to stay. Owner Don is also an RV’er.

    We are going to Bella Terra too – See you in Foley!

Page 148 of 214