Tim
Forum Replies Created
-
All points taken under advisement. I was just really saying what I “would” like. I am flexable, honest I am. I sure don’t want a coach that comes with the complete Barry Manilow collection (just sayin).
Jon like yourself I have never been to a whore house….. honest !
Now thinking a bit more on the OTR. My wife is going through the change and is always HOT !! maybe that should be under the deal breaker section.
Additionally, I am a carpenter by trade and could make and install all new cabinet fronts and wood trim as needed. Furniture can also be exchanged.
Dale
-
Each time I get unwanted call I put phone down by computer and play a song by Paul Thorn on Utube. Song is “its a good day to whup somebody’s ass” it has the desired effect!
-
That is a great feature, and if in fact that feature is available why can’t it be a universal feature on all phones and phone systems?
Just based on the number of calls we get at home, and how many we used to get on unlisted cell phones the potential number of calls to block would seem endless, but well worth the effort. Some of the worst calls are the robo calls that seem to happen daily. If we could block just a couple of them we probably would cut the annoying calls in half.
-
Since my former company made what are called “temporary power outlets” we used tens of thousands of the breakers used in shore power boxes. We used them from every manufacturer including Siemens and Square D. Every manufacturer makes them for home use in the electric panel installed in every home. They were never designed as switches, but solely as devices that were to trip if the current flow exceeded their value, and for the occasional shutting off of the circuit.
But UL in UL-231`which is the standard that controls the design of the shore power boxes and is used for certification does not allow or provide for an alternative to the circuit breakers. The presumed use of the boxes is by contractors who will install one outside a house under construction and use it to power their various tools.
For such a simple product they are truly maintenance intensive because the torque has to be reset periodically at the wires and cables and the entire breaker needs frequent replacement. I would not expect the breaker for the generator to be a maintenance issue however because it is not used as a switch, and because we rarely approach the ampere rating of the breaker.
-
This is what the inside sidewall looked like when we puled the tire. The tire guy said it looked like an “impact blowout”
-
I cannot remember ever running the cord reel in or out with the engine running so I am not sure that is a factor.
I do believe where and how the assembly is located is important because the proper coiling of the cord is important. I have watched mine both going in and out and somehow it is being fed into the tub in a somewhat straight line, but it always coils in a circle. If I ever were to see it not coil itself in or out I would run it out all the way and make sure it has not twisted itself.
One thing that is very troubling to me but has been OK for my four years of use is my cord picks up a lot of heat from the engine. Unlike the previous one that was located in the OTR evaporator bay, my current one is located behind the tag axle on the passenger side and that cord is warm, if not hot when I extend it after driving.
-
Very accurate and wise post Hugh. Amen.
Bill S.
-
The bus is not large enough for people not to see you going to the loo. Were you afraid of somebody walking in on you while you take a pee? (Sitting down, I hope!)? The only lock I am concerned about is the front door lock and even that is unlocked most of the time, even at night. Anyway, locks can befinicky. I have had a slightly similar problem with the handle for the trash can. It worked just fine until some screws started to get lose (how?). All of a sudden the drawer pullhandle started to lock-up and it became almost impossible to open the drawer. Had to take the whole front of and redrill holes because screws were evidentally binding, causing the locking mechanism to stop working properly.
-
Ok..1.so on inverted power you have no power anywhere that you know of with the exceptio of the refer
2. On shore or gen you are good with power
3. Now you are seeing additional 24v circuits not respond correctly, that are DC powered.
If I have that correct you need to look to the house batteries…How old are they and what brand batteries were installed…..
-
This morning as I was fueling up, Detroit off, saw the lighted switches in the bathroom (probably all of them) flicker off and on again, say one to two second cycle. As you all know Elegant Lady has lighted push button switches in the house that are 24 volts. So while driving today thought that while the house batteries are full, maybe there is a bad connection between the batteries and the inverters such that the inverters cannot suck all the voltage out of the batteries that it would like to make 110 volts. This 24 volt flicker is a first time phenom.
When on shore power or generator power, 110 everywhere is normal. As we drove 6 hours today, the oem frig stayed on and all the outlets stayed off. Thought for sure we would fry the frig, but no. Control panel voltages continued to show mid 90’s on leg one and 33 on leg two when driving and genny not on.
Jeff: Ok to run Detroit and Kubota same time, got it. Checked the two breakers on the front of each inverter, all ok. Will get back to you on the microwave/outlet test.
Tom: I checked voltages at all outlets with a meter. On inverter they are zero, and on shore power and genny they are 110. The frig outlet must be inaccessible so I have not metered it, but it still runs from all sources. When we got into Denver couple hours ago I did shut off the inverters at the remotes, and shut off charger one and charger two at the control panel, went outside and cleaned a sulfated house battery post. Started inverters back up, no change. I left my notes on how to shut down the house at home, which I needed when installing new house and chassis batteries a few years ago. So I did not do that.
Barb said the tivoli lights flickered recently too when she was making the bed, not today. I think there is a weak 24 volt connection somewhere. Feel free to call me at 847-894-3868. Thank you.
-
Being that our previous bus was a CC XLV with their version of OTR and our present bus is an H with Prevo OTR, I’ll jump in here. The CC was adequate with the combo of roof airs and extra compressors for front and rear with the York compressors being a weak link. But it certainly was no match for the Prevo OTR…we like being able to dry age our steaks while going down the road…I’ll take overkill over adequate any day. Geo.
-
You know Jon, there has been this invention called, insulation, that decreases the need for massive amounts of HVAC in the summer. Coaches that have it do not need ten million tons of air conditioning to keep them cool. They put quite a lot of it in Country Coaches, so we do not need a gi-normous OTR compressor to cool the bus like a meat locker.
-
You can as long as you can stay comfortable where you are….
-
I’ve only had Direct TV, but I’ve been satisfied with their service.
Since I don’t have an HD satellite, I only get their second to lowest package since I wouldn’t get a number of their channels which are only broadcast in HD.