Tim
Forum Replies Created
-
We have a Citgo convenience store/gas station/Dairy Queen with four truck pumps in back (including off road) right on our way to southbound I-43; its an easy in and out as we head to the Interstate to go south. I always see someone pumping diesel there, all the contractors use it, so I presume they move enough product to have “good fuel”. We have Love’s an hour to the south in Oak Creek on I-94. The Citgo often has diesel credit card price for a few cents less than the net Love’s price, so I’ll stop there and use my credit card for the 1% rewards points and not pay for it for a a few weeks to a month or more. Otherwise we stop at Love’s.
We stopped at the new Love’s on I-43 just south of Sheboygan Sunday, filled up, and weighed with full water and tools. The fuel lanes actually had a 24″ white line indicating where the truck should pull up to after filling up. Great idea. A couple of times I’ve had to toot the horn when a semi with a long sleeper doesn’t get far enough forward to get the bus to the pump.
We were somewhere in Kentucky I think this spring and there was a semi second in line for the pump. Trucker had locked his keys in the cab. It was there when we pulled in, waited for two trucks ahead of us, and it was there when we pulled out and headed for the highway. Bad day for that guy!
We’ve looked at “local” off highway stations for diesel. But I’m always a little leery of whether or not the canopy is high enough.
I like the Love’s card. Use it as much as possible. We DO NOT use it in Indiana. We avoid buying fuel in Indiana.
-
I still go inside to get my receipt for tax reasons and, sometimes, cash-back … but I use it all the time!
-
Interesting… I went to the Wash Wax All site and watched the videos pertaining to cars and motorhomes. The washing/waxing parts seemed pretty straight forward. I’m sure there are some nuances you learn as you go along, but it all seems easy to follow and understand. That is until I got to the video about cleaning the wheels, that’s when things really went off the rails!I compleatly agree with Jon’s earlier comment on the importance of keeping the wheels looking good. That’s why I was concerned when the Wash Wax All video turned ugly when it got to the wheels. Showing a drill with a cleaning pad on the end! Are you kidding thee? Whatever gets in my hand ends up becoming a hammer and a electrical appliance? Oh my golly!
For those who have this system and have used it to clean the wheels. Do you really need to clean your wheels with a drill or can you in fact get good results by using your hands only? I’m not sure my wife would let me leave the house with a drill?
Please tell me this “wheel cleaning” video was done by a crazy person!
Harry
-
The convenience of the Loves card cannot be beat…when Jon and Tom were first thinking about it, I remember telling them that I would pay .10 more per gal. just to not have to go inside once much less twice. That still stands. Geo.
-
OH YA,…..
The check engine lite comes on and stays on, the CLS warning shows and I hit
the menu button and it clears for 100m then its on the Pro Driver again. Temps never high,coolant level never low……its the sensor and will taks Jon’s advise and carry some with me soon!
Jonathan
-
Per & Tim,
You should have an A/C Select switch that allows you to switch between the Salon and Galley A/C when using the inverters.
Lets start a new thread in HVAC to continue this topic.
-
Mark.
Our problem with running the ACs off the inverters is that the two inverters that work that way are the galley and the bedroom unit. If we want to run just two ACs, the ones we would want are the salon and the cockpit ACs, so we end up running the generator like we did in our last coach. With an older coach with ACs that sometimes act up, I just liked having the OTR as a second system. We actually run the generator with CruiseAirs most of the time, since that allows us to have AC when we stop enroute.P.S. We are camped out at Ruidoso Motorcoach Ranch for 5 days. Have you and Craig been here yet? No polar bears here, so Craig has to come up with a black bear joke!
P.S.S. Margrit says hello to you guys!
-
I’ve used Wash Wax All for several years now. Easy to apply and wipe off. An amazing mirror finish. I use it on the windows too.
Get it at. Washwax.com. I bought the the $199 kit a few years ago. The extention microfiber applicator is very high quality and easy to use. When I get low I order another gallon. Polish All is superb also. But, I always wash with soap and water first. There’s no water where I store the bus but a close-by campground charges $5 to use a site to dump, fill with water and wash.
-
Arizona has separate fuel prices for diesel in car/RV island vs truck island, too
-
Throttling back the valves with the intent to limit HW temp appears to me to be totally dependent on two things. First you have to insure the flow is slow enough to insure the heat loss in the lines to and at the heater is just right to regulate the water temp in the heater. Then you have to consider how and when you use water from the heater. My point is that if the water temp is in fact limited using the valves you are very lucky.
It blows my mind that converters that use the Raritan HW tanks do not add a second thermostat that controls a solenoid valve so regardless of if the water is heated with the electric element or engine coolant that it will be limited to the same temp. It was bad enough with water heated by the 180 degree coolant from the 8V92, but the 205 degree coolant from later model engines brings the HW temps up to a very dangerous level.
-
Finally, spending the day with the coach, and finally got the second mini airbag changed. The bolt on top of the
airbag is really hard to access. I used a quarter inch drive ratchet with a swivel extension. There is no
room to turn the bolt, but I finally figured out if I removed the nut on the bottom of the airbag and turned the
airbag itself while holding the bolt with the rachet I could remove it. The threads on the airbag are plastic, and only
keep the bag centered, so it worked. Reversed the process for the install of the new airbag. One leak down.
-
Tom or Lifeline can probably answer the possible reason for the temperatures you experience, but I am guessing the most accurate answer will need a diagram of how the batteries are arranged and how the cables are attached relative to the inverters.
My guess which is worth nothing is if you are in float that is a good sign, but without knowing how long it took to get there and what the loads were and the charging current settings makes it difficult to be sure of anything.
I have a 5 year schedule and my criteria for supporting my choice of when to replace has always been how long I could go before my batteries were in need of recharging. For example, when new we can shut off the generator for the night at 10:00 and with my refrigerator, aux compressor, TVs and phantom loads I can still be showing 25V at 6:00 AM. We can watch some TV, I can work on the computer, we can make coffee and have lights on and I don’t need to start the generator or the coach because we will be above 24.5 volts for a couple of hours.
But as they approach 5 years after 8 hours I am down to 24.5 volts and if I want to make coffee or watch TV I will start the generator. I do not believe in the deep discharges that occur with autostart, so depending on how you use your coach, your tolerance for deep discharges, etc. you may feel comfortable stretching your battery life, but for me I would be six months away from a new set.
-
I have a 2017 GMC YukonXL Denali that I tow. This truck proved to be a big pain to get to set up for towing.
Our prior Suburban was much easier. This was my work around for having to remove the negative terminal when towing.
I installed a Roadmaster Battery disconnect #766 that installed nicely under the hood, so I could remotely disconnect the battery while sitting in the drivers seat. I mounted the relay on the air cleaner top. now there is no need for wrenches everytime you needed to remove the negative terminal. I placed the remote switch on the left lower dash as it was easy to run the wires through the firewall in the hood release grommet.
I have a M & G brake system and have this hard wired to the battery by placing the negative lead from the M & G to the battery neg terminal connection on the Roadmaster relay. so the M & G stays on all the time I tow even though no power to the vehicle.
The back lights/turn signals hard wired to coach via 6 pin trailer plug, and diodes in the back wires to the LED lights.
Then the problem of turning the truck off and losing seat pre-sets, radio, etc… Diane Byrd on this site had posted about using a 9 volt battery plugged into your accessory cigarette lighter to support the electronics. In my particular truck the 12 volt plug between the seats was not live when the truck was turned off. In order to make back feed to the electronics when the truck was turned off, you have to move a 50AMP fuse that is located on the left upper dash fuse panel when you open the drivers door. You take the 50AMP fuse from slot 5, and move it to slot 6. It is just to the right of slot 5. Then when you tow, get a 9volt battery to 12 volt cigarette plug in, and plug this into the accessory 12 volt plug in the center console. (available on amazon) I have had on occasion towed for over 2 days and have had the 9 volt go dead. I only lose seat presets, and the A/C temp goes to 32 F and get an ICE warning. You also have to reset the drivers and passenger window auto up feature by just rolling window down, and up. I have yet to lose the radio presents.
My truck has the remote keyless entry which caused more issues. The owners manual for 4 down towing is completely wrong.
REMEMBER , THIS IS THE PROCESS IF YOU HAVE REMOTE KEYLESS ENTRY !!!
This is the process that works for me:
To Hitch up:
1. Pull truck up to back of coach, apply parking brake
2. attach tow bar, air line, trailer plug cable, safety cables , and breakaway line
3. with truck runnig, Shift transmission column shifter to neutral.
4. Turn tranfer case knob clockwise until the rotation stops, and hold in that position for 10 seconds min, and the neutral light on the knob will blink. Info screen on the dash will report the shifting of the transfer case.
5. Verify that the transfer case is in neutral by shifting the column shifter to drive and reverse. there should be no motion of the truck. leave the column shifter in the drive position.
6. Shut off radio, AC, auto lights. Plug 9 volt battery into the cigarette lighter in center console.
7. Keep door shut and turn off the truck at the push button starter button on dash.
8. turn off truck battery at the remote switch. (Roadmater relay to battery)
9. Place column shifter into park. check steering wheel to make sure it is not locked by turning back and forth.
10. release parking brake !!!!!!!!!!!!
11. exit truck, lock with key as the remote will not do this.
The Un-Hitch process
1. open truck with key, set parking brake.
2. turn on battery back on at remote switch. Remove the 9 volt battery from center console.
3. DO NOT PUT FOOT ON BRAKE PEDAL. Push and hold dash starter button down for at least 15 seconds minimum. ( this will allow the transfer case to operate without the engine running) release starter button. Center screen and dash screen will come back up.
4. place column shifter into neutral.
5. shift transfer case to 2High position by rotating knob counter clockwise. Tranfer case will shift and notice will be given on dash screen when shift has occured.
6. start engine, shift column shifter into reverse, drive, and transmission should engage and give motion,. Shift column shifter into park.
7. reset drivers seat, window auto close if indicated.
8. Turn off truck
9. Disconnect from coach tow bar and all lines.
10. Release parking brake and truck is ready to hit the road and give off a nice rubber smell for a while.
(note: If you follow the direction in the manual and start up the truck , and try to get from neutral to 2H, the transfer case will grind, Not at happy sound !! by not placing foot on brake, and depressing the switch the electronics go into a “Service Mode” thus allowing the transfer case to shift without engine running)
I have towed the Yukon about 6,000 miles so far since I got her, and she tows like a champ. Mileage is not accrued , and M & G is awesome for the convience of use.
-
When he or she unhooked the negative/ground Cable at the battery, won’t that kill the clock and anything else that’s using some low level amount of power to run? Upon reconnecting the battery won’t the user need to reset the clock? Maybe the radio stations? Or is all of that in some kind of none volitile memory?
A heavy duty racing battery disconnect switch from Longacre wired into big ground/negative wire etween the battery and chassis should get the job done.
-
Yes motor is 24 volt….
1. Verify ignition key is off, it has a ignition over-ride
2. Box is in bus air bay passenger side
3. Unit should have a breaker at the top of the box on the left
4. With a voltmeter verify you have 24 volts at the batteries
5. If batteries not charged verify fuses In the blue box on the left if you open it up (4 screws) you will see the charge board and depending on unit will have either 1 or 2 fuses on that
6. On the outside of the blue box is the connections. You will see it labeled motor, you can check voltage using the manual motor only switch…If power going out and none at the motor than more than likely is the arm.