Peter
Forum Replies Created
-
I knew I wanted to take care of my first Prevost the right way. I found it, spent two days going over the systems and had a pre-inspection done. All looked good. First thing was a stop at Jeff’s. New Norgrens, airbags, fluids and filters, generator service, Webastco service, new aux air tank…..Done. Next, new shocks with Koni’s on the front…..Done. Last would be brake cylinders and I would be pretty much there. Little did I suspect I needed to zero out the engine LOL!
Was at DD today to see the progress and weep. The summary so far (that I can remember)
- new head and gasket
- new sleeves
- Counter bore all cylinders
- New Pistons rings etc
- Machine the block
- New bearings all around
- New injectors (since it’s open and the cost to pull the engine alone is $2-3000 if one is bad)
- New A/C compressor (Large dye stain. I had been having frequent A/C light on the dash)
- New belts and hoses (get everything new at the same time)
- Replace the “blue” turbo hoses with high temp red
- All new fluids, told me today that they would make sure it had all new coolant. How generous
All this for a cool almost $20,000! I’d love to get rid of the damn thing but now I figure I essentially have an almost new rebuilt engine…..the ultimate zero out. At least I am seeing the end in sight. Peter, your advice when I met you at Jeff’s last fall rings true. Take the time and money to get your coach up to snuff and then keep it in top shape. Then you will know what you have rather than starting another unknown project with another coach.Sorry for the rant, just frustrated and a little lighter in the wallet than I had expected after trying to be very detailed about the pre-purchase eval. I’m going to teach the part of the next seminar titled, “What? Are you %#^* me!” haha
I’ll upload a few pictures from today when I figure it out. As usual thanks to Jeff for his advice and help.
Chris
-
No rear stop switch? Most have rear start/stop controls.
-
Thanks Jack and Tom, I never knew that the inverter output was was figured in converted DCV. That makes now, since I was getting some high amp readings.
-
Yes that’s a good idea Jon , I am in some dusty conditions so I just change it
-
Peter
MemberJuly 28, 2015 at 7:10 am in reply to: PC Really No Rally – Air & Coach Concours Nov 2015You heard it folks………Lets get as many PC members to show up as possible. It won’t get any better than this. Coaches, cars and planes.
And don’t forget the free dues.
-
Dale I think what people are saying is try to get these things fixed for your safety and others, Dale my bus goes down the road from the first of March to the end of November every week I work four days drive two days rest one day , I know how hard it is to keep bus rolling but you are not that far from Jeff’s he can do all of it on your bus the house part and the prevost part , he is the best in the business , I have to work on my bus sometimes during the week on my day off ,but I want to be safe , I have had a prevost since I was 25 years old , if my bus does not roll down the road I do not make money ,I think you are in the same boat, I don’t think anybody cares how old the bus is or thinks it’s not a good bus because it’s older , they just want everybody to be safe and others , I have had older buses too and they where all in top shape , because I wanted them to be ,
I think Dale we all want you to be safe and anybody else, I don’t think you should take it the wrong way buddy these people just want you to be safe and all others on the road
-
I was there today, just stopped to say hi and ask a question. I could have been in by Friday, that is how far out they are as of today.
You make your own problems. Park the damn bus until you get it fixed so it is safe to be on the road. Driving around with an air leak in the brake system is pretty stupid. I don’t care if it is 4:00 AM or not. What happens when someone pulls out in front of you and you can’t stop, or the leak gets bad enough to trip the emergency brakes? Then you are on the side of the road, again. If the “other” shop had it for a week, it obviously sits for more than three days.
How do you pass a DOT anual inspection?
-
pre disc? Any way my local brake supply has what I always need in stock or next day. Also Choo Choo garage on border with Ga has good rep. and great rates. Bob
-
Peter
MemberJuly 27, 2015 at 2:04 pm in reply to: PC Really No Rally – Air & Coach Concours Nov 2015CarlisleBill,
Do you have a pre-purchase ticket to attend with all access pass or something like that for entire event ?
Not coming with bus.
AL
-
I don’t buy for a minute that you have to “put up with this kind of stuff”. Make an appointment at Prevost and get all the things fixed there. I have NEVER had an issue getting an appointment there, and several times have been able to drive in and get a minor repair done without an appointment. You may have to schedule it out a week or two, but you will be able to get in. Have a list prepared and let them know what you need done when you make the appointment…better yet, go in with the list and talk to them face to face.
Stay there and watch what they do and learn something about your bus, so when issues do crop up you are not at a total loss and can better diagnose what the issue is. It will save you time and money in the long run.
-
Mike they will be the rubber hose that supply service brake air to your brakes there is one on each wheel
-
Jon;
Earlier in this thread you said “you might want to give serious consideration to renewing hoses, brake chambers, relay valves, etc”. What hoses would you replace?
Michael
-
That’s good advice Tom. Additionally mine are under a carpeted enclosure in the 3rd bay and are ventilated from underneath the coach.