Jon
Forum Replies Created
-
Nice work, I always struggle with this range, too close to .001″, too close to .005″ oh what to do. What is the Black Bracket, your Wheel cover mount?
-
Jon
MemberApril 10, 2022 at 3:42 pm in reply to: Air leak on push to connect, plus suspension leaksFittings are available anywhere. You just need to select the configuration and the size and type of fittings (tube or pipe threads)
Push on fittings are a boon to manufacturers because of production time saved but as they age out they become and owner’s nightmare. Personally I have used almost all brands but the Swagelok fittings have been the best by far and now I use nothing else.
If you want to get beneath the coach make sure you block it under the chassis support points with solid blocking, jack stands or some other rigid support adequate for the work. With the coach raised all the way up you can slide into the areas between wheels which is where a great number of fittings are found.
Should you choose to let a shop repair or replace leaky fittings you may need a second mortgage on your home. It is time consuming, fussy, endless work and will still find you with leaks unless you have nothing better to do except chase leaks.
Good luck. We’ve all faced this problem.
With respect to leaks in the suspension and no apparent leaks despite an abundance of spraying soapy water there are two points to be aware of. First and foremost an air bag can have a serious leak you cannot detect unless you isolate the air bag, pressurize it and detect pressure loss. The way the air bags are made and supported a leak in the area of the bottom “can” will leak into the area hidden by the “piston”, the part the air bag rolls over as it is deflated. Air from the air bag or “can” leak can escape undetected where the plastic piston sits on the support plate or even through the holes in the support plate where the “can” is bolted.
The second point is an air bag leak that goes past the 5 port Norgren valve that is supposed to lock air in the bag with the key off can be found leaking from the three port valve in the steer compartment. That valve is where you will hear air escape when you manually lower the bus (or deflate the air bags.) That valve in the steer compartment is often overlooked.
-
Every coach has a build sheet, but I have never seen a MSRP if you mean like a window sticker on a car. Have you contacted Prevost? Wouldn’t that be where to start?
-
Are you asking about the cost of a shell in 87?
-
Lately my DP is reporting 10 MPG. I am now at 7500 miles on the coach since I bought it.
How do we determine if this is a problem of what components as no one reports a MPG of 10 MPG.
Is the computer actually measuring fuel as it reports gallons used and miles traveled. The numbers reported support the 10 MPG.
Thoughts?
-
Is this the one youre looking for?
How is the rebuild coming along?
-
Don, very nice job, what did you used for heat/sound barrier?
-
Yes. But be sure to read in text, “no diesel generators will be affected by new rules
-
“You can’t enjoy what you don’t have” I may need to swap that for one of my lines “ignorance is bliss”
I do have a plan, getting the ducks in a row.
-
Rudy is the smoky diesel heat go to guy for sure.
-
Installing 50 amp in the storage facility. Thanks for the input.