Jon
Forum Replies Created
-
I assume is the same based on the same part number. Will find out in couple weeks, coach is in Florida.
-
Are you sure Katrina hasn’t been pumping it up for Valentines?
-
So to summarize, on a Liberty not all AC loads go through the inverters, and no loads are dual-fed through a manual bypass or some other type of relay. And the only way to achieve that functionality is via a owner mod.
Did other converters provide a bypass functionality or a dual-src capability? I’m assuming Liberty has a engineering/safety driven reason for never having implemented this functionality.
-
Hello everyone. I wanted to take a moment to share some information with you all regarding some of the forum posts we’ve seen.
1. Mirror Vibration-All components or change in components have to be approved for use by Prevost before they can be implemented on their parts. While a motor change was suggested by Ramco several years ago, no approval was given. This summer due to supply chain issues, the original motor used was not available for an unknown period of time. This caused Ramco to forcibly implement use of a stronger screw drive motor in order to keep their production orders moving out the door. The screw drive motor offers significantly improved stability in comparison to the older gear drive motors.
2. Chrome Plating Issues-While it has been stated that Ramco does not use copper during the chroming process, that statement is false. The parts are first plated in copper, then nickel and finally, a layer of chrome. The cause of the peeling issue is more related to the actual aluminum castings. The arms and mounts are sand casted aluminum which is more prone to porosity and off-gassing. The gassed trapped in the casting can be released at any given time, thus causing bubbles under the chrome which later break to allow moisture to enter between the chrome plating layers and the casting.
Feel free to reply with any other questions and we will try our best to respond in a timely manner. Have a great day!
-
Yes, that is the one. if you are just touching up you can use that, larger areas you might want to mix in some ceramic beads.
-
Thanks Jon,
Are you referring to the led light above each relay or to a group of lights?
I think I only gave one light that comes on but it doesn’t blink. Will try again.
Also, I’m still looking for the electrical diagram. Have tried Liberty but they don’t have it going to our coach.
Thanks,
Nick
-
Don,
Where did you get your cargo lights from? I can’t seem to find those. Hoping I can do all 14 for less than the $50/ea options.
The LED festoon bulbs I have now flicker. I wish I could find a good bulb as my housings and rubbers are in great shape. These are what I bought, rated 9-30V. They have good reviews but all for 12V applications.
-
I believe they are powered via the Allen Bradley PLC system. Open the electric bay and look to the rear and notice the red LED lights. Have someone alternately turn the light switch on and off while you look at that light panel.
It might be one of those tiny relays is bad and if so the LED that is flashing on and off will show you which relay is bad. If that is the case swap with another, or better yet if you have a spare replace it.
Report back so other Liberty owners can use this advise or ignore my future posts.
-
I have a good friend in northern MN that works for a data/low voltage electrical contractor. He told me a cute problem that a customer had with a camera system that they bought from another vendor that was a solar only system. It would work fairly well during the summer when there was sunlight fairly often, but was crapping out this winter. My buddy had told them not to buy it as it likely would not work in northern MN in the winter, but they did it anyway. Now they want him to “make it work”. He told then to buy a bunch of batteries, charge them in the office and swap them out every day and it “might” work better. They don’t want to do that and just want him to “make it work”. Last time I talked to him it was still dead as there had been heavy clouds for over a week. He told them there was no fix to it and they should get something else. Still waiting to see how that turns out.
Some of the brain dead politicians have already started thinking about the lack of tax paid by the Duracell cars and are trying to come up with an extra tax on all miles driven by each vehicle you own to make up for it (and then some) from what I have read so far. Proof you can’t fix stupid.
-
Mark: If you can’t recharge an EV with a 20kw generator with a 50amp buddy plug, then many houses don’t and won’t have enough remaining capacity in their electric service to successfully charge an EV … let alone TWO EVs, an electric lawn mower, and an electric snow blower.
-
Good work Don. Thanks for the detailed photos and explanation, feels like I was there.
-
just finished doing this on 1997 XL marathon. No way would I want to do this without getting access thru bedroom. Not familiar with the H and valve cover to closet. Marathon had a removable section of the engine closeout but i had to remove the dresser drawers and dresser framework first. Now that I have done it, I could do it in less than an hour.
The valve adjustments are fairly easy, the injectors need more care to make sure you have caliper in correct place. I would recommend spending the few dollars to order the feeler gages and injector height tool.
-
Alex,
I had mine done at Prevost Nashville earlier this year. They had to slide out the motor, but no big deal. I didn’t think I needed it, but it made a noticeable improvement in smoothness at idle and seems to run better overall.
Sliding the motor out is really no big deal.
-
Having had both, I prefer the Blue Ox. We have had it serviced and serviced it ourselves as well as replacing them every 100-150K miles. Never failed, just seemed like a safety issue. The latest unit we have simply never binds even when the towed is not nice and straight behind us. Service only requires sliding the boots back, cleaning well with WD40 and then cleaning away the WD40 with dry silicone spray. Reattach the boots and you are good to for several years. We had had our new tow bar for 3 years and having felt any kind of binding that would make me think I needed to do it again.
Do they make a base plate for the new Jeep? What does that beast weigh?