Forum Replies Created

Page 6 of 13
  • John

    Member
    September 10, 2014 at 11:03 am in reply to: Generator Stack

    Thanks to all. Will do some surgery to the Gen-turi with PVC and a 3″ exhaust elbow.

  • John

    Member
    September 10, 2014 at 9:58 am in reply to: HI PS

    I was only able to purchase 3 fans as they were surplus and the seller sold all of them,they work great and really cool much better.

  • John

    Member
    September 7, 2014 at 3:41 pm in reply to: Drive off a Cliff Caliber Stinky Toilet

    All good advise, p-traps (especially the washer/dryer) or vacuum breaker. With the bus closed up, run the exhaust fan and sniff all the drains, you’ll find it. Also, if you may have a toilet bowl with a vent hole below the rim that has a mini p-trap that now doesn’t have any water in it.

  • John

    Member
    September 6, 2014 at 12:44 am in reply to: OKC Bus washing??

    I’m sure your wheels will be coated but after what your paying I would tell Frank to put chrome on. I have polished way to many Alcoas in my years and I don’t want to do it anymore, even polishing the plastic is a pain.I went chrome almost 2 years ago and will never go back.

    Later

    bv

  • John

    Member
    September 5, 2014 at 4:42 pm in reply to: This video could save your life

    Nothing political here……….we are talking about insurance for our coaches.

  • John

    Member
    September 5, 2014 at 4:40 pm in reply to: WELCOME NEW MEMBERS

    And PC also underwrites the bus detailing provided free of charge by Al when PC members stop and visit at Big Al’s bus storage and repair service in KC.

    Contact Al to set up an appointment.

  • John

    Member
    September 4, 2014 at 2:27 pm in reply to: WELCOME NEW MEMBERS

    Good job everybody, I am in Richmond VA near DC just got here pretty drive 600 miles from Ann Arbor MI

  • John

    Member
    September 4, 2014 at 1:52 pm in reply to: WELCOME NEW MEMBERS

    David, I know that but the one we use is right up on our admin page where I review new applications. We have such a line up now I am sure the ease with which I can use just a click or two to verify some things is worth far more to me than the extra time needed to access another IP address site. When the rush is over (and it will be) things will get back to normal.

  • John

    Member
    September 4, 2014 at 10:19 am in reply to: Roof air repair replace

    We replaced the 20 year old front Penguin 2 years ago with a new Penguin. The hardest part is getting the units on and off the roof as they are heavy! I know need to replace the bedroom unit because the fan will run but if I try to switch it to cool the Low Power light comes on and it shuts down. I think in the long run it will be cheaper to replace than try to have it repaired.

    One thing to remember in replacing the older units and upgrading the thermostat is if you are unable to run a new cable and have to use the old style cable an adapter has to be used to allow the new thermostat to work.

    I need to call Tradewinds for a price myself!!!

  • John

    Member
    September 3, 2014 at 9:39 am in reply to: Front Tire Wear?

    Here Here, Jon. I have a RAM 1500 with the “special ordered” manual transmission, roll up windows, unheated cloth bench seat, no plug for my I-Pod, alas it does have power steering because it is 4X4. That said, transmission to neutral, parkng brake off and away you go. No unusual tire wear at all, course do to the slight additional height of the vehicle, the tow bar is dead level.

  • John

    Member
    September 3, 2014 at 8:26 am in reply to: Curious!

    Andy,

    For you we will make the exception. Everybody else will have to be content with monopoly money.

  • John

    Member
    September 2, 2014 at 9:45 pm in reply to: Prevost selling questions

    I agree. I think the coach looks great. When I bought my Vantare the seller had a 15 page build sheet available for me to download. This gave me lots of detail to look at and to whet my appetite and build anticipation! If you have a build sheet I’d suggest scanning it into a pdf and putting it on your website. The other thing to do is what you’re doing right now. You’re drawing attention to your coach. Why not post a thread or bump a thread once in a while giving us more detail on your coach. Many times the buyer is right here on PC. By all means, have Prevost inspect the skin, then bump the thread again with the good news! Good luck! She’s a beaut!

  • John

    Member
    February 6, 2014 at 10:04 pm in reply to: Emerald Coach – Press Release

    “All X’s are on the entertainer platform.” We heard this at the All Prevost Show in Tampa in 2013. I wondered if Prevost would actually go forward with that strategy.

    “Rear axle pushed back about 18 inches thus enlarging the bays and claimed smoother ride. Emerald bus weight is 49000 lbs without personal gear, ” What does that do to the center of gravity and front axle weight? Doesn’t that move backward of the rear axle move weight onto the front axle? What happens to the turning radius? Its bigger … right?

    “closets containing floor to ceiling audio gear are now moved to an outside double enclosed lower bay.” With today’s more advanced audio gear, are they still putting voluminous audio gear in the coaches?

  • John

    Member
    January 9, 2014 at 11:34 am in reply to: Liberty Ceiling panels

    Yes, the header was cut in place, not the easiest thing to do. When I spoke to Liberty I talked to the guy that actually installed the ceilings. When he got done explaining how they are constructed he had me convinced.

  • John

    Member
    January 5, 2014 at 9:14 pm in reply to: outside the box ???

    Bob I put in tecma toilet it’s great had one in other coach for 8 years not one problem but I think you need at least 35 psi water pressure and at least 3.5 gals a min for it to work right when you flush it , it has timer to fill bowl if there is not enough water flow it won’t fill it to the right water level don’t ask how I know that experience besause I ******* screwed up 4 years ago one time when I put new water pumps in not big enough but you should check specs don’t trust my word……..

Page 6 of 13