Forum Replies Created

Page 61 of 76
  • Jim/Chris

    Member
    March 22, 2014 at 6:22 pm in reply to: Bras, Shields, and Protective Coatings

    Jon, I could have given you my Plastic Bug Shield. It was easier to fool with than a bra.

  • Jim/Chris

    Member
    March 22, 2014 at 3:25 pm in reply to: R-22 no longer available?

    I

    I am in the HVAC business I can assure you R22 is available and will be available for the foreseeable future. It has gone through tremendous volatility in pricing over the last couple of years but has settled and even come down in price most recently. It is against the law to produce equipment with R22 in it, so the manufactures have gone to a replacement unit that is shipped dry. Most HVAC equipment today is built with R410A branded by carries as Puron many years ago. R22 is being phased out and it will continue to raise in price as production continues to be reduced and reclaimed refrigerant becomes less available.

  • Jim/Chris

    Member
    March 17, 2014 at 7:24 pm in reply to: Metal strips and Hardwood Floor Install Issue

    thanks a lot. Have a nice trip!!

  • Jim/Chris

    Member
    March 13, 2014 at 2:57 pm in reply to: More homebuilt H3 photos

    Holy Crap, WOW, is the only word. Beautiful!! you need to change your signature, your coach is NOT ?Bling impaired” Now! Wonderful

    Who did the paint work?

  • Jim/Chris

    Member
    March 13, 2014 at 9:11 am in reply to: Leaking air regulator valve

    I agree Jon I myself change the dryer filter every 15,000 miles that’s just me and drain the tanks every two weeks sometimes every week

  • Jim/Chris

    Member
    March 7, 2014 at 10:34 pm in reply to: House Battery vs Inverter Output

    Charles, 2 1/2 days is really good. I’m guessing you switched to LED ceiling lights. Did you by chance see what voltage activated your autostart?

  • Jim/Chris

    Member
    March 7, 2014 at 10:24 pm in reply to: MCD on elecronic dashboard 03 CCoach Prevost

    SilverLeaf’s VMSpc is $350, as I recall. It does much more than a DDEC reader. So, you don’t need a CC to take advantage of its value. It worked great on my CAT powered Beaver.

  • Jim/Chris

    Member
    March 6, 2014 at 6:34 pm in reply to: low air brake pressure

    Air dryer

    Pressure governor

    Get gunk out of tanks if air dryer has never been serviced..they are likey full of water and debris

    Check unloader valves in compressor if none of the above work

  • Jim/Chris

    Member
    March 6, 2014 at 7:46 am in reply to: AM Radio

    Greg, I think you said both old and new radios don’t work well. If so, I would looking at the antenna. As already stated, installations in fiberglass can be problematic. The antenna should and is likely on the roof. This to prevent metal shell interference of a side mount. The antenna needs a ground plane to be most effective. Typically, this comes from the sheet metal the antenna is metallically mounted to. If mounted to fiberglass or not metallically bonded to metal, you can help fix this. If you can access the bottom of the antenna and remove the antenna you can add a sheet metal plate under the antenna that it would mount to. The plate should then have an old fashion braided ground strap attached to it and the coaches shell to make the shell part of the ground plane.

    You could also have a FM antenna, which would be no surprise. An AM antenna will be much longer than a FM antenna.

  • Jim/Chris

    Member
    February 11, 2014 at 6:44 am in reply to: Fireplace

    Amen to that. The fake fireplaces are part of the option package that includes Chinese lanterns for the awnings and a map of the US to show the states visited. As incentive to buy that option it includes the bumper sticker that says “We are spending our children’s inheritance”.

  • Jim/Chris

    Member
    February 10, 2014 at 8:41 am in reply to: Webasto inop

    Tom, no webasto problems….toad wiring problem. Could you please call me when you can(don’t have your no. with us). Still at Everglades. Geo 941 779 5018

  • Jim/Chris

    Member
    February 6, 2014 at 8:59 pm in reply to: utah

    Hey Tom have you figured out your itenerary yet (did I spell that right ?) Maybe we could hook up somewhere along the way.

  • Jim/Chris

    Member
    February 6, 2014 at 9:39 am in reply to: Coach drops to ground after leveled

    Thanks for the invite Peter, might take you up on it when it warms up. Heck we have a dusting of snow on the ground here 100 miles north of Port O’Connor (Gulf) Yeah these leaks are a pita for sure. My air gauges don’t drop to zero for a couple weeks but coach does. I guess that why some of the converters put air compressors on board and tied in.

  • Jim/Chris

    Member
    February 3, 2014 at 10:11 pm in reply to: Engine size upgrade

    Again, I appreciate everyone’s feedback.

    I have to say that when I mentioned ‘Newell’, you would have have thought I threw hot lava on the Prevost folks. I didn’t mean to start a ruckus! I’m just making comparisons so that I can get the coach that fits us best.

    I’m not a ‘long-haul’ driver and a ‘trailer-park-queen’ would not be a bad thing whether it’s a Prevost or a Newell.

    MM.

  • Jim/Chris

    Member
    February 3, 2014 at 9:32 pm in reply to: Engine size upgrade

    I don’t have a dog in this fight, but I will share a short story.

    I was headed South on US301 South of Starke and spotted this beautiful Newell on the side of the road. There was a white headed gentleman staring at the rear side of the coach. I stopped to see if he needed help and there was an air line leaking in the engine compartment. We tightened the fitting and he was good to go.

    That Newell had a C-15 Cat 625 HP 2075 Lbs of torque. You could eat off the engine, he was so proud of it. I have to say that is the nicest engine and compartment I have ever seen, it had stainless or chrome everything and was a real work of art.

    Not sure about mileage but I can only imagine how well it ran.

Page 61 of 76