George
-
George replied to the discussion Fan alignment in the forum Chassis 4 months ago
Thanks for the reply been serching for info and this is first reply
-
George started the discussion Fan alignment in the forum Chassis 4 months ago
Looking for details on fan alignment to fan shroud. My fan has part nextending past the shroud and part is running behind the shroud. I am sure there is a position that gives the best airflo for cooling.
-
George replied to the discussion Marathon Hubcap Standoff Bolts in the forum *** General Discussions 4 months ago
Reply to Marathon Hubcap Standoff Bolts
that is a coupling witth thread stock in both ends use a thread gauge and make your own
verify left and right hand thread on both
-
George posted a new classified listing. 8 months ago
Guest PRO ChargerGUEST PRO Dual 10/10 amp charger
-
George started the discussion Rapid air loss in the forum Pneumatic 9 months ago
My primary and secondary air was at 120 after 2 weeks sitting. The aux was at zero.
Started bus to wash. After2 hours pri and sec brake were zero pressure. Aux was at zero.
Cranked bus and built pressure until air dryer exhusted. Pulled into building and watched pressures. The Aux dropped 10 pounds in one quick moment. pressures held for about…
-
George posted an update 10 months ago
What is it like going I 20 TO I 635 in Dallas FtWorth towing F 150
-
The time of day can make a big difference, but LBJ can be bad anytime. Where would you exit 635 ?
-
Google is mapping me this way
I-20 W. Take US-175 W, Texas 183 TEXpress, Texas 121 TEXpress and US-287 N to US-81 N in Montague County.
- View 1 reply
-
-
George posted an update 10 months ago
Today getting bus packed for trip and went to put portable compressor in bus amd could hardley lift it then looked at pressure gauge It was at 120 pls realized how much I was trying to lift. Drained to 0 PSI and able to lift into coach.
-
George replied to the discussion Sealevel tank monitoring system in the forum *** General Discussions 11 months ago
Reply to Sealevel tank monitoring system
IS THERE A WAY TO CONTROL AUTOFILL FOR FRESH WATER TANK
-
George started the discussion Sealevel tank monitoring system in the forum *** General Discussions 11 months ago
Sealevel tank monitoring system
What is your experience and do you use fresh water monitoring with sealevel or what do you use for fresh fill?
-
George started the discussion UGLY fIX in the forum *** General Discussions a year ago
How many people have installed the Ugly Fix on their coach?
What were the results?
Still trying to find search feature of past postings.
-
George started the discussion TOOL BOX SLIDE in the forum *** General Discussions a year ago
i SEE PICTURES OF TOOL BOXES ON A SLIDE BUT CAN’T FIND A SURCE FOR THEM. Please post any info you have on one.
-
George started the discussion PSA in the forum *** General Discussions a year ago
PSA August is a good time to change air in your tires. Heating and cooling makes it musty. When you checkair pressure you can get a whiff of that foul air. Suggest doing in the morning that is when air has most volumn and least heat w
hich you want to avoid adding more heat to your tires.
One comment I saw on another forum was it is a good time…
-
George replied to the discussion First ever death wobble in the forum *** General Discussions a year ago
Reply to First ever death wobble
My 2023 F150 did the dearh wobble more times than I want to count.
Each time I ws doing a left turn from a dead stop.
I was also getting outside edgewear on front tires.
Had my alignment shop set caster to a negative and edge wear stopped.
I also put a clamp on my hitch to eliinate any wobble as a member on forumn suggested.
To date no more wqbble…
-
George replied to the discussion 17.5 KW Powertech Generator Basler Voltage Reg in the forum Generator a year ago
Reply to 17.5 KW Powertech Generator Basler Voltage Reg
They are in mechanicsburg PA
-
George replied to the discussion 17.5 KW Powertech Generator Basler Voltage Reg in the forum Generator a year ago
Reply to 17.5 KW Powertech Generator Basler Voltage Reg
I got a Flight Systems about 3 years ago and it works prefectly. They make a wide range of control boards for many different systems.
Call and they are very responsive.
- Load More