Dick
Forum Replies Created
-
I’m a little surprised with the OP. They have a Liberty, which of course don’t smell. Its SOBs that smell, if not sooner then later. Maybe the OP is “worried” about his coach smelling down the road. Since they might a good choice and bought a Liberty, smelling is something they won’t have to worry about.
-
I use nothing but water, but the bus never sets more than 30 days in between use.
-
Dale,
I periodically hook a 24 volt Battery Tender to my jump lugs and that does the trick.
Hi to Jan….
-
You are funny. That’s a beautiful bus you have Mark Congrats!
-
Peter wrote: “his Dad had the livery stable in town for awhile also”
I can imagine that things were pretty wild and primative back in those days. I haven’t heard reference to a “livery stable” in years and years, probably decades and decades.
-
I had an opportunity to test drive a 2010 Outlaw XL II with LED under frame lighting. It was a nice effect for the coach. Attracted alot of attention when we arrived at a truck stop. Good feature or option.
Reese
-
I actually had the phone with me yesterday, and in fact I had it turned on the entire day.
It never rang, and I never made a call.
-
I’ll add this too… Hopefully they have fixed the roads up there from the winter. I was up there in February and broke a wheel because of all the potholes in the road. Some of them felt like the entire bus could fall in them. But it sure is beautiful up there.
-
One of the things I don’t understand about the two GPS’s we’ve got (older Garmin and now the JVC, I think, navigation system on the coach) is that they don’t appear to automatically switch from one time zone to another and TELL ME what time zone is being displayed. I find that awfully strange and frustrating.
Anyone have a GPS which will do that?
-
Jon,
Please post the utube link and tips. Sou D’s like something I need to know as I also have tank sentry units ( round LEDs)
Thanks
-
Here is a link to the ad on RV Trader, incase anyone is interested.
http://www.rvtrader.com/listing/2003-Country-Coach-LEXA-45-Prevost-114662475
-
Wow Don, do you have to pull that tank every time to check that cruisair? Is that a water tank? Where are the other ones.
If they don’t show, buy you a bottle of 22 and I’ll show you how to hook up and check using gauges and the cruisair chart. Hard to find somebody to work on these around here and have had to learn on mine with an expert (Justin Griffith, Granger Tx.) showing me how.
-
Joe, I found 24V exact matches for the base that have 16 LED’s (it’s nothing more than the old double bubble base that have been used on big rigs for years) and then I have ordered a bunch of Trucklite covers that snap right on to that old base that match the ones we have on our buses(currently on backorder). Problem is, I tried to re-order more lights in the 24V version and my supplier has dicontinued them. But fear not, I have found a little module that will step down 24V to 12V and then you can use any commomly available light that will fit the mounting holes. I have even found some that are grounded through the base of the light like the originals. The only problem that I have not overcome is finding a good spot to spice in my 24v to 12v module It might take more than one of them because it can only accomodate 1amp of draw (10 marker lights or 6 STT, but that will be enough to do one side of the bus markers. I did not find any 24V LED version of the style of lights that are on our bus at Trucklite.
I don’t know what your NAPA store is charging, but the 16LED base is $5.11 each and the lens cover that I get from Trucklite is $7.30 each (part# 9077red & 9077A- amber) You will probably need some small of the rubber compression nuts (I forget what the official name is) because some of them will most likely not allow you to re-tighten them. I have used a small hemostat to hold that dumb wire from slipping back through the hole. They certainly did not splurge on the length of wire going to the side markers.
I have not installed these on my coach yet (no time-still working), but I will have it done before the July seminar.
Feel free to call me at 800-496-6303 during the day. I could use the diversion from work.
-
Unfortunately, I can’t help with that. My valve started leaking a few months back and I was able to keep jiggling it to get it to a spot that wasn’t leaking. If I put it in the closed position it leaked. Maybe you can do that temporarily.
Earlier this year, my air cylinder failed and destroyed two belts before I could get home. It has now been removed and replaced with a heim joint. I much prefer the solid mount to the air cylinder. I don’t have to worry about it failing and not knowing until it tears something up.
-
I
think Geo is making some sense, the least it would do is possibly act
as a deterrent for some moron thinking about screwing with you..