Archived
Forum Replies Created
-
I purchased my last one a NAPA.
-
i think he used thermo tec 14100 Cool it from Xtreme Diesel.
-
I understand your concern Greg. I always carried a 20 ton bottle jack just for problems like this. Jacking up a front tire to just get it off the ground is very easy, then rotate the wheel to see if something is dragging. Just trying to give you some thought on how to get to a repair place without towing.
-
FWIW….Do not fill to hub line.
Fill to low mark and leave sit overnight as oil will slowly travel to back of hub assembly. Check after 24 hours.
-
just started looking. i do have a relay box on the right side of engine compartment. no spare. only turn ,stop,tail,back up. inside the upper has the same wires on a bar. i will search for the brown wires. just thinking some one has done the same thing. and could save some time. thanks.
-
I installed a double shot of propane into the series 60 ,just shy of 800 horse power it will do a burn out about 50 ft .
-
Serviced engine yesterday and all of the isolators looked good, thanks Ed for posting never have enough information.
-
Fellow that does the Camp Prevost channel on YouTube showed his fill up on his last trip for Spring Break with his family. I believe it was ~$945 before the discount.
-
Good thoughts
This might end up with a combination of components.
I appreciate the links.Gary
-
If you are near Nashville Prevost, just around the corner is Bus 4 Sale. They will do the exact same high quality work as Prevost for less than 1/2 what Prevost charges. Just a thought.
-
John-
I’m wondering how your front end rebuild is coming along, and if it is about what you expected in terms of time and effort?
I took my bus to Prevost to have the airbags and shocks replaced, due to my current situation, lack of tools and a place to work on the bus. While walking around under the bus the mechanic showed me other things that need attention. A- arms, (bushings starting to protrude), same with the sway bar bushings, and the steering arms boots were ruptured (leaking grease) and 2 of them had some play as well. Looking at 6K+ just for the labor cost
Soooo… I’m considering doing the work myself. For 6K+ I could replace most of my tools, and if my friend will let me use his place to do the work. I’ve done front end work on trucks, but nothing quite this size. So really wondering what your experience has been?
thanks
-
This might want to be a question folks start asking when trying to get into a Campground. #1 do you have any open spots, #2 do you have GFI receptacles?
-
David
Thanks for your response.
I see several products like your link, certainly a good addition.I’m actually a bit surprised of the low response, seems RV fires are a real deal.
Wireless temp sensors are something I’m learning now. They can be set to notify when it reaches a specific point. To me this would be a simple addition that might catch a fire prior to ignition. As anything – it sounds good but how well will it perform. I’ll purchase a few and post my findings.