Forum Replies Created

Page 108 of 2304
  • Archived

    Member
    October 27, 2020 at 5:31 pm in reply to: WHAT ARE YOU WAITING FOR??????????

    We made a similar 2000 mile trip from Vegas to ETLC in 6 days. Stopped for fuel 3 times. Saved a ton of money ($60-$80 per fill up)!

    We also downloaded the new app which shows you all fuel stops within a 150 miles (would like to see that extended) with the final price and directions to the one you select.

    The app is just the cherry on top of an excellent fuel program.

  • Archived

    Member
    October 27, 2020 at 7:39 am in reply to: Accessing engine with Full closet in rear of Royal

    A coach assembled like George’s needs no special attention for access because the converter did a good job allowing access. An hour of effort to provide access is not unreasonable.

    But other coaches, like mine as an example require about 6 hours, and even requires the removal of an air operated pocket door so there is a high risk potential for cosmetic damage in doing such extensive disassembly (and cost) or a similar risk and cost if the engine has to be slid rearward.

    I am incredibly pleased with being able to gain access with about a minute’s effort. I got incredibly lucky in deciding to have the modification because I made use of it shortly after having it done.

  • Archived

    Member
    October 27, 2020 at 7:34 am in reply to: Michelin tire service verses NTCS

    NTCS is not an advertiser now. If they pay their outstanding bill I am not sure Tom or I would allow their return.

  • Archived

    Member
    October 27, 2020 at 6:47 am in reply to: Michelin tire service verses NTCS

    Unfortunately, my experience with NTCS was not good. It is a long story, but I strongly recommend that you require NTCS to provide a quote in writing before proceeding with the transaction. The final bill was about $500 more than I was quoted for two 365s. Most, but not all, of the additional cost was attributable to labor. When I questioned the bill, Mr. Ward explained that the vendor he selected charged NTCS more labor than Mr. Ward estimated. According to Mr. Ward, the vendor would not reduce the bill, so I had to pay the increased costs. Since Mr. Ward quoted the price, selected the vendor, and arranged for the work without any participation from me, I believed that NTCS should have paid the additional cost.

    The work was performed at Marathon East (the coach was there for service). The vendor claimed that the tire service employees had to wait to get access to the coach, which resulted in additional labor charges. I spoke to some people at Marathon East whom I trust, and they denied the vendor’s allegation. If there was a problem with access, one phone call to me from my “concierge” would have resolved the issue. Again, I was not informed of any access problem, but I had to pay the bill (plus the additional $90 for NTCS “benefits”).

    I used NTCS because it is a PC advertiser. Since Mr. Ward’s initial quote was so competitive, I did not “shop” his price with other tire discount programs. I do not know if NTCS’ “final bill” was competitive. I spent a lot of time trying to persuade Mr. Ward to reduce the bill to the amount he quoted, but he refused to do so. For this reason, I do not recommend NTCS.

  • Archived

    Member
    October 26, 2020 at 9:51 pm in reply to: Accessing engine with Full closet in rear of Royal

    Fortunately accessing my engine is very easy to get access panel out.

    Took 10 minutes to gather tools (Where the heck is the 1/4 inch ratchet)

    another ten minutes to lay protective cloths in coach to protect carpet

    10 minutes to remove drawers and carry to a safe location to protect finish. Wife would put me in engine bay if I scratched the drawer faces.

    19 minutes to remove the 6 bolts holding panel to frame. Old fart with bifocals trying to reach through a drawer opening to remove bolts. Then got to turn around to remove bolts in the other end. Gymnast would do this in 5 minutes

    2 minutes to pull carpet, at this time in the project I’m ready for a scotch on ice and a respirator.

    5 minutes to remove screws in panel and carry to safe keeping. Old fart took 3 minutes to turn around in space between cabinet and bed

    2 minutes to drag cover through cabinet opening onto floor. That things weighs 40 lbs at least feels like a sack of concrete, need to go back to gym I guess.

  • Archived

    Member
    October 26, 2020 at 7:45 pm in reply to: Michelin tire service verses NTCS

    Tom:

    Assuming FET IN means FET included in price noted?

    Jon:

    PC member had good or bad experience ?

    Chuck

  • Archived

    Member
    October 26, 2020 at 7:44 pm in reply to: Michelin tire service verses NTCS

    I believe the tire pricing between the two sources are nearly the same.

    But the personal service of Dave and Wendy Ward is hard to beat. I purchased 8 new Michelin tires from Dave for my new to me coach. It has a tag axle which is new feature to me. Not being experienced in utilizing the tag, I left the tag dump switch ON as I pulled out to escape the path of Laura. When I stepped on the brakes, I flat spotted one of the tag tires.

    While traveling west on I-10, I called Dave sharing my problem. He called me back in 5 minutes stating Brown Truck tires would have a tire waiting on me when I passed them in about 40 minutes. Brown’s charged $25 to mount the new tire.

    Before that I got a call on a Sunday from a Newell owner sharing he was at Buckhorn with a bad 365 and could not leave till he got a new one. He had called all day Friday and Saturday with no one having a tire and stating they could not get one.

    We called Dave on Monday. Dave called me about 30 minutes later sharing he would have a tire there on either Tuesday or Wednesday and a provider to install it.

    So, I am sure either source will be fine but the personal service of the Wards is right up my alley.

    Hope this helps.

  • Archived

    Member
    October 26, 2020 at 7:24 pm in reply to: air ride system problems
    Yes

    Make sure the air dryer for the engine driven air compressor has been serviced recently so it’s NOT introducing water/moisture into the air systems. Same goes for the 110v air compressor. It is very important that it has a good air/water separator filter immediately downstream so as NOT to introduce water/moisture into the aux system.

    Fix the leak(s) asap.

  • Archived

    Member
    October 26, 2020 at 6:23 pm in reply to: Pilots N Paws

    Pilots ‘n Paws made the “one more thing” segment on The Five tonight. Pretty cool! Anyone else catch it?

  • Archived

    Member
    October 26, 2020 at 6:01 pm in reply to: Michelin tire service verses NTCS

    Chuck,

    Here’s the PC Advantage Price

    X Line Energy Z – 315 – 770.58 FET IN

    XZA – 365 – 824.78 FET IN

  • Archived

    Member
    October 26, 2020 at 3:25 pm in reply to: Royale Coach and Generators

    I am checking on this and think I can make the change to that line of code…

  • Archived

    Member
    October 25, 2020 at 5:26 pm in reply to: air ride system problems

    The dash gauges are brakes and there is a means of preventing a leak in the accessory air from depleting brake pressure so you are not looking at the right gauge. If you do not have a gauge for accessories, add one. It is important.

    You solved one problem, not you need to fix the one you have and the starting point is to find that leak. If it leaks as fast as you say it will sound a little like trying to shove a tornado through a keyhole, There will be none of the usual magic to isolate that leak.

  • Archived

    Member
    October 24, 2020 at 8:29 pm in reply to: air ride system problems

    I hope his bus has an “aux” air gauge? My bus didn’t come with one, so added 2, so I would know what is what with the system.

    Crafty b, does your bus have an aux gauge?

  • Archived

    Member
    October 24, 2020 at 4:22 pm in reply to: Window Shade in Marathon

    Thank you, Buddy! Will research this weekend.

  • Archived

    Member
    October 24, 2020 at 3:04 pm in reply to: 02 H3 45 drivers power window problem

    PM sent..

Page 108 of 2304