Tim
Forum Replies Created
-
king Star Board. I’ll check that.
Epoxy paint is exactly what I was going to do. Miy bus has a sheet of aluminum under the power cord drum and the pumps and all the electric valves. I was almost able to get the drawers out but could not until I cut out the steel rack. Oh my Sweet Jesus this is something. Pictures tomorrow might look like I don’t know what’s going on. He he! I don’t but I’m doing it.
-
Jeff has a lot of power outlets because his business has grown to the point where he has a lot of coaches being serviced or scheduled for service. When we have a seminar we have to understand those coaches being serviced and whose owners are not necessarily with the coaches have to have priority.
Those attending the seminar should plan on dry camping and see that as an opportunity to run the generator and load it up as heavily as possible. Our generators never get the exercise they should have to stay healthy so this is a good opportunity to run them long and hard.
Arrive as Tom says with full water, and empty holding tank, along with a full fuel tank and based on the number of coaches that need power Jeff, Tom and I will try to arrive at the fairest method of allocating the available power outlets. If you have to run your generator I doubt if you will use more than 30 or 40 gallons of fuel based on a Friday arrival, Monday departure, and continuous generator operartion and a usage of less than 1/2 gallon per hour. Last diesel price I saw in the Vonore area was $2.15.
-
Hope it all works out for you Bryan and good luck on the sale of your MCI. Just look at it as the next chapter and have fun.
-
I have the same problem Tim. There’s a little micro switch on each door and I think I have one of those that isn’t closing the contact. You access them through the panel on the inside upper door.
-
Bill is right, on an H it is a major operation.
-
Tim
MemberApril 18, 2017 at 1:39 pm in reply to: Is it the Michelin Man..a Marshmallow..or Mr. RoweLooks like the michelin man to me
-
WOW….Tom / Nancy, what a truly new look to your bus.
Somehow I missed this when originally posted…but got it today. I’ve been on this bus many times and seeing the change is neat. Like the new floor along with match to original interior cabinet. Sofa changes interior big time.
Great job, great workmenship… Jeff.
-
We’re newbies to the community and still on a big learning curve. We look forward to the seminars and meeting everyone. Early October is best for us.
-
I was using a different brand of TPMS which had flow through sensors and needed an antenna to be able to read my tag tires. I purchased a Pressure Pro Pluse from Tom and absolutely love it. If all the pressures and temperatures are where they are supposed to be then the display is blank. I’ve been told that there is going to be a software update that will leave the display on all the time. My issue with the the flow through sensors is that the ones I had had a hard time with the valve core in the sensors pushing the tire valve core. It’s just not a big issue for me to remove the sensor to fill the tire.
Tom is a great source to purchase the pressure pro system.
-
I’ve unplugged the relay on the last 2 coaches I’ve owned, and no problems whatsoever.
-
I checked tire prices (Michelin National Acct) this morning for 315 and 365 and your tire price looks about right.
It costs about $350 to do a full PM on a truck & trailer right now. I’m not sure how much more involved the Prevost will be, but our Wanderlodge was about the same cost as our trucks. We serviced it once per year. Most of our trucks are serviced at 25k miles now although many fleets are going longer (35-50k) with the newer oils etc. I’m not sure why it would be necessary to do it more than every 10k miles or annually whichever comes first. Oil and grease are cheap prevention though.
Our brake components last for more than 5 years unless a shoe cracks and we routinely weigh 110k pounds.
We generally have no airbag issues before 10 years. I wonder if some of the early issues with a bus are do to lack of use.Our local diesel shop did our engine, tire and brake service on the lodge. We plan to have them do basic service on the Prevost as well.
-
Jon
i have been reading several threads and I have two questions. Has there been issues in the older Marathons with the Jenn Airei refrigerators? So far mine working good. Does my vintage 1995-6 XLV have the relay that can engage the hi speed fan in the event it is needed on the road? Can not find one in my box. And finally my DDEC readout has just gotten unreadable. Is there a reset or am I looking at something worst? What do you think I should do. Thanks friend. -
Thank you Jon, very good information. I will have the insides of the tires inspected.
Roy
-
Sorry for being awnery. It stems from the stress that I encountered worrying that I had no red hoses on my engine until Jeff Rowe told me 8v92 didn’t need them.
-
What works for me as a replacement schedule might not work for everyone.
As has been mentioned some air bags will serve well for a long time, or they may fail in a short time. Prevost is silent on a replacement schedule for them probably because there is no hard and fast rule regarding their lifespan.
The same holds true for a lot of other components that rely on rubber parts to work properly.
The things that we mention often are brake chambers, air bags, tires, Norgren valves and batteries. But there are numerous other components that can age out such as relay valves as one example, or hoses or belts.
When I picked 10 years as when I want to replace my air bags it was because there were three of us who had failures at around that time in service. Mine had one steel bottom can rust through and it leaked down as a result. Another member had severely cracked air bags where they rolled over the “piston” and as a result he had the leans. The third was one that just burst. All were in the vicinity of 10 years old so that became my standard.
I had a brake chamber diaphragm fail on a 7 year old brake chamber so I picked 5 years as my target replacement age. At about 10 years I had Norgrens starting to leak so I rebuilt them, then shortly after they started leaking again so I just picked 10 years for them.
The tire age is from the web sites of the various tire manufacturers and after last month’s seminar at Michelin I am more convinced than ever that 6 or 7 years is the absolute upper limit. That is reinforced by the fact that if I squeeze more time out of a tire and it fails while driving I not only have a tire ot buy at a very expensive price, I may end up making big dollar repairs to my coach.
My 5 year battery life is the direct result of having a chassis battery set fail at 6 years with no warning so I just picked 5 years and I am cautious about keeping them maintained.
My point is I was influenced by many factors in developing my standards for replacement and since each of us uses coaches differently and has different environmental factors that influence the age of our components we have to set our own schedules. I do know I would rather throw out perfectly good parts than have to deal with trip ending roadside failures.