Forum Replies Created

Page 13 of 15
  • Michael

    Member
    May 26, 2015 at 3:35 pm in reply to: New Tile Floor

    It is tile and was purchased at Lowes. It is not slippery and the dog doesn’t seem to have a problem. It is very easy to keep clean vs. the carpet.

  • Michael

    Member
    May 22, 2015 at 8:43 am in reply to: Alaska Bound


    Peter, we traveled there in 2010 with a plastic coach, and the only section that was rough was the area of Destruction Bay. The road was built on the perma frost, so it is always moving, if you watch for the Orange cones and take it slow, no problems. Of course there is construction, as in the lower fourth eight. It is a life time trip with all of the scenery .

    Larry and Miriam Nelson

    2002 Vision

    2012 Honda CRV

    Hurricane, Utah

  • Michael

    Member
    May 4, 2015 at 9:31 pm in reply to: Cruise Air , Roof Air, & OTR

    You can tell by the pictures of a coach even if you can’t see the engine compartment. The 4th bay door on the curb side will be fully louvered. Geo.

  • Michael

    Member
    May 3, 2015 at 10:59 pm in reply to: low level problem

    We had a similar problem late year. Jon was very helpful in helping me trouble shoot the problem(s). after a few days at Prevost Nashville and the problem not resolved we went to Jeff with ETLC. All was resolved and holding steady. Worth considering if you cannot resolve. Thanks to both Jon and Jeff.

  • Michael

    Member
    May 2, 2015 at 11:22 pm in reply to: Basic Maintenance

    Start with the Craftman 540 piece set of tools, add to it all the large combination wrenches above what is in the set. Add to that a good multi-meter (like a Fluke or a Klein CL1000), a good battery tester (like a Midtronics PBT-200), a case of duct tap, a couple of expandable LED flashlights with a strong magnet on the butt end, a good wire strippers (like a Klein), good wire connector crimper, a large assortment of crimp/solder/heat shrink wire connectors (butt connectors, spade connectors, ring terminals, etc.), large assortment of heat shrink tubing, a heat gun or butane torch, 10 feet of 0.250″ DOT air line, an assortment of 0.25″ DOT compressions fittings, extra ferrals for the DOT compression fittings, a couple of magnets on a stick (short and long sticks), a set of Vise-Grips (small to large), a HUGE assortment of tie wraps (small, medium, good sized), an assortment of gommets, an infrared heat gun, four digital temperature probes, if the 540 tool set doesn’t have an assortment of chisles, punches, and drifts get the Craftsman set, and a tool box to put all this stuff in. That should get you started.

    You’re probably going to need a variable speed cordless drill (I recommend the Craftsman C3 series with Lithium-Ion batteries) along the C3 right angle drill and of course a very comprehensive set of drill bits.

    This sounds like alot of stuff and you’ll likely only need 20% of it, but the problem is you don’t know what you’ll need until you need it.

  • Michael

    Member
    April 23, 2015 at 10:16 pm in reply to: Best IR gun to buy?

    Tom and Bill,

    I ordered ours from the Sears website. It will register temps up to 1,400 degrees….. about a $100 if I remember correctly. When I was shopping, it was hard to find a gun that had the higher temp capability.

    Take care,

    Mark

  • Michael

    Member
    April 17, 2015 at 1:04 pm in reply to: PC Rally Photos – Foley

    Awesome pics Grizz… thanks for posting !!

    Diane

  • Michael

    Member
    April 14, 2015 at 11:17 pm in reply to: Oyster Fest 2015 – A No Rally, Rally

    Diane:

    Glad you are enjoying south LA and our Cajun Food. Height of crawfish season….. I am about 10 miles from you as hope the weather clears as we had enough rain for a while. Safe travels and have a great time at Bella Terra !!!

  • Michael

    Member
    March 27, 2015 at 11:07 pm in reply to: Norgren valves

    Jon, tried your links further up the thread and it shows an error on norgren site…maybe it’s because I am trying to view on my pbone.

    Anyways called Prevost today to order some small things, got quotes on norgrens, 3 ways for $78 of which my bus has 7 and $162 for the two 5 ways did not seem totally unreasonable for something I will only do once…i thought the prices would be much higher!!

    I will investigate Norgren express a bit more before I order.

    FYI, Prevost is having a sale on airbags and shocks. …so spung (hardy har har) for all new airbags and new rear shocks today!

  • Michael

    Member
    March 26, 2015 at 10:20 pm in reply to: Austin, TX, Places to Stay?

    Ditto on Sunset Point. We have stayed there several times. Sits on a solid granite point with nice, level and spacious spots. Very clean and friendly staff. Short drive into Austin with many interesting venues within the surrounding Hill Country.

  • Michael

    Member
    March 24, 2015 at 8:53 pm in reply to: H3 45 Trim moving

    I’ll try that Grizz. thanks

  • Michael

    Member
    March 23, 2015 at 7:08 pm in reply to: Koni Shock Gets Knocked by Steering Arm

    Like Jon said there are no welds on the clamps

  • Michael

    Member
    March 20, 2015 at 6:22 pm in reply to: Oyster Fest 2015 – A No Rally, Rally

    George,

    Don’t you have something to do? Obviously you are distracted.

  • Michael

    Member
    March 19, 2015 at 9:22 pm in reply to: Discount Option For Consideration

    This is just a general comment and applies to all who might provide some type of service for our coaches.

    If you are fussy and have standards or concerns, always remain with the coach and observe the work being performed. If you don’t like what you see, mention it. From my perspective this applies to everything from mechanical repairs to tire changing to washing the coach.

    We cannot complain if someone doing the service does not have the same sense of pride we do.

  • Michael

    Member
    February 26, 2015 at 4:38 pm in reply to: Oyster Fest 2015 – A No Rally, Rally

    Ken,

    You read this thread. Tell them it is new. If you feel guilty saying that make up a date that is less than ten years.

    I’m bringing my 65 year olf Ford toad. I’ll bet they won’t make me park it on the street.

Page 13 of 15