Forum Replies Created

Page 39 of 76
  • Jim/Chris

    Member
    February 7, 2017 at 6:53 am in reply to: 4 to go

    Hey Larry,

    Those Air Pockets were Terrible ! And Very High winds over the Ocean. Through the Winter months on The island. The locals that live there year round , Call them the Hate Months ! On the approach to Hyannis port Runway, You could see the nose of the plane Canting left and right. Was not scared at all by this point, The young Pilot done a great job. My Son Was conceived on Nantucket a few months later. He got His Private Single engine and His instrumentation only while in college. ( Cost Me a Bundle ) . He took Me a ride a few years back , and asked if I wanted to do some Maneuvers ? Maybe a Stall ? NO THANK YOU ! ! !

    Mighty Proud of Him !

  • Jim/Chris

    Member
    January 31, 2017 at 8:23 pm in reply to: The Great Outdoors RV Resort – Florida

    To all –

    We appreciate everyone’s input. The forum is a great place to ask for information or help! We will definitely look into TGO further!

    June

  • Jim/Chris

    Member
    January 26, 2017 at 8:43 am in reply to: Detroit Diesel Valve Adjustment

    Finally got the valves adjusted at 117,000 miles on my 04H3 Marathon. Exh. were fine. In. were a little loose, Inj. heights were off a little. Jake was checked, no changes.

    They also checked the CAC for leaks, none found.

    Change in performance, fuel economy, NIL.

    Finally found a recommended by Marathon Coach of Florida Detroit Diesel shop in Ocala. They did not have to remove anything inside, nor take the engine out. Saved well over $3,000 dollars from quote received from American

    Fleet, after sending measurements and pics to Brian.

    Job took about 4-5 hrs cost less than $500. Would recommend Detroit Diesel of Florida, Ocala office. Call ahead so they can assure that their slim valve adjusting tech is available.

    From Marathon, San Antonio, Fl. Joe states all XL’s need floor and or bed removed. Most H3’s can be done

    in chassis without any access from bedroom.

    KT.

  • Jim/Chris

    Member
    January 22, 2017 at 7:08 am in reply to: Liberty air compressors ??

    Excellent. Anyone else is welcome also, but keep in mind my approach may be Liberty specific however the principle will be universal.

  • Jim/Chris

    Member
    January 19, 2017 at 9:47 am in reply to: PC Maintenance Seminar 4 – April 8 – 9, 2017

    For those planning to attend keep in mind a big part of the seminar is the ability to interact with other Prevost enthusiasts. The actual classroom and shop sessions will take place on the 8th and 9th, but on Friday the 7th in the late afternoon we will have a meet and greet / happy hour / dinner. Nothing formal, but a great chance to socialize with others.

    Suggested attire will be a three piece suit, but if you don’t have one jeans and a tee shirt will work.

  • Jim/Chris

    Member
    January 18, 2017 at 7:39 pm in reply to: Toad Tow Bars ?

    I know a guy who actually took a picture of a poor slob making that mistake, then holds the picture in reserve for fun and sport, what a butt head.

  • Jim/Chris

    Member
    January 18, 2017 at 9:40 am in reply to: XL2 2005 Chassis slideouts only open about 6″.

    Has the coach had the engine batteries changed, or jump started recently? If both slides are doing it since they both have their own control system, unless both have failed components, I would verify battery voltage at the units and motors while in operation…

  • Jim/Chris

    Member
    January 17, 2017 at 9:05 pm in reply to: Fresh Water Tank Monitor

    Tim I have the aquarium pumps as well and have had them work on twice with no luck. I talk with Bob at Marathon FT Worth and he is going to install the same system that is on the new Marathons. It is 10 pads that mount on the outside of the tank and can, supposedly sense the slightest pressure changes inside the tank and read out in 10% increments. Once the new sensors are on the tanks, they get calibrated to use the tech link in the bus, and hopefully fix my system never reading tank levels.

  • Jim/Chris

    Member
    January 17, 2017 at 9:23 am in reply to: Prevost Show – January 16 & 17

    We caught some guy trying to take off with my shoes. Fortunately he hadn’t gotten too far when we cornered him and he gave them up.

  • Jim/Chris

    Member
    January 17, 2017 at 9:10 am in reply to: Water heater relacement

    Pres I think the way mine works is you have to have the Central Heat Control button on and the water heater switches on so it opens the two electric solenoids that allow the Webasto/Engine loop to go through the heaters.

    I think if the hot water switches are not on the system is not calling for heat and nothing will happen.

    Let me know what happens.

  • Jim/Chris

    Member
    January 8, 2017 at 10:48 am in reply to: Prevost Newbie Here – What to Carry and Ladders?

    Jon,

    Did you have to add another axle to handle the weight of having the Prevost parts department in the bay?

  • Jim/Chris

    Member
    January 5, 2017 at 4:48 pm in reply to: RV Clearcoat Paint & Body – Tampa, FL

    Evidently they are pretty much captive to Lazy Days and neither one has heard any feedback….good, bad or indifferent.

    Geo.

  • Jim/Chris

    Member
    January 1, 2017 at 10:06 pm in reply to: Prevost Chassis Model Years 2002/03 For XLII

    Reese,

    Here is the best advice regarding the skin concerns. Get a Prevost service center to inspect the coach to determine if there is an isse. At that point they will tell you no, or if there is one they will tell you if they will provide assistance with needed repairs.

    Unless the coach has had the rivet repair using the vertical seam cover strips if you choose to not have the coach inspected you assume all risk and possibly cost to repair the problem.

    The reason this issue has gotten so much attention is some coaches did have delamination and the repair is costly. Not all coaches were or will be affected, but the risk exists so an inspection is the best path for you to take.

  • Jim/Chris

    Member
    January 1, 2017 at 9:56 pm in reply to: Water pump

    Jim, I may regret saying this, but my headhunter pump has been reliable. I would want to investigate why your pump life spans are so short.

    Having said that there are options if you want to get a little creative. The headhunter toilet is an excellent choice but it needs a very high pressure, high volume flow for a short period of time. The pump is ideal because as soon as the flushing of the toilet drops system pressure the pump responds and provides around 8 GPM at a pressure likely in excess of 40 PSI.

    A substitute for the pump is an accumulator tank with a large outlet in the 3/4″ range or more with sufficient volume to handle a flush cycle. I have an approximately 1 gallon accumulator directly in line with the toilet flush valve and with all pumps turned off it will deliver enough volume of water at sufficient pressure to complete a toilet flush cycle. I installed the accumulator tank because I have a low volume 1.3 GPM 60 PSI back up water pump just in case the Headhunter pump should fail.

    In your situation I would suggest you install an accumulator and a small Shurflo type back up pump, but also get Headhunter on the job helping you find out why you are having premature pump failures.

    It took me a couple of days of messing around to get the project of a back up pump done, but since there is no downside I think you will agree it is worth the effort.

    Shurflo accumulator whose water line tees in directly in line with the Headhunter flush valve.

    Shurflo pump mounted in parallel lines to the Headhunter Mach 5.

  • Jim/Chris

    Member
    December 27, 2016 at 10:33 pm in reply to: Close call
    toss the old unit..get an induction unit. It fits right in, no alterations. Even Truk can do it. We never really used the cooktop before but we use it more now. You need special pots and pans but the results and lack of heat etc are well worth the change over.
Page 39 of 76