Forum Replies Created

Page 19 of 76
  • Jim/Chris

    Member
    January 21, 2020 at 9:45 am in reply to: Question of the week

    Al,

    Congratulations, the Chiefs looked great this weekend. Best of luck week after next.

  • Jim/Chris

    Member
    January 17, 2020 at 9:43 am in reply to: 2002 H3-45 Vantare Bay Lighs

    Found the problem and the problem was me. They do not work unless the master switch is on. My bad.

  • Jim/Chris

    Member
    January 13, 2020 at 11:19 am in reply to: Question of the week

    Al, had to pull the Redhead down off the ceiling the first quarter, she eventually calmed down..…all is well now….

  • Jim/Chris

    Member
    January 10, 2020 at 12:28 pm in reply to: Bad octal relay socket – sneaky failure!

    I am anal about logging work I do on the coach. I have many minor changes I have made to my coach, such as adding a solenoid valve and thermostat to limit water heated by coolant (which can reach over 200 degrees) so I stop coolant flow when the water in the HW tank is at 125 which is what the factory thermostat setting is.

    I have added more lights to the engine compartment.

    I have added multiple key off circuits for my dash cams, GPS and Pressure Pro. But every change has been logged, detailed and information about how to restore the coach to the way the factory built it is included.

    What Chad experienced is inexcusable. If an owner cannot afford to make repairs properly, or take the time to make subsequent owners aware of the changes they should not own a coach. Mickey Mouse repairs are often dangerous, poorly done, and an indication the person doing the repair shouldn’t be allowed to own tools.

    Chad is a pilot and I think aircraft owner and I am certain he demands work on his plane is properly logged and done to the required quality level. We should expect nothing less on our coaches.

  • Jim/Chris

    Member
    January 9, 2020 at 2:08 pm in reply to: Rv Park recommendation

    In the past, we have rented the cheapest room in a host hotel and “just parked” our RV in their lot. We kept the dogs in the RV and one or both of us stayed a fair amount of the time with them.

    Ask them about “Guest Parking” for large vehicles. Maybe all they want is the money. Dry camping and a room might still be cheaper than a RV park some distance away plus the drive back and forth.

  • Jim/Chris

    Member
    December 29, 2019 at 1:36 pm in reply to: Marathon Calendar

    Mark, you had better watch out. Helen would backhand me quite often, for no reason, and now no hair grows on the back of my head due to follicle damage.

    Just a warning.

  • Jim/Chris

    Member
    December 22, 2019 at 9:59 pm in reply to: A Merry Christmas To All

    Davey,

    Reading your posts and the stories you share make us strive to be better people. God bless you and your family and Merry Christmas to you all.

  • Jim/Chris

    Member
    December 22, 2019 at 12:45 pm in reply to: Delamantion

    If you are looking for an XLII the strips are obvious. They are vertical strips about 2″ wide that cover the joint between the coach skin panels and are going to run from beneath the windows (the belt below the windows) to the top of the belt above the bay doors. Beneath the strips the ends of the skin panels have been riveted to the chassis structure as well as glued.

    Despite Jim’s assertion that every coach without the rivet repair will delaminate that is not completely correct. Some coaches never had skin delamination. But that does not mean the coach should not be tested for delamination.

    If anyone selling a coach tries to talk you out of having Prevost test for delamination walk away. Testing involves tapping the panels and listening for a sound that suggests the panel has loosened. Pushing on the panels will be a part of the test because panels correctly bonded will not “give” or “oil can”.

    Finally Prevost will pressurize the coach and spray a soapy water solution on the skin perimeters and look for bubbles to indicate the air is escaping from behind panels that have come loose.

    At that point you get either a clean bill of health, or you get an estimate of the cost of repairs plus a possible indication ofi if Prevost will provide some of the repair cost.

    My coach was one of the last ones repaired at Jacksonville prior to the rivet repair process. It does not have rivets or the strips and I am watching it like a hawk looking for signs of panel delamination. So far after 8 years, nothing has shown to be a failure of the panel adhesive. Do not rule out a coach that does not have the visible strips, but also do not buy one without the strips without a Prevost evaluation.

  • Jim/Chris

    Member
    December 21, 2019 at 6:02 pm in reply to: 1998 Royal help identify item

    On my Marathon, one was used to control DVD player mounted in bedroom A/V center.

  • Jim/Chris

    Member
    December 18, 2019 at 8:51 am in reply to: Jake Brake questions

    Does DD/Allison have a safety built in so you can’t accidentally down shift to low?

    I have this recurring nightmare of some jurk cutting in front of me and I push the down arrow fast to many times, the trans goes to 1st @ 55Mph then there is my oil and parts scattered on the road while the idiot drives away clueless to what just happen

  • Jim/Chris

    Member
    December 17, 2019 at 9:54 pm in reply to: A Trend

    Remember Cash for Clunkers?

    Many of us never, ever dreamed that would happen.

  • Jim/Chris

    Member
    December 4, 2019 at 1:06 pm in reply to: Is there a salvage yard for old Prevost

    While I am certainly an advocate of using junk yards when appropriate, I would tend to limit that usage to parts no longer available from Prevost or stores like NAPA or the converter.

    Window accessories come to mind as a good example.

    This is conditioned on the expectation the owner who is buying parts knows what he is doing. I have found almost 100% of what I need on line from the original manufacturer, or have found ways to repair or remake things I have needed so junk yards are a last option, but one I would consider.

  • Jim/Chris

    Member
    December 2, 2019 at 8:22 pm in reply to: Headhunter Mach 5 failure modes?

    Did some checking on the Mach 5 today.

    Bus parked in driveway not hooked up to outside water. Turned on pump, it ran a few seconds shut off, stayed off. Ran some water in sink for a couple seconds then shut off. Pump came on then shut off and stayed off.

    Drew some reverse osmosis water from new refigerator, about half a glass. After a few seconds pump came on ran a few seconds then off. 7 seconds later came on ran a few seconds then off, reapeat, repeat. Went out and shut of “to refrigerator”ball valve in reverse osmosis water line. Pump stopped cycling. So the slow cycling was normal operation with reverse osmosis replenishment.

    So I think my worries were self inflicted. When I started using the reverse osmosis system, the pump acted as it should, keeping pressure up to X level.

    I did test for presence of a water pump accumulator, there is none. With the pump shut off you only get about 1 second of water flow that tapers to nothing quickly. It has always been this way with no ill effect. The pump ran when water was needed and then shut off.

    As to why a couple times earlier in the trip before the refrigerator replacement and turning on the reverse osmosis, the pump would not come on when water was need or the toilet was flushed despite the main panel breaker being on I still don’t know. Also not sure why on my close observation while it was hooked up to campground water pressure it kept cycling on and off immediately (causing me to just shut it off and only turn it on to flush the toilet), I also still do not know, but suspect has something to do with the check valve that stops coach water pressure from pushing water back to the campground supply leaking.

    I did not bother to pull the control panel/cover off the top of the pump to look for water as there was reason for the cycling behavior and I figured if it ain’t broke, don’t take a screwdriver to it.

    When get some time will hook up water hose from house and see if I can duplicate the fast cycling.

  • Jim/Chris

    Member
    December 2, 2019 at 8:17 am in reply to: Converters who no longer convert Prevost?

    The problem with retaining value is everything we buy has a depreciation curve of some sort and it typically relates to how much actual life is left in the product. Think about our cars. The average car is often 10% worn out its first year, and each succeeding year depletes another 10%. By the time the car reaches its 10th year stuff starts to fail such as starters, alternators, engine sensors, etc. making the cost of ownership directly related to the accumulated repair needs that have to be addressed.

    So we are conditioned to think age defines value.

    But in the case of a Prevost conversion that is not true. Because of complexity we probably have infancy problems with a new conversion so there will be visits to the converter and Prevost. But at some point we are done tweaking those issues and the coach becomes very reliable. By the end of its first decade or so of life a great deal of the expense outside of required routine maintenance is elective work, ranging from such things as replacing a floor or going to ipad controls or replacing an appliance that is starting to act up.

    I doubt if a 15 or 20 year old coach that has been well maintained has less than 75 to 80% of its life remaining and yet it can be bought for a number that suggests it only has 15 or 20% of its life remaining. We need to sell remaining life and we do not.

  • Jim/Chris

    Member
    December 1, 2019 at 4:22 pm in reply to: Toe kick heater

    Thanks Chuck.

Page 19 of 76