Dick
Forum Replies Created
-
Once i figured out what it was and who it was, a thought crossed my mind to ask the guy to move to a different site or watch what we are watching! And stop playing with his shades! But i played nice, and just bitched inside our bus!
-
I disagree. I don’t think this forum sucks. From the first day that we thought about a bus, I stummbled arcoss this site. It has been a lifesaver. Much of the knowledge I have gained is directly attributed to this site. Wackos or not, this place has been a wealth of knowledge. I’m still confused as to who the wackos are. Maybe its me?
The best part of all is seeing how close knit the community is. I like the commraderie. In the vanacular of today: “This place Rocks”.
My 2 cents.
-
Generally speaking when an electrical problem appears to have fixed itself it is an indication of a bad connection.
If you know what connections were disturbed or mioght have been disturbed tightening them or opening and closing the connector to clean the contacts might be all that is required.
-
If I had Jimmy’s problem, I would do exactly as Jon suggests.
I was hoping the AF-1 digital marketing/social meda person who is assigned to monitor the PC Forum would have chimed in by now. He or she must be really busy today, maybe they are short-handed with the holiday coming up.
-
Jimmy, before you invest in tires (assuming yours are safe) you have to find out why you are flat spotting.
I flat spotted the tires on an H2 Hummer because I left the parking brake on. From that I can tell you that inside the coach you have no idea what is happening with the toad. The only way I know of to flat spot tires is to skid them over a distance so for whatever reason your brakes seem to be locking them up.
I suggested having someone ride alongside the toad while you pull it with the bus and do a series of stops, starting with a gradual stop, working up to a more aggressive stop. Since the AF-1 as set up is unlikely to keep the brakes applied after you have released the coach brakes due to its design I still suspect strongly too much force is being applied to the brakes and under some circumstances the brakes are locking They should never lock. As the racers on this forum will tell you if your brakes are locked your braking force is very little if any. You want the AF-1 force applied to be proportional to the coach, but just short of lock up.
If the toad is locking the brakes as it appears AF-1 should be able to tell you how to modulate the braking force. The fact someone inexperienced installed them it is entirely possible the installation was wrong which is another possibility, but what is causing the problem has to be identified.
-
Tom wrote: “I always install my own M & G and I hook a 50′ air hose to the bus and car. Then by hand with a helper, move the car and have the helper apply the bus brakes to assure they apply and release. Easy to do and at least you know it’s working correctly.”
Its this kind of advice that we get from the Prevost Community forum which makes the PC forum my choice for Prevost information and makes every penny of the annual dues more than worthwhile.
Does Air Force One have anyone monitoring the PC forum? Maybe the AF-1 monitor could jump in here, comment on this issue, and help Jimmy out.
-
Do you want me to save you a couple the next ones I change out?????
-
Colt, could it be you ? Geo.
-
Thanks Jon! Understand what you are saying for sure. I have been eyeing a few that have full documentation and yes I think that would be the way to go. I’ve had probably ten RV’s and one diesel pusher, and I know they do not compare to or are even close to the same scale as a Prevost. I figure if I’m spending that kind of money on a blue collar income, I’m going to get the best! No more stick coaches for me! Your advice and concern is taken seriously and has helped a lot in my search. Thanks for all your time. Kent
-
Jon,
Any suggestions for a quick temporary fix. My compressor is running almost all the time and it’s that darn Tee. I’ve tried to get it out by pushing on the brass part but it won’t budge. I’m worried if I yank it out it will ruin the entire manifold.
For the permenant fix – did you use the existing tubing? The tubing looks short to fit into a new manifold? They have this manifold tucked up close to the top behind a bunch of stuff. It’s tough to get there.
-
Those manifolds have the same issue as individual push in DOT fittings in that over time they leak. I am gradually replacing every push in fitting, starting with house and Prevost manifolds, including adding shut off valves, all with compression fittings.
That one contains most of the converter air curcuits.
It is hard to see from the photo, but I replaced both the horizontal and vertical push in manifolds on the Prevost side of the pneumatic system. Not shown are either of the two solenoid valves that shut off air to both of them when the key is off.
Barely visible at the bottom of the manifold for the Prevost systems just lower left from the side marker lights is a solenoid valve I added which closes when the key is off. Now all Prevost manifold air circuits are closed with the key is off except for slide seals. All house sir systems have pressure with the key off.
I still have a few air curcuits unidentified and not yet provided with shut off valves, but when done I will have all compression fittings, and the ability to turn off and isolate every individual circuit so I can chase air leaks easier.
-
In the 25 years we’ve been motorhoming, we’ve for the most part relied on the Trailer Life directory, and we also use the KOA directory. We have no problem camping with other campers, and a lot of campgrounds have plenty of room for a 45-footer towing a car–lots of “plastic” 45-footers on the road. If you have a very long stacker trailer, that’s a different story. Many of what used to be upscale RV parks have turned into trailer parks these days, with many families living in an RV full-time, not necessarily by choice. We have already been in campgrounds where a Prevost is a rare sight, which does not bother us, nor do the good folks in the campground.
That being said, looking in the directory, I see two campgrounds in Kentucky I would consider if I was traveling on I-75; one in Crittenden called the Cincinnati South Rose Garden with 65-foot pull-throughs, the other in Georgetown called the Whispering Hills RV Park with 60-foot pull-throughs.
Safe travels! -
I’m waiting for a couple items that have been back ordered for well over a month.
-
It’s only a day’s drive no need to stop !! It can’t be over 500 miles is it ???
-
Thanks Jon, it would be next to my buddy’s shop out of the wind under cover with the back towards the North with protection there’s as well. Big decision for sure! Couldn’t ask for a better place to go for knowledge and answers on this whole idea other than PC! Thanks to every one of you who has chimed in! Greatly appreciated and will keep checking in to see any other posted ideas and thoughts. Thank you!