Archived
Forum Replies Created
-
I have a couple of times. Last time I called a customer service number and got an answer.
Anything one of us can help with?
-
Thank you, Tom.
-
My 96 (95 chassis) has the “old” tag logic and does the same thing. It will dump once AUX air press goes below about 20psi. Which from what I’ve heard from others is lower than some. No idea why.
There was a service or maintenance bulletin posted here awhile back about this very thing. Three “kits” were once avail to convert to newer tag logic which doesn’t dump when AUX air bleeds off. Kits are/were based on chassis config and VIN range. I called Prevo Parts regarding these, I think all three were in the $400-500 range and were not in inventory. Parts guy was going to check some other places and get back with me. He didn’t and I never followed up either.
The info that was posted here listed each kit and respective contents.
-
Bill wrote: they are going to do a front end alignment as well….
I’ve been told a number of times that we should be getting a three axle alignment, not just a single axle alignment. Is Prevost telling you something different? Dick
-
Actually the VPOD does control turbo speed as one of its functions. It controls boost as called for by the ECM and limits speed thru blade angle. The turbo speed sensor sends information the the ECM to help determine the VPODs response and control of the turbo.
-
George, for now the sign up list is above. Given the time frame between now and the dates set a lot of people are not making a firm decision this early. For the two events above we can get a firm list because we get great cooperation from Pandion Ridge. They keep us informed about reservations.
We have no access to the attendee list for the Lakeland event since reservations are made through Carlisle. Sometimes we have gotten information, but we often will not know who is coming unless they post it or we see them when they show up. Parking at that event is first come-first served.
As to parking at Pandion Ridge they usually assign spaces. They have no idea who drives what conversion and unless a member lists their converter in their signature line, we don’t even know who drives what.
Personally it does not matter to me if I am surrounded by all different conversions because we all share the same interests and concerns and I would hate to see PC divided into cliques based on who has what conversion.
-
Any chance of having a sign up list for the rally?
Be nice to see who is going and their site number at the resort.
Be nice to have Royale’s in one spot Liberty’s together and Marathon”s together.
That way we could exchange first hand information on our buses and look at the particular item first hand.
Currently they have for dates April 14-19
14 deluxe sites Pull thru
5 Lakefront lake view pull-in
32 Boulevard Back-in off main roadway
18 Pine view Pull in sites
32 standard are back-in sites
All sites offer the same amenities
-
Upper a Arm grease boots and the like around the bus…I think… they showed me one on the ground where it’s just a ball of grease… they are going to do a front end alignment as well….
-
Archived
MemberDecember 7, 2020 at 1:28 pm in reply to: New RVs being built tight spaces get tighterWhen the economy took a serious hit in 2008 most Prevost converters either shut down all production, or only did a handful of conversions.
As the economy rebounded Prevost conversion production has ramped back up, but at seriously reduced levels compared to prior to 2008. Of the converters I have spoken to regarding production figures the message is simply that if they attempt to ramp back up to pre-2008 production levels the quality is going to suffer because a lot of the qualified production people are gone and not returning. Training new employees is difficult and expensive so while bigger sales numbers are a nice goal, the converters can’t and won’t increase volume unless their production workers have the skills and quality will not suffer.
If the proposed increase in volume stated above ends up being the actual production output it is a guarantee a lot of junk is going to hit the streets, and to add to the problem the industry has been unable to service the defects at the current production levels and adding such a high percentage of new units means owners of those RVs are not only getting junk, they are not going to be able to get that junk repaired.
But those new units will have all the fancy features and a “warranty”.
-
Archived
MemberDecember 7, 2020 at 12:27 pm in reply to: New RVs being built tight spaces get tighterI’m on the RV Horror Story Facebook page.
The stories are beyond “you just can’t make this sh** up!”
Lippert frames on the towables that are obviously under-engineered, critical welds without penetration, limited gusseting at suspension mounting points, empty weights close to max gross (so the tires, wheels, brakes, axles, springs, etc. are overloaded as soon as its filled with water, propane, and linens. Tires are often referred to as China bombs!
And the new ones get deep into five figures and larger fifth wheels quickly go to $150,000 … plus a truck to pull them.
-
Archived
MemberDecember 7, 2020 at 9:36 am in reply to: New RVs being built tight spaces get tighterI help a buddy out sometimes in trade for letting me use his lot for working on travelers Aqua Hot’s , But anyways he is a Forest River dealer and he been selling a lot of these tow behind trailers and 5th wheeler’s,Oh my gosh we are talking cheese balls, the wood paneling inside it must be paper thin, Lot’s of staple’s through wires ,pex washers missing on fittings and on and on. And I replaced a complete power awing because the owner moved trailer with awning out and ripped it off, kind of like the movie RV with Robin Williams, Pretty scary. Their pumping these things out with no final checking of any kind. PDI’s Nothing like a bus.
-
Archived
MemberDecember 7, 2020 at 7:47 am in reply to: New RVs being built tight spaces get tighterWith manufacturers cranking them out, I suspect quality control will be missing.
-
Archived
MemberDecember 6, 2020 at 11:27 am in reply to: Anyone have recent visits/reviews for Hilton HeadThe HH Motorcoach resort is the way to go. Beautiful sites and convenient to restaurants and beaches.
The marina sites are very tight and require some magical moves to get in and out. Then when you want to pull out to go anywhere the 4 lane road is so busy – it is a challenge to get out in your car.
Lots of good places to eat!!
-
Archived
MemberDecember 5, 2020 at 4:29 pm in reply to: Anyone have recent visits/reviews for Hilton HeadWe have traveled to HH many times, and prefer HH Motorcoach. Sites are all unique and beautiful, great pool and amenities, close to beach, stores and restaurants. We roll with kids and a dog, so we value some resort features differently than others.
-
I don’t know if any of our members have an ability to communicate with CA officials, but while this apparently is intended to keep out of state transients away from long term RV park residents presuming the transients might carry the virus, if is going to force RV travelers to either drive to places that they can stay in overnight safely or have these travelers over nighting in parking lots, rest areas, or truck stops, potentially increasing risks to them, and likely not accomplishing what the regulations hope to accomplish.
If a transient spend the night in an RV park they can isolate, and they will be in a safe spot, and not likely to drive when tired because an RV park will not accept them.
RV park owners can impose certain rules and restrictions to isolate travelers without exposing anyone to covid 19.
The governor or whoever is behind this restriction needs to understand it was not well thought out.