Forum Replies Created

Page 79 of 2304
  • Archived

    Member
    February 26, 2021 at 11:03 am in reply to: WE ARE 5000 STRONG

    I can’t cut a break. I still have to grow my own food and this guy has enough money to buy houses and buses and cars all the time.

  • Archived

    Member
    February 26, 2021 at 9:28 am in reply to: Foot rest motor bad

    Hi Dick,

    We talked about this at the time. The parts were correct but the brackets were mirror images of mine. I took the parts out of what you sent and put them into my existing bracket to make it all work properly. Thanks again for your help and generosity in sharing your stash of parts.

    ‘Jerry

  • Archived

    Member
    February 26, 2021 at 8:48 am in reply to: Coaches for sale ads don’t display on Chrome

    The Ublock extension is automatically loaded by default in Chrome. Found it in address bar. Removed and now ads show. Now my new computer displays ad pictures.

  • Archived

    Member
    February 26, 2021 at 8:20 am in reply to: Burned out H3s

    I have seen similar damage in XL’s as well. The info I have was that it was due to bearing failure/abuse and it got so hot the tire caught fire/blew.

  • Archived

    Member
    February 26, 2021 at 7:43 am in reply to: WE ARE 5000 STRONG

    Like the big brothers I never had , I come to you all for advice with the knowing you will be there to help . Thank you Jon & Tom 🙂

  • Archived

    Member
    February 25, 2021 at 5:52 pm in reply to: H3-45 lower body panels

    Thank you that is great news. I will call Prevost get them on order.

  • Archived

    Member
    February 25, 2021 at 3:44 pm in reply to: Aquabrass shower

    Ralf:

    Went down that road over 2 yrs ago when I first got my H3. They are not available any more. Took mine apart and soaked it in CLR then put it back together. Surprisingly it works. The Spring Behind the hot/cold adjustment knob is pretty strong, be careful when you take it apart. There is a big spring and a small spring, take pictures and make sure you put it back the same way. They will fit the other way, Don’t ask me how I know. Also make sure you put a cover over the shower drain so parts don’t end up going down the drain while you are working on it, almost did that too.

    Your other option is to remove the shower wall (most likely destroying it) and replace the mixer valve with a new one.

    Chuck

  • Archived

    Member
    February 25, 2021 at 3:28 pm in reply to: Foot rest motor bad

    Jerry, did I send you the wrong part for your seat ???

  • Archived

    Member
    February 25, 2021 at 1:01 pm in reply to: H3-45 lower body panels

    easy stuff just buy your replacements get them painted and the go on with a 3m adhesive I forget the part number right now but I can get it for you. You can pull your factory ones right off with a little force. I have replace 3 on my bus.

  • Archived

    Member
    February 25, 2021 at 11:31 am in reply to: WE ARE 5000 STRONG

    Congratulations on the milestone! I check the site almost daily!

    Mark

  • Archived

    Member
    February 25, 2021 at 7:04 am in reply to: Series 60 coolant 2 Thermostats

    LOCATION of thermostats when you open engine doors they are located on left side of motor. You will have to look around turbo pipes,just in front of turbo to the right. Memory housing is fairly heavy and I accessed it by going over valve cover, also replaced sending unit when I was back there.

  • Archived

    Member
    February 24, 2021 at 6:25 pm in reply to: Genesys coach

    school bus conversion from 90’s

  • Archived

    Member
    February 24, 2021 at 12:28 pm in reply to: Oil leak on back of duals

    Jerry:

    Great find

    As noted earlier, Please post on users map for others.

  • Archived

    Member
    February 24, 2021 at 10:48 am in reply to: Foot rest motor bad

    Hi Tony,

    i somehow missed your post originally. When I did mine I found the motors and gear boxes were like tinker toys – mix and match. A poster here had a motor and drive that looked right in the pics but was a mirror image of mine. In my case the worm drive was stripped. I was able to disassemble mine and use pieces from his to fix mine. Easy to do once you unbolt the seat from the floor and have the chair on its back.

  • Archived

    Member
    February 23, 2021 at 6:49 pm in reply to: W/D Shutoff Valves

    I sure hope you can find shut off valves but I can tell you that my ’88 did not have any. However, I don’t believe there was a Splendide in the original coach so the guy who did the conversion may not have installed any. I also only had cold water input so I added a hot line and installed shut-offs.

Page 79 of 2304