Tim
Forum Replies Created
-
My kids named it “BOB” Big Old Bus
I don’t think it very big but it is old.
-
When I click on it I get this:

-
I got some at the Orielly auto parts store. Matching is gonna be your
problem.When I used to do cars – there were auto upholstery places that had automotive carpet. You could look for one of those if you need to match it.
-
Pulling the parking brake probably did not help due to an anti compounding valve that prevents over stressing the brake components, but regardless you are to be praised for quick thinking and a successful outcome.
The lesson here is very clear. We can be presented with a dangerous situation such as this one every time we drive and in addition to making sure our coaches are in tip top shape for such braking events, we as drivers really need to be constantly on the lookout because everyone else is really out to get us.
-
Kohler 20KW (or what ever Liberty puts in these things).
Jeff, On the inside panel (while I am running the coach), the inverter light is on, which is good as it provides us power (not sure it’s really charging the house batteries?). Havent been in the 2nd bay yet as it’s rainging rather heavy out. Once I get stopped tonight west of KC and hopefully out of the rain, I’ll go in there and see what I have in terms of the watch dog.
My uneducated assumption is that the belt is dead on the fan as I dont think we have ever touched that (I didnt know there was one back there, assumed it was an electric fan) and I never asked you to swap that one out.
As for starting it, I pulled the generator out, and used the start switch on the generator. First time it took a little to start as it was dry due to low fuel. The second time it started right up. The first time it shut off, I am not sure if it was due to overheating or low fuel? The second time it was overheating and the third I watched the temp, got to about 205 and I shut it down as I figured the rad fan wasn’t coming on so no need to let it go further.
What is the process for resetting the watch dog? And I am thinking that is what is what manages the system inside which allows for autostart and regular starting inside the coach?
-
That could be on the list except they don’t repair themselves. I am pretty sure the issue was a relay valve.
-
Both before and after towing.
-
On my 3rd Prevost since 1996. And don’t remember ant rubber smell. Currently pullin a Ram 2500 diesel 4×4.
Bill S.
-
I think that the design of the toad, height off the ground, how the exhaust is exposed under the vehicle is why some don’t get the smell. The Suburban and some trucks may not collect the tire/rubber dust as some others do. Towing my F150, the smell is not as noticeable as the HHR or Jeep we tow.
The Stacker trailer……..doesn’t smell at all!
-
Sounds good, will do. By electrical box, I assume you mean the breaker panel in the galley and not the panel below the driver’s window. The AC wiring connections in the inverter looked fine, so that’s a good sign.
-
Replace them all ASAP. They are cheap compared to a wrecker comming out ($2,5000 +/-)
If the R14 goes you wont be going anywhere. I think that is the one I replaced.
Also, someone correct me if I am wrong but there are several variances to these valves. Hose locations and such.
I bought a whole bunch of R14s from a friend that furnishes brake parts to the local trucking industry and they would not fit.
If you can verify with Prevost. They aren’t costly.
I think my parts said an R14 Vertical. (the way it mounted I guess)
-
Newsome Electronics 352 274 4507
They helped me with my obsolete KVH dome.
Tell us what happened…did you forget you were pulling into the garage?
-
Bill and Jack. Thanks for the quick responses.
Bill: Yes we are planning on being in Mountain Falls this weekend. If your dome is approximately 30 inches in diameter and between 9 and 10 inches tall please bring it.
thanks
-
It is most likely the R 14 relay valve , the park brake valve could also be leaking, but if the threeR12 and R 14 have not been replaced I would do all four of them you can rebuild them but it’s about the same amount of work plus you can then put comp fittings on all the air lines, if you put new relay valves
-
Tom, what did you do with Nancy?
You know that we have ‘Amber’ alerts in our area. We all know that she wants slides! Ha ha!
Mark