Jon
Forum Replies Created
-
Theoretically it is vapor coming out of the hose. If it condenses inside the hose it can be caught by securing a can under the hose, If it drips a lot of oil it is a good sign there is a lot of blowby from the engine and it will not be long before the engine needs some serious work.
-
On the subject of crankcase breather tube.
Is there any modification to catch the oil droplets that dribble occasionally from the tube?
Chuck
-
Hi Doug;
Miss you guys
Mine is all hydraulic. Not positive but think it’s a different animal as it pertains to the operation.
Chuck
-
So is this a unique setup? Does no one have a generator setup that is similar? No one knows how to access those belts?
-
I’m curious. Does State Farm insure the coach for agreed value or ACV?
Do they know that the cost to repair even “minor” damage can get well into 6 figures quickly?
It is one thing to get inexpensive insurance, but if the courts have to get involved or if repair work stops until the owner and insurance company agree on the cost, who will do the repair, or that until repairs are well underway there will possibly be big bucks associated with “hidden damage” the coach can be tied up for months, if not years.
For a newer coach that has depreciation at about $1,000 per day time spent fighting has a very high cost.
-
Many owners forget selling the used tires. Most tire dealers set your used drive axle tires aside.
Good move Bill.
AL
-
The battery light was coming on due to a short. TEC in Coburg found chafing wires that were grounding. All repaired, no warning lights! Alternators are both good. The grounding wires provided the ‘excitation’ power for the alternators.
-
In the case of a lot of items to be serviced ignorance is not bliss. I recognize even the best maintained coaches have stuff break or fail unexpectedly, but we as owners are the final voice in what gets checked, tested, replaced or repaired and when. Whether we like it or not we need to understand some of the basics. If it is made of rubber it has a usable life of xx years due to aging rubber being the factor. Air bags, valves with rubber seats, brake chambers, and the like have a predictable life span.
Belts are rubber, but fabric reinforced so they may last longer. Radiator hoses can have a shorter or longer life depending on numerous factors.
That type of arbitrarily selecting a replacement time can be influenced by where the bus is used, how it is used, and various environmental conditions such as heat, humidity, salt air, etc.
One thing is certain. If it is on the bus it will break. A second certainty is if it is replaced before it breaks in a situation controlled by the coach owner the cost is going to be far less than when the owner loses control over how or when and by whom the replacement is done. I know of owners who paid in the thousands for a simple repair, such as a brake system component failure that was repaired by less than $100 for the part and 1/2 hour for the repair because they had to get towed and then were at the mercy of the shop that did the work.
-
I don’t doubt you are correct, but if you do not mind stretching every amp hour of service from your AGM batteries it is important to you.
It is not how I manage my coach, evident by the fact I set a life limit on a lot of my bus components such as 10 years for air bags and 5 years for AGM batteries. I realize I sit at one end of the scale and others that use components to failure are both right. If you can open a bay door and see and touch batteries having an AGM in your system makes more sense than a Liberty in which it takes an act of congress to see or measure the condition of house batteries because the entertainment center needs to be removed.
-
They used my Bill Of Sale from February 2021 to set the Agreed Price. My agent even said I should call every few years and lower the Agreed Price as the bus depreciates.
-
Good question, Jon, for which there are several good answers.
First, one can use the AGMs for a much longer period of time if they are freed of trying to also power the 120vac loads through the inverters. The voltage on Lead acid batteries sags so badly under such a load that the amp draw is higher and some appliances will suffer. Li batteries do not sag nearly as much powering 120vac loads through an inverter so amp draw remains lower and some appliances will run better and live longer as a result.
Second, by leaving some of the lead acid batteries in place and using a BtoB charger to allow the existing alternator to also properly recharge the Li batteries there is no need to alter anything in the existing house battery charging design or implementation like you have to do if you go to all Li. If a voltage spike occurs when the battery monitor on the Li batteries suddenly shuts off the fully charged Li battery with the alternator still turning, the Resistance in the LA battery will absorb that spike without potential harm to the rest of the system. No re-engineering required.
so, the owner benefits from being able to extend the life of their existing LA batteries with no need to alter what they already have other than the simple installation of a BtoB charger to keep the Li batteries properly charged while driving and an inexpensive standard RV converter/charger to keep the LA batteries charged while on shore/gen power. Much simpler for most older buses than having to reengineer everything to match the recharge profile of Li batteries while driving and while on shore/gen power.
With the prices of high quality Li batteries falling so rapidly it is cost effective to gain the benefits of Li rather than simply replacing the existing AGMs with new AGMs in older busses. My take, anyway.
A much more expansive discussion of the many benefits of keeping some of your LA batteries to power just the 12vdc loads and adding new Li batteries to power just the 120vac loads through your existing inverter/charger(s) is contained in the articles that I wrote that have already appeared in Bus Conversion magazine and the follow on article that will appear in the next edition.
Jerry
-
While the use of Li and AGM may be made to work, the question is why?
If 2 Li, (or 3 if desired) works why waste time, energy and complexity to screw with AGM batteries? I know Li cannot be economically justified, but we Prevost owners do a lot of things than may not make economic sense. This is especially true for a Liberty which requires removal of the entertainment center just to be able to see the batteries so anything that eliminates the need to screw with the shorter lifespan of the AGMs is a huge plus.
-
Pulled the covers off our 2 five yr old Magnum inverter/chargers to re-tighten the electrical connections and to blow out any dust.