Jim/Chris
Forum Replies Created
-
Jon very well said. Prius seems to be the “go to” vehicle for the hypermilers. I’ve been cut off while towing heavy uphill more times than I care to remember. What I do remember is the vast majority being a Prius with an idiot driver staring at a dash readout of some sort.
-
Nice to see this. Ive begun to wonder what exactly they teach in drivers ed. Or do they even have drivers ed anymore
-
Jon: We have an effective tool for those morons who jump into our lane at 20mph … the air horns. A very long series of long blasts … until they get up to speed. I’ve found it to be very effective.
-
Alex:
What are the prices you are getting for the Norgen valves?
-
Marshall,
Try running generator without rubber hose between air filter and turbo. Caused from internal ply separation. This could explain shut down time levels.
2nd ….check inside electric control black box for loose electric
connections.
AL
-
Thanks for the input….Hmmm, not a super glowing recommendation. I have the XZE on my 40xl and they ride amazing, replaced Bridgstones with them and the difference was massive.
-
what would you expect your all in budget to be?
-
We had the pleasure of meeting Doug at a Know your Prevost Seminar at ETLC.
He will be missed by all blessed to have met him.
We will remember him and his family in our prayers.
-
I’m getting a sense you may be considering refreshing an entertainer coach, or maybe converting a seated coach.
No matter how cheap the chassis is due to age or mileage, by the time you get done it will be far more expensive than buying an older motor home conversion. Or it will be a less well done and conceived amateur built conversion. Fixing an old high mileage chassis can be expansive even if only the cost of parts can be considered because an old high mileage chassis is never going to be equal to an old low mileage motor home chassis.
Please do not take that as an insult about your skills, intellect or creativeness. It is a reflection of how expensive it is to try to duplicate a professional conversion. But even more so it is a testament to how much knowledge converters have with respect to interior and system design, space utilization, and quality. It is almost impossible for an amateur conversion to match a professional conversion due to the knowledge gained by converting and servicing hundreds of coaches.
-
If I replace my ATS switch, what is a good solid unit?? made in USA with nice big relays no surge protection because I have a built in surge protector??
-
Tom, I logged out and back in and it’s there.
I like it.
-
Jim/Chris
MemberJuly 10, 2020 at 4:13 pm in reply to: Middle side marker and turn light not workingThanks for the quick feedback.
So I am not being stupid, is the ground just the bus itself or does the screw go into a ground behind the stainless of the bus? The way they both work is that they screw into a hole in the skin and the ground from the light fixture just goes to one of those screws. I have assumed that the bus shell itself then is acting as the ground, since I can’t see behind the skin. Both “hot” wires come out of holes separately but who knows what happens behind the stainless.
I suspect grounding issue, which I have solved before by cleaning the contact points or changed screws that got rusty, but neither is solving it here.
Thanks!!!
-
I’m posting this for Fred. Headline – Max 737 90 degree takeoff. We know it’s BS, but looks impressive.
-
I don’t like auto level, I had HWH air leveling on a Foretravel U320 I use to own and they always go to high, When we bought the Prevost with the Prevost level, I thought it was a down grade from the HWH, I was wrong! I really like the stock Prevost leveling system, It’s simple, works well Less to go wrong.
-
Headed to Yellowstone this morning from Ft. Collins, CO via 287 staying at Grizzly in West Yellowstone. Any tips on the route?