Dick
Forum Replies Created
-
You could hear & see the antilock brakes working on most of them, very few jacked knife
-
I have had a pair of those for a little over a year and they are almost too bright to use.
Lights up a white concrete highway for what seems like miles.
One driving spot on the drivers side and one difused for the right side to cover the shoulder and the ditches.
Love em
-
Good job! Thanks for posting.
DKO wrote: “Thanks to Jeff for helping know how to drill through the stainless with no problem at all.“
Can you share the drill through stainless steel secret with us?
DKO also wrote: “The current fog light switch is a rocker with on-off-on but I do not know if it can except a feed from two different sources. I assume it currently has one feed and then two switch legs that were previously going to the yellow fog light and the white fog light in the PIAAs. I will check it out. Anybody know?”
You should be able to put Triple FoxTrot’s DPDT “on-off-on” switch before the existing “on-off-on” switch so that the existing switch can get power from two different sources. After thinking about it more, Triple FoxTrot’s DPDT switch could be a “on-on” switch because you can switch the lights off with your existing switch. Having two “on-off-on” switches will result in two ways to have the light “off”, which might end up being confusing. Make sure whatever you do, everything is properly fused.
-
Thank you. Thanks on the license plate too. I have a PC plate I need to get mounted too.
The current fog light switch is a rocker with on-off-on but I do not know if it can accept a feed from two different sources. I assume it currently has one feed and then two switch legs that were previously going to the yellow fog light and the white fog light in the PIAAs. I will check it out. Anybody know?
Davy
-
Thanks. Thanks to Jeff for helping know how to drill through the stainless with no problem at all.
After seeing how bright they are I am thinking I would like to wire them into my house 12 volt side so that I could turn them on and leave them on at night when I need lots of light. You talk about hunting in the deep woods in style.
I am thinking of situations when I have my tent up in less than stellar neighborhoods, which are great neighborhoods for tent revival. I have never had any one mess with the bus but the tent is a target sometimes at night. Men love darknes when their deeds are evil. No one has ever messed with the tent when it is bathed in plenty of light.
I suppose I could wire them to two separate sources, one house and one chassis, as long as I made sure only one source was on at a time. They presently work only with the key AND switch on. With the key off I could run them from the house side when needed at night. Am I thinking correctly?
Davy
-
I had the best time. Really enjoyed visiting the all there. Especially those that allowed me to consult with them on their Webasto Burners.
Thanks Jon and Tom and the folks that helped make this such a good time.
I’ll be back.
Rudy
-
HOw many five gallons jugs did it take?
-
This is a great thread for us. Our seat appears to leak like a sieve. While at Prevost Jacksonville I mentioned it to the tech working on the coach. He thought it was the switch/valve mechanism and suggested it needed to be replaced. It was getting late in the day and metioned I should be able to replace it. So we bought one and I intend to tackle replacing it. Given the location, I don’t expect this to be a fun, exciting, and rewarding experience.
Reading this thread … the first thing I’m going to do is check for a broken air line and not start with the valve/switch mechanism.
I wish I would have seen the idea of putting valve tied to the igniation switch before I bought the new valve.
-
Jon’s neighbor probably drives a single fuel (or dedicated) CNG powered trucks. There are also engine that uses a combination of CNG and diesel (typically higher horsepower, over 375) and when the CNG runs out, they can run on diesel only which of course is more readily available.
The dedicated CNG truck shouldn’t need to be towed when out of CNG. Another CNG truck with a strong or full load of CNG should be able to have its CNG tank hooked to the tank of the empty truck and “share” its CNG with the empty truck until the empty truck has enough CNG to get to a CNG fueling location.
The CNG infrastructure is getting stronger and stronger every day. More and more regional and national transportation fueling companies are adding CNG on a regular basis.
One subtle benefit of CNG is that CNG is delivered to the refueling station via existing underground pipelines and not via tankers on the highways and streets.
Jon … ask your neighbor to visit his truck. I’d be interested to hear your comments on the “noise” and “smell” of a CNG truck versus a diesel truck.
-
I can’t speak to the ease of a mod, but the brakes on my ’99 (steer and tag discs, drive drums) seem far superior to the all drum setup on my old ’89. Obviously, I also have ABS on the ’99 and have used it once. The ’89 didn’t need ABS—it was virtually impossible to lock the brakes.
-
I really like the way No Rally rallies work. This one was almost perfect. Add 1 day so most people could be there 2 full days. Arrivial day is always a rush to get parked and cleaned up before Meet and Greet at 4 or 5 PM.
Day 1 Arrivial and Meet and Greet
Day 2 Morning round table, seminars, etc.
Afternoon, walk around and visit everyone at coaches, get to know new faces, 5 PM happy hour get together
Day 3 Repeat day 2, except, 4 PM happy Hour, 5 PM catered dinner or pot luck dinner
Day 4, good bye breakfast or social and depart
Day 2 & 3 afernoons would also be a good time to go site seeing, or have coach worked on by vendors.
Rudy was a big help to me on my Aqua Hot. He solved a problem that has been driving me crazy for about a year. Would be nice if we could get Rudy and other vendors to show up and deal with small issues.
Some structure in the schedue that gets everyone together for social time and a lot of free time to wander around and visit seems to work for most of us. Too much in the schedule makes it hard to find time to visit and explore. But most of us do benefit from the eductional aspect of the round table descussions, just set a time limit on how long.
-
I don’t have a dog in the fight, but don’t feel balancing media are a bad thing.
The bad thing is a stupid dealer whose employees apparently are clueless.
There are numerous brands of balancing media and I have used several with success. The key however is to put in the correct amount, and to use only valve stem cores with mech filters or screens.
They are applied by the bagful which is the prescribed amount and placed in the tire before it is aired up. It will break and distribute the media as necessary to produce a smooth ride. The valve core needs to the screen to keep the valve core seal leak free.
I have used Equal for about 17 years with no issues and was very satisfied. I use Centrimatics now because the coach came with them and see no difference in quality of balancing.
-
Dick
MemberApril 18, 2015 at 9:37 am in reply to: What “was” this? Win a free one year PC membershipYea, Vanner monitor. I remember reading the reason for the recall was the sealing clear resin protecting components. visable on the back side can under certain conditions start on fire.
And I qualify as a non professioal, don’t know anything, out of touch, old fart …..just ask our 21 year old son who knows everything.
-
Ah, the TRUTH about Nancy NOT wanting slides is finally coming out. Scrooge McDuck Tom, just wants to keep all that Dues Money stashed in his 401K.