Just to confirm what you’re saying, air pressure in the brake system (primary/secondary) comes up normally but the suspension never airs up (i.e. comes up to travel height)? Is that correct?

Glad you got the suspension air’d up.

I misspoke earlier, airing up FROM THE AUX side of the system (suspension) will not air up the primary side of the system (i.e. the brake reservoirs) due to the PPV valve just upstream of the chassis aux tank. Under normal operation the bus is air’d up from the primary side and when the PPV see’s ~75psi…

Read more

found it. Clicking the profile of someone you’re ‘connected’ to will provide several clickable options. Under ‘timeline’ you now how the ability to message that person directly.

Received a few connection request, which after accepting doesn’t appear to enable any new DM type comms. Maybe it’s hidden in a menu somewhere.

I believe a PPV just before the chassis aux tank will open allowing a back fill and the chk valves in front of the primary,secondary, and wet tanks are directional towards the tanks.

That’s also what would happen if you were airing up via your aux compressor … right? And if the key is on the norgrens would open allowing complete air up of…

Read more

good question, maybe through the ‘connect’ function?

30 lbs for brakes or suspension/aux or both?

For clarity sake, are all prior images gone?

*update* I just did a search and found some pre-migration images.

I’m with ya.

What makes this even more discouraging is that this is basic stuff. If a ‘development team‘ with past forum experience is involved, that team would have surely understood the importance of time and date stamp. If they didn’t, I would question their experience. If they did, but a design decision was made by the admins to…

Read more

Admins, is there an update on this? Not knowing the time and date of the post you’re replying to is frustrating.

From @jessica “First option would be expanding those profiles to include more info like bios, RV descriptions, or other details. This is already built into the software, so it’s pretty straightforward to set up.

The other route would be creating custom signature boxes that work more like the old forum. This would require some custom development…

Read more

Not seeing it.

Was that a design decision? Was the consensus it’s not needed?

I found it helpful. Seems to be on most heavily utilized forums I participate in.

reply post – looking for time and date stamp.